Test Applications

Test Applications Test Equipment, Systems & Solutions

• 

  3ctest CST 20150D IEC 61000-4-39 Conducted Immunity Tester

  SKU: 55121

  Test Standards: IEC 61000-4-39, IEC 61000-4-6

  Applications: Conducted Immunity

  2-3 Months

  VIEW PRODUCT Cart

• 

  Wavecontrol WPF6-HP Electric Field Probe for SMP Meters

  SKU: 4423

  Frequency range: 100 kHz - 6 GHz

  Resolution: 0.02 V/m (until 7.5 V/m), 0.1 V/m (from 7.5 V/m to 130 V/m)

  Dynamic Range: 70 dB

  Sensitivity: 0.3 V/m

  Measurement Range: 0.3 – 1000 V/m (CW), 0.3 – 20 V/m (RMS)

  Linearity: ± 0.5 dB (0.5 V/m – 100 V/m)

  Isotropic deviation: ± 1.2 dB (@ 2 GHz)

  Attenuation at 50/60 Hz: > 80 dB

  Cost New:

  Was:

  Price Now:

  $695.00 - $995.00

  In Stock

  ORDERING OPTIONS

• 

  ABL6G Active Bilog Antenna for Radiated Emissions

  SKU: 23630-1

  Applications: Radiated Emissions, Military & Aviation EMC Testing

  Test Standards: FCC Part 15, MIL-STD-461

  Frequency Range: 25 MHz - 6 GHz

  Connector: N-type (to Analyzer/Receiver)

  Typically In Stock

  VIEW PRODUCT Cart

• 

  FCC F-140 Bulk Current Injection Probe

  SKU: 15365

  Applications: RF Current Monitoring, EMC BCI Tests, Military EMC Testing

  Maximum input power: 100 Watts

  Test Standards: ISO 11452-4, IEC 61000-4-6 BCI, DO-160 Section 20, MIL-STD-461 CS114

  Hole Diameter: 1.57" ( 40mm )

  Frequency Range: 10 kHz - 1 GHz

  IN STOCK

  VIEW PRODUCT Cart

• 

  AE Techron T2000 Low-Frequency Conducted Susceptibility Transformer

  SKU: 8758

  Applications: LF Conducted Susceptibility

  Test Standards: DO 160 Sec 16 & , Mil-STD 461 CS 101 & CS 109

  Frequency Range: 10 Hz to 250 kHz

  RF Power: 200 Watts

  Typically In Stock

  VIEW PRODUCT Cart

• 

  EM Test Voltage Transient Emissions Tester AN 200

  SKU: 1226

  Voltage Range: 0-30 VDC

  Rated Current: 25 A

  Peak Voltage: 1000 V

  Dimensions: Dimensions: (L x B x H): 425 x 530 x 180 mm

  Inductance: (5 µH/5 mΩ)

  In stock

  VIEW PRODUCT Cart

• 

  RFPM1G-1000 Digital Power Meter with Directional Coupler

  SKU: 4044

  Frequency Range: 20 MHz to 1 GHz

  RF Power Rating: 1000 W

  Applications: Radiated Immunity, RF Conducted Immunity

  In Stock

  VIEW PRODUCT Cart

• 

  RayZone1800 Compact and High-Precision OTA Quick Test System

  SKU: 31446

  Inquire for Lead Time

  VIEW PRODUCT Cart

• 

  EM Test VCS 500 M10 10kV Combination Wave Surge Immunity Generator

  SKU: 17287

  Test Standards: IEC/EN 61000-4-5, IEC/ISO 60601-1-2

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Application Notes: EMC Surge Immunity Test Setup, CE Marking

  Mains & EUT Connections: External Coupler Only

  Phase synchronization: asynchronous, synchronous 0 to 359º (in 1º steps)

  Polarity: pos / neg / alternate

  Pulse current (short circuit): max. 5,000A ± 10%

  Pulse repetition: 1s - 999s, depending on the voltage

  Pulse voltage (open circuit): 500V - 10,000V ± 10%

  Supply Voltage: 115/230V +10/-15%

  Test duration: 1 - 30,000 or endless

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Boonton 4232A 2 Channel RF Power Meter

  SKU: 30075

  Measurement Range: 10 kHz to 100 GHz

  Dynamic Range: 90 dB (sensor dependent)

  Power Measurement Range: -70 dBm to +44 dBm

  Applications: Radiated Immunity, RF Conducted Immunity

  Channels: 2

  Typically in Stock

  VIEW PRODUCT Cart

• 

  TDK EFG-03 High Power E-Field Generator 10 kHz - 100 MHz, up to 500 V/m

  SKU: 9091

  Weight: 68 kg (150 lbs.)

  Connector type: 7/16 female

  Test Standards: MIL-STD-461 RS103, DO-160

  Applications: Radiated Susceptibility

  Built in Load: Yes

  Max Radiated Field Strength: 500 V/m

  Typically In Stock

  VIEW PRODUCT Cart

• 

  EM Test LD 200N Load Dump Generator for ISO 16750-2

  SKU: 5955

  Output: +/- output Safety laboratory connectors Coupling To the battery +lineDecoupling Via diodeDUT supply Max. 80V/30A

  Freestyle Mode Micropulses: Rise time 1us 10us - 90us with 10us steps 100us - 900us with 100us steps 1ms - 10ms with 1ms steps Pulse duration 10ms - 1,200ms Int. resistor 0.5ohm - 38ohm, in steps of 0.1ohm

  Test Standards: ISO 7637-2 Pulse 5b for 12V and 24V, ISO/WD 16750 Pulse 5b, and much more

  Test Routines: Quick Start, User Defines Routines, Standards Test Routines Service

  Cost New:

  Was:

  Price Now:

  $1,690.00 - $2,290.00

  Typically In Stock

  ORDERING OPTIONS