Teseq CDN M016 Switchable 16 Amp Coupling/Decoupling Network

Teseq CDN M016 Switchable 16 Amp Coupling/Decoupling Network

Condition:
Used
Weight:
3.3 Lbs (1.5 kg)
Application/Test Type:
switchable 2 or 3 power lines, (L+N or L+N+PE)
Common Mode Impedance:
150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
Current Rating:
16 Amps
Decoupling of Common Mode Disturbance:
150 kHz: Greater than 30 dB 1.5 MHz: Greater than 60 dB 30 MHz: Greater than 40 dB 230 MHz: Greater than 20 dB
Dimensions:
3.9" x 3.9" x 9.5" (100 mm x 100 mm x 240 mm)
Frequency Range:
150 kHz to 230 MHz
Insertion Loss:
Less than 0.1 dB
Mains & EUT Connections:
4 mm banana
RF Connector:
BNC 50 Ω
RF Input Voltage:
30 Volts (Max)
Standards Met:
IEC/EN 61000-4-6
Voltage Division Factor:
150 kHz to 80 MHz: 9.5 dB ±1 dB 80 MHz to 230 MHz: 9.5 dB +3 dB / -2 dB
Voltage Rating:
AC max. voltage (line to ground): 250 V DC max. voltage (line to ground): 400 V; 3 kV DC, 2 sec
Manufacturer:
Teseq
Online Orders Ship Same Day
$395.00

 

SKU:
sku-827-MO-NO
Availability:

Typically In Stock

Getting Started...

Overview

About the Teseq CDN M016:

IEC/EN 61000-4-6 specifies the design and performance of a range of coupling/decoupling networks (CDNs). Each CDN is specific to the type of cable and the intended signal carried on the cable. Teseq offers an extensive range of CDNs which fully comply with the requirements of the standard and provide a simple and reliable method of injecting RF energy into the equipment under test (EUT).

Whilst the published standard only specifies the performance of CDN from 150 kHz to 80 MHz, most of Teseq CDNs are specially designed to give the same performance to a wider frequency range. This is required by some product specific standards. Each CDN is also useable for emission testing. Special types meet the requirements of CISPR 15 or can be used as impedance stabilization network (ISN) defined in CISPR 22.

Conducted
Immunity & Susceptibility

Common Inhouse Precompliance Equipment

The EMC Shop Rental & Delivery

Included with the Teseq CDN M016:

  • M016 CDN
  • QTY 2 CAL U100B
  • SAR MA31
  • QTY 2 SAR M300
  • SAR M116
  • A 50-N
  • NIST Calibration with Data
  • Carrying Case
  • User Manual

All those part numbers confusing? Those are all the cal adapters required to get up and running

How to Rent the Teseq CDN M016:

  • Learn more about renting EMC equipment
  • Click "Add to Cart" above
  • Register or Check Out as a Guest
  • Select Shipping Method (use "My Account" and input your account # and method)
  • Order Confirmation and Tracking Info Follows

Compatible with:

The EMC Shops RFCI-75 RF Conducted Immunity Generator, 100 kHz - 400 MHz

Teseqs NSG 4070 Test System for Conducted & Radiated Immunity

RFCI-75 RF Conducted Immunity Generator, 100 kHz - 400 MHz
Rent Teseq NSG 435 ESD Gun
PHFA Harmonics and Flicker System for Single Phase EUT
RFCI-75 RF Conducted Immunity Generator, 100 kHz - 400 MHz
RFCI-75 RF Conducted Immunity Generator, 100 kHz - 400 MHz
Rent Teseq NSG 435 ESD Gun
PHFA Harmonics and Flicker System for Single Phase EUT
RFCI-75 RF Conducted Immunity Generator, 100 kHz - 400 MHz

Videos

Key Considerations

Manufacturer:
Teseq
Weight:
3.3 Lbs (1.5 kg)
Application/Test Type:
switchable 2 or 3 power lines, (L+N or L+N+PE)
Common Mode Impedance:
150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
Current Rating:
16 Amps
Decoupling of Common Mode Disturbance:
150 kHz: Greater than 30 dB 1.5 MHz: Greater than 60 dB 30 MHz: Greater than 40 dB 230 MHz: Greater than 20 dB
Dimensions:
3.9" x 3.9" x 9.5" (100 mm x 100 mm x 240 mm)
Frequency Range:
150 kHz to 230 MHz
Insertion Loss:
Less than 0.1 dB
Mains & EUT Connections:
4 mm banana
RF Connector:
BNC 50 Ω
RF Input Voltage:
30 Volts (Max)
Standards Met:
IEC/EN 61000-4-6
Voltage Division Factor:
150 kHz to 80 MHz: 9.5 dB ±1 dB 80 MHz to 230 MHz: 9.5 dB +3 dB / -2 dB
Voltage Rating:
AC max. voltage (line to ground): 250 V DC max. voltage (line to ground): 400 V; 3 kV DC, 2 sec

Related EMC Equipment & Solutions

Teseq CDN ST08 Coupling Decoupling Network - The EMC Shop

Teseq CDN ST08 Coupling Decoupling Network

SKU: 8413

Frequency Range: 10 kHz to 80 MHz
Application: CDN for screened eight lines with RJ45 connector
Current Rating: 1000 mA
EUT Connector: BNC 50 Ω
Common mode impedance (EUT Port) 10 kHz to 26 MHz: 150 Ω ±20 Ω
Common mode impedance (EUT Port) 26 MHz to 80 MHz: 150 Ω +60 Ω /-45 Ω
RF Voltage: <20 V
$1,600.00
Typically in Stock
Teseq CDN M316 Coupling/Decoupling Network (CDN) CDN M3 Type

Teseq CDN M316 Coupling/Decoupling Network (CDN) CDN M3 Type

SKU: sku-224

Weight: 700 grams (1.5 LB.'s)
Application/Test Type: 3 power lines, (L+N+PE), (2L+PE), (Optional L+L+L)
Common Mode Impedance: 150 Ω +10/-20 Ω
Current Rating: 10 Amps Maximum
Decoupling of Common Mode Disturbance: Greater than 30 dB
Dimensions: 4.1 x 3 x 5 inches (10.5 x 7.5 x 12.5 cm)
Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
Insertion Loss: Greater than 0.1 dB
Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)
RF Connector: BNC, 50 Ω
RF Input Voltage: Less than 30 V
Standards Met: IEC 61000-4-6, CISPR 16-1-2, CISPR 16-2-1 and CISPR 15
Voltage Division Factor: 20 dB ±1.5 dB
Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec
View Product Cart
Teseq CDN M416 4-Line Coupling/Decoupling Network

Teseq CDN M416 4-Line Coupling/Decoupling Network

SKU: sku-225

Weight: 700 grams (1.5 LB.'s)
Application/Test Type: 3 power lines, (L+N+PE), (2L+PE), (Optional L+L+L)
Common Mode Impedance: 150 Ω +10/-20 Ω
Current Rating: 10 Amps Maximum
Decoupling of Common Mode Disturbance: Greater than 30 dB
Dimensions: 4.1 x 3 x 5 inches (10.5 x 7.5 x 12.5 cm)
Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
Insertion Loss: Greater than 0.1 dB
Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)
RF Connector: BNC, 50 Ω
RF Input Voltage: Less than 30 V
Standards Met: IEC 61000-4-6, CISPR 16-1-2, CISPR 16-2-1 and CISPR 15
Voltage Division Factor: 20 dB ±1.5 dB
Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec
View Product View Product
Teseq CDN M532 5-Line/32 Amp RF Coupling/Decoupling Network

Teseq CDN M532 5-Line/32 Amp RF Coupling/Decoupling Network

SKU: sku-2093

Weight: 6.5 kg
Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
Current Rating: 32 Amps Maximum
Decoupling of Common Mode Disturbance: Greater than 30 dB
Dimensions: 6.3 x 6.3 x 20 inches (16.0 cm x 16.0 cm x 50.0 cm)
Insertion Loss: Greater than 0.1 dB
Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)
RF Connector: BNC, 50 Ω
RF Input Voltage: Less than 30 V
Standards Met: IEC 61000-4-6
Voltage Division Factor: 10 dB +3 dB / -1 dB
View Product View Product
Teseq CDN M432 32 Amp Coupling/Dcoupling Network

Teseq CDN M432 32 Amp Coupling/Dcoupling Network

SKU: sku-226

Weight: 6.5 kg (14.3 LB.'s)
Application/Test Type: 4 mains AC power lines emissions testing up to 32 Amps (2L+N+PE), (3L+PE), optional (3L+N)
Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
Current Rating: 32 Amps Maximum
Decoupling of Common Mode Disturbance: Greater than 30 dB
Dimensions: 6.3 x 6.3 x 20 inches (16.0 cm x 16.0 cm x 50.0 cm)
Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
Insertion Loss: Greater than 0.1 dB
Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)
RF Connector: BNC, 50 Ω
RF Input Voltage: Less than 30 V
Standards Met: IEC 61000-4-6
Voltage Division Factor: 10 dB +3 dB / -1 dB
Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec
View Product View Product
Teseq CDN AF Series Coupling/Decoupling Network for Unscreened/Unbalanced Lines

Teseq CDN AF Series Coupling/Decoupling Network for Unscreened/Unbalanced Lines

SKU: sku-230

Weight: 1.5 kg (3.3 lbs)
Application/Test Type: Coupling / decoupling network (CDN) used for all unscreened, unbalanced lines, carrying low current
Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 2300 MHz: 150 Ω +60 Ω / -45 Ω; 230 MHz to 300 MHz 1): 150 Ω +60 Ω / -60 Ω
Current Rating: 200 mA to 4 Amps (refer to data sheet for exact model specifications)
Decoupling of Common Mode Disturbance: 10 kHz: Over 10 dB:150 kHz: Over 35 dB: 26 MHz: Over 45 dB: 80 MHz: Over 25 dB;150 kHz: Over 30 dB: 1.5 MHz: Over 60 dB: 30 MHz: Over 50 dB: 230 MHz: Under 30 dB (refer to data sheet for some exceptions)
Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)
Frequency Range: 10 kHz to 80 MHz or 150 kHz to 230/300 MHz
Mains & EUT Connections: 4 mm banana or D-Sub 25 pins
RF Connector: BNC 50 Ω
RF Input Voltage: 30 Volts Max
Standards Met: IEC 61000-4-6, CISPR 15
Voltage Division Factor: 150 kHz to 80 MHz: 9.5 dB ±1 dB, 10 dB ±1 dB for CDN A501, A701, A801; 80 MHz to 300 MHz 1): 9.5 dB +3 dB / -2 dB 10 dB +3 dB / -2 dB for CDN A501, A701, A801; All other models 10 dB ±1 dB
Voltage Rating: AC max. voltage (line to ground): 63V - 160V; DC max. voltage (line to ground): 100V - 250V; Test voltage: 250 V - 400 V DC, 2 sec (refer to data sheet for exact model specifications)
View Product View Product
Teseq CDN HSS-2 Coupling Decoupling Network for High Speed Communication Lines

Teseq CDN HSS-2 Coupling Decoupling Network for High Speed Communication Lines

SKU: sku-114

Application/Test Type: ISDN, 10/100BaseT, 1000BaseT etc., switchable per jumper, PoE applicable; 2 kV* (1.2/50 ÎĽs pulse as per IEC/EN 61000-4-5); Max. surge test current: 50 A (8/20 ÎĽs pulse as per IEC/EN 61000-4-5)
Current Rating: 1 A (rated for Power over Ethernet)
Insertion Loss: 9 dB at 100 MHz
Mains & EUT Connections: RJ45 female; HV connector female (Fischer D103A023)
Standards Met: IEC 61000-4-5 Ed. 3
Voltage Rating: 100 VDC between pairs
$995.00
RENTAL ONLY
Ordering Options
Schwarzbeck CDN AF4 Coupling Decoupling Network - The EMC Shop

Schwarzbeck CDN AF4 Coupling Decoupling Network

SKU: sku-1201

Frequency Range: 0.15 - 230 MHz
Common Mode Impedance: 150 kHz – 24 MHz: 150 Ω ±20 Ω; 24 MHz–80 MHz: 150Ω +60Ω / -45 Ω; 80 MHz – 230 MHz: 150 Ω ±60 Ω
Max. RF Test Voltage (emf): 30 V
RF Input Power: 6 W (continuous)
RF Input Connector: 50 Ω BNC (female)
Typically In Stock
View Product Cart

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form