CISPR 25 ALSE Test Chamber Build & Install

CISPR 25 ALSE Test Chamber Build & Install

Condition:
New

No reviews yet Write a Review
Frequency Range:
DC - 40 GHz
Isolation:
100-110 dB typical (75 dB min in the Magnetic Field)

 

Availability:

1-6 Months

SKU:
11326

 

Getting Started...

Check out our Google Reviews

Overview

The EMC Shop personnel have an assortment of tools to provide an ideal CISPR 25 ALSE Test Chamber Build & Install. We provide Compact anechoic chambers, Semi-anechoic chambers, 1M Anechoic chambers, 3 Meter Anechoic Chambers, 5M Anechoic chambers, 10M Anechoic chambers.

Starting with a modular shielded room (or occasionally a welded room) that is lined inside with RF and/or microwave absorbing ("Anechoic") material.

Depending on the purpose of the room, anechoic material may be placed on the walls and ceiling (usually referred to as "Semi-Anechoic") or it can be placed on all six sides of the room (As known as "Fully Anechoic").

RF shield room Shielding Properties (dB)
Magnetic field 14kHz 75dB
100KHz 100dB
200KHz 110dB
Plane wave 50-103MHz 120dB
Microwave 1-10GHz 110dB
10-20GHz 100dB
20-40GHz 80dB

Videos

Key Considerations

Frequency Range:
DC - 40 GHz
Isolation:
100-110 dB typical (75 dB min in the Magnetic Field)

Related EMC Equipment & Solutions

RF/EMC Anechoic Test Chamber Build and Installs

RF/EMC Anechoic Test Chamber Build and Install

SKU: sku-1326

Test Standards: CISPR 25, MIL-STD-461, IEC 61000-4-3, CISPR 16 and more
Chamber Sizes: 1 meter and 3 meters (10 meters coming soon)
Frequency Range: 30 MHz - 100 GHz
Chamber Types: Anechoic, Semi-Anechoic, Reverberation, Tent/Portable
Faster Than Most!
View Product
Rohde & Schwarz ESRP3 EMI Test Receiver per CISPR 16-1-1

Rohde & Schwarz ESRP3 EMI Test Receiver per CISPR 16-1-1

SKU: 11695

Frequency Range: 9 kHz to 3.6 GHz
SSB Phase Noise: –90 dBc (1 Hz) (typ.)
Frequency Response: 9 kHz ≤ f < 100 kHz < 4 dB
Dynamic Range: RBW = 1 kHz, f > 10 MHz 110 dB
Harmonics, nonharmonic spurious: output level = –10 dBm –30 dBc
RF Output Connector: N female, 50 Ω
Test Standards: CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461 and FCC
Inquire
View Product
Teseq CDN M216 1kV CDN for CISPR 16-1-2, CISPR 16-2-1 and CISPR 15

Teseq CDN M216 1kV CDN for CISPR 16-1-2, CISPR 16-2-1 and CISPR 15

SKU: sku-86

Weight: 700 grams (1.5 LB.'s)
Application/Test Type: Emission measurement (CDNE) to measure disturbance voltages in the 30 to 300 MHz frequency range.
Common Mode Impedance: 150 Ω +10/-20 Ω
Current Rating: 10 Amps Maximum
Decoupling of Common Mode Disturbance: Greater than 30 dB
Dimensions: 4.1 x 3 x 5 inches (10.5 x 7.5 x 12.5 cm)
Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
Insertion Loss: Greater than 0.1 dB
Mains & EUT Connections: 4 mm, safety
RF Connector: BNC, 50 Ω
RF Input Voltage: Less than 30 V
Standards Met: IEC 61000-4-6, CISPR 16-1-2, CISPR 16-2-1 and CISPR 15
Voltage Division Factor: 20 dB ±1.5 dB
Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec
View Product