_1711419078__03971.original.png "Thermo Keytek")
-
Thermo Keytek EMCPro Plus EMC Immunity Test System
SKU: 11054
Test Capabilities: Surge Immunity (Combo/Ring/Telecom Waves), EFT/Burst, Dips Interrupts & VariationsStandards Met: IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11Max EUT Voltage (w/ Built in CDN): 250 VoltsMax EUT Current (w/ Built in CDN): 16 AmpsEFT/Burst Pulse Output Capability: 4 kVCombination/Wave Surge and Ring Wave: 6 kV$1,695.00In Stock -
$495.00In Stock -
KeyTek CM-3CD-32 Coupler/Decoupler, 3 Phase
SKU: 8936
EFT Waveform: 5/50 nsSurge Waveform: Combination wave: 1.2/50µs open-circuit voltage, 8/20µs short-circuit currentMax. Surge Voltage and Current: 6.6 kV, 3.3k AMax. EFT Voltage: 4.4 kVCoupler/Decoupler AC Voltage: 50 to 250V, 50/60Hz line to ground, 50 to 433V line to lineCoupler/Decoupler AC Current: 32A/phase continuousMinimum System Requirements: KeyTek EMCPro PLUS or any simulator with EFT test capabilityTest Standards: IEC 61000-4-4, IEC 61000-4-5IN STOCK -
Thermo Keytek ECAT High Voltage Burst/EFT Generator
SKU: 131312
Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4Burst frequency: Adjustable from 1 kHz to 1 MHz up to 4.4 kV; 1 kHz to 250 kHz from 4.4 kV to 8.0 kVBurst time: 1 to 360 sec.; 1 second resolution 1 to 240 min.; 1 minute resolution 1 to 24 hours; 1 hour resolutionPolarity: Positive, negative, alternatingPulse amplitude: 200V to 8.0kV, ±10%; 5 V resolutionStandards Met: IEC 61000-4-4, IEC 61000-4-5, IEEE C62.41, UL 864, ANSI/IEEEC62.41, UL 1449In Stock -
Keytek E503 Ring Wave Simulator for ANSI/IEEE C62.4 and UL 864
SKU: 10546
Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.Pulse repetition: 1 shot/9 secondsPulse voltage (open circuit): 200V - 6.6kV ± 10%Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864Equipment Group: Ring Wave Generators/SimulatorsIN STOCK -
Keytek (Thermo Fisher) EMCPro for Surge, Burst, & PQF
SKU: sku-582
Immunity Applcations: Surge Immunity (Combo/Ring/Telecom Waves), EFT/Burst, Dips Interrupts & VariationsEMC Standards: IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11Weight: 39 kg (85 lb)Application/Test Type: CE Marking - Safety and EMC DirectivesBurst frequency: 1-100 kHz, in 0.5k Hz steps, ±10%Mains & EUT Connections: Nema, British, SchukoIn Stock -
Thermo Keytek E510A 10kV Surge Generator
SKU: 10799
Standards Met: ANSI/IEEE C62.41 Cat. B and IEC 61000 4-5Phase synchronization: ±15° with optional coupler/decouplerPulse current (short circuit): 8/20µs, 0-5.05kA with 2 ohm effective source impedance, ±10%Pulse repetition: 1 shot/18 secondsPulse voltage (open circuit): 1.2/50µs, 0-10.1kV ±10% in 1 volt stepsRepetition time: Adjustable from 300ms to 5s; 1ms resolutionTypically In Stock -
Thermo Keytek ECAT Transient Generator System
SKU: 11321
Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.Pulse repetition: 1 shot/9 secondsPulse voltage (open circuit): 200V - 6.6kV ± 10%Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864In Stock -
Keytek (Thermo Fisher) CE Master for EFT, Surge, PQF
SKU: sku-583
Immunity Applcations: Surge Immunity (Combo/Ring/Telecom Waves), EFT/Burst, Dips Interrupts & VariationsEMC Standards (Previous Editions): IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11Weight: 29kg (64 lbs)EFT/Burst Output: 500V - 4.4kVSurge Output: 250V - 2.5kVVoltage Drops: 70%, 40%$9,750.001 Unit Available