Teseq (Schaffner) EMC Test Systems - Rentals

Teseq (Schaffner)

(Showing 12 of 93)

Schaffner/Teseq EMC Test Equipment Rentals Ship Same Day

TESEQ EMC TEST EQUIPMENT IN STOCK

Teseq, a division of Ametek CTS, offers one of the most comprehensive range of EMC systems for immunity and emissions testing. Their unique “modular” approach to EMC allows engineers to buy only what they need with the ability to easily upgrade as their needs change and expand. Recently acquired by Ametek, completing the Compliance Test Systems division alongside EM Test, Milmega and IFI amplifiers. And Now Amplifier Research.

Rentals Ship Today

The EMC Shop has a large inventory of Teseq equipment that is available for rental or purchase (Used).

About Renting

Amplifier Research

The top of the line amplifier in the EMC market. The EMC Shop has invested more money in Amplifier Research products than any other manufacturer.

Amplifier Research

The EMC Shop supports testing using Teseq RF conducted immunity test equipment

RF Conducted Immunity Setup Support

Meet Common Test Standards

Teseq (Schaffner) Categories

Teseq Surge Generators

Teseq ESD Guns

Teseq Automotive Transient Generators

Teseq Absorbing Clamps / Ferrite Tube

Teseq RF Test Equipment

Teseq Dips, Interrupts & Variations Equipment

Teseq Oscillatory Waves Generators

Teseq Ring Wave Generators

Teseq Current Probes

Teseq EMC Antennas

Teseq (Schaffner) Test Equipment, Systems & Solutions

Teseq MD 102A ESD Pulse Measurement Target for IEC/EN 61000-4-2

SKU: sku-887

Inquire for Lead Time

VIEW PRODUCT Cart
Teseq CIP 9136A Bulk Current Injection Test Clamp

SKU: 8766

Weight: 2 kg (4.4 pounds)

Aperture: 43 mm (1.7 inches) inside; 113 mm (4.44 inches) outside

Application/Test Type: Injecting current levels up to 1 kW per Qinetiq and meets HIRF testing Ideal for automotive BCI testing

Connector: N-Type up to 1,000 Watts

Dimensions: 61 mm wide (2.4 inches)

Frequency Range: Features & Specifications of Teseq CIP 9136A:

Impedance: 100 Ω typical at resonance

Standards Met: ISO 11452-4, IEC 61000-4-6

Additional Standards Met: RTCA DO-160 Section 20, MIL-STD-461

Cost New:

Was:

Price Now:

$440.00 - $4,400.00

Typically in Stock

ORDERING OPTIONS
Teseq NSG 3040 Transient Immunity Test System

SKU: 4141

Test Capabilities: Combination Wave Surge Immunity, EFT/Burst, Dips Interrupts & Variations

Standards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11, IEC 61000-4-29

Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

Max EUT Voltage (w/ Built in CDN): 264 Volts

Max EUT Current (w/ Built in CDN): 16 Amps

EFT/Burst Pulse Output Capability: 4.8 kV

Combination/Wave Surge Output Capability: 4.4 kV

Generic Standards: IEC 61000-6-1, IEC 61000-6-2

Cost New:

Was:

Price Now:

$1,495.00 - $17,750.00

In Stock

ORDERING OPTIONS
Schaffner CBA 9479 100 kHz - 1 GHz RF Amplifier

SKU: 11713

Output Power: 50 Watts P1dB (70 Watts typ.)

Applications: Radiated immunity Testing

Flatness: ± 1.5 dB

Frequency Range: 10 kHz - 1 GHz

Gain: 47 dB minimum (20dB adjustable)

Impedance: 50 ohms

RF Connector: Type N female

RF Input Voltage: 1.0 milliwatt maximum for rated output

Test Standards: IEC 61000-4-3, IEC 61000-4-6, ISO 11452-4, DO-160 Section 20

1 Unit

VIEW PRODUCT Cart
Schaffner NSG 2025-4 EFT / Burst Generator Built in Three Phase Coupler

SKU: 11294

Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

Burst frequency: 0.1 kHz - 1,000 kHz

Burst time: Rise Time: 5ns ±20% (50 W, 10 - 90%) Pulse Width: 50ns ±30% (50 W and 1 W), 100ns ±50% open circuit

Coupling: Line to reference ground (IEC 1000-4-4), selected lines together to reference ground, all lines to reference ground (common mode)

Mains & EUT Connections: HV Coax (Direct); L, N and PE via Coupler

Phase synchronization: Asynchronous/synchronous 0 - 360° ±2°

Polarity: Positive/Negative

Pulse amplitude: 200 Volts - 4.5 kV (20 Volt Steps)

Repetition time: 100ms to 10s

Test duration: 1 to 150 pulses (15ms burst duration as per IEC 61000-4-4 up to 10 kHz)

Cost New:

Was:

Price Now:

$975.00 - $6,750.00

In Stock

ORDERING OPTIONS
Teseq INA 701 Magnetic Field Coil for IEC 61000-4-8 and IEC 61000-4-9

SKU: 30172

Max. Contin. Frequency Current Supply: 10 A

Max. Short Term Frequency Current Supply: 30 A (3 s)

Max. Contin. Frequency Field Strength Supply: 330 A/m

Max. Short Term Frequency Field Strength Supply: 11100 A/m

Applications: Radiated Immunity

Test Standards: EN/IEC 61000-4-8, EN/IEC 61000-4-9

Inquire for Availability

VIEW PRODUCT Cart
Teseq NSG 4070C-110 RF Conducted Immunity System

SKU: 11240

Videos: Calibration Example, Remote Operation Setup

Standards Met: IEC/EN 61000-4-6, ISO 11452-4

Applications: RF Conducted Disturbances, Vehicle Component Disturbance Testing, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

Frequency Range: 10 kHz - 400 MHz

Internal Amplifier: 110 Watts

Inquire for Availability

VIEW PRODUCT Cart
Teseq HLA 6121 60 cm Loop Antenna 9 kHz to 30 MHz

SKU: 10128

Weight: approx. 2 kg

Dimensions: L x W: 620 mm x 700 mm

Frequency Range: 9 kHz to 30 MHz

Impedance: 50 Ω

Applications: Radiated Emissions, Military & Aviation EMC Testing

Compliant Standards: CISPR 11, CISPR 16-1-4, CISPR 16-2-3, FCC 18 and others

Inquire for Availability

VIEW PRODUCT Cart
Teseq NSG 3060A Modulator Solution For 6 kV Applications

SKU: 11779

Inquire for Lead Time

VIEW PRODUCT Cart
Teseq (Schaffner) NSG 2050 System PNW 2050 w/ CDN 131/133

SKU: 11050

Standards Met: IEC/EN 61000-4-5, IEC/ISO 60601-1-2

Applications: EMC Surge, CE Marking, Surge Immunity

Max EUT AC Voltage (W/ Built In CDN): 690 Volts

Max EUT AC Current (W/ Built In CDN): 32 Amps

Max EUT DC Voltage (W/ Built In CDN): 270 Volts

Max EUT DC Current (W/ Built In CDN): 16 Amps

Combination/Wave Surge Output Capability: 4.4 kV

External Coupling: Data Lines (Surge), 3PH EUT

Warranty: 100 Days

Condition (5-10 Scale): 8

Equipment Group: Combination Wave Generators

Test Setup: Surge Immunity Test, Setup, Equipment

Cost New:

Was:

Price Now:

$5,975.00

1 System Left
Teseq LNA 6000 Low Noise Amplifier 1 MHz to 3 GHz

SKU: sku-80

Weight: approx. 127 grams (0.3 Lb's)

Application/Test Type: Increase the sensitivity of virtually all spectrum analyzers and other RF measuring instruments.

Dimensions: 28 mm x 95 mm x 27 mm

Frequency Range: 1 MHz to 3 GHz (nominal range) 200 kHz to 4 GHz (utilizable range)

Gain: 12.5 dB (±0.3 dB flatness)

Input: 0 dBm (107 dBμV)

Maximum Continuous Power: 12.5 dBm @ 1 dB compression

RF Connector: IN: N-type (f); OUT: N-type (m)

Inquire for Availability

VIEW PRODUCT Cart
Teseq MD 101 ESD Pulse Measurement Target

SKU: sku-33

Inquire for Lead Time

VIEW PRODUCT Cart