CISPR Test Equipment - The EMC Shop

CISPR Standards

(Showing 12 of 140)

CISPR standards are established, internationally accepted methods to test and comply products against EMC. Manufacturers will find these referenced in their product specific standard, with notes if any adjustments are to be made. The EMC Shop is well versed on CISPR Standards and supports customers to measure and evaluate their product in anticipation of a certificaition test. CISPR is for commercial electronics and automotive vehicles.

Learn More

The EMC Shop stocks test equipment to test and pre-certify products to CISPR standards.

Contact Form

CISPR Standards Categories

CISPR Standards Test Equipment, Systems & Solutions

Schwarzbeck CAT5 8158 8-Wire Impedance Stabilization Network

SKU: sku-1304

VIEW PRODUCT Cart
Teseq ISN S752 Impedance Stabilization Network for Coaxial Lines

SKU: sku-174

Weight: approx. 1.5 kg

Dimensions: (W x H x D): 100 mm x 100 mm x 240 mm

Frequency Range: 150 kHz to 230 MHz

Impedance: 150 Ω ±20 Ω

RF Input Voltage: 20 V

VIEW PRODUCT Cart
Rent Com-Power ISN-T8 for One, Two, Four, Unshielded Balanced Pair, CAT-3, CAT-5

SKU: 30150

Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]

Current Rating: 800 mA (per line), 1.6 Amps (per pair)

Dimensions: see photo in images

Frequency Range: 150 kHz to 30 MHz

Isolation: 150 kHz to 1.5 MHz: 35 to 55 dB 1.5 MHz to 30 MHz: 55 dB

Mains & EUT Connections: D-sub 25 pin female connectors

RF Connector: 50Ω N-type (female)

Standards Met: CISPR 16-1-2, CISPR 22

Voltage Rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)

Cost New:

Was:

Price Now:

$410.00 - $4,100.00

Typically in Stock

ORDERING OPTIONS
EM Test Automotive Transient Emission Set for ISO 7637-2

SKU: 30011

Applications: EV and Automotive

Test Standards: ISO 7637-2

Includes: AN 200N100 Artificial Network, BS 200N100.1 Electronic Switch, and BSM 200N40 Mechanical Switch (see specs in Overview)

Inquire for Availability

VIEW PRODUCT Cart
PMM (Narda) AS-02 Antenna Set, 30 MHz - 3 GHz, 75 Watts

SKU: 6598

Antenna Factor (1 Meter): -15 +2 dB typical (30 MHz - 200 MHz); 6 dB typical (200 MHz - 3 GHz)

Antennas: Kits & Sets

Application/Test Type: Radiated EMC

Connector: N-Type(female)

Dimensions: 65 x 65 x 137 cm (BC-01); 70 x 10 x 86 cm(LP-02)

Frequency Range: 30 MHz - 200 MHz/200 MHz - 3 GHz

Gain: 8 - 36 dB typical

Impedance: 50 Ω nominal

Maximum Continuous Power: 100 Watts up to 1 GHz (50 watts up to 3 GHz)

Inquire for Lead Time

VIEW PRODUCT Cart
Rent Com-Power LI-3P-132 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network

SKU: 11124

Weight: 27.5 lbs.

Application/Test Type: Power Line Conducted Emissions Tests

Current Rating: 32 Amperes

Dimensions: 19.3” x 13.9” x 2.3"

Frequency Range: 150 kHz to 30 MHz

Inductors: 50 µH

Insertion loss: less than 0.7 dB

Isolation: more than 40 dB

Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

RF Connector: RF Measurement Port 50Ω - N-Type (female)

Standards Met: ANSI C63.4, CISPR 16-1-2

Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

Inquire for Availability

VIEW PRODUCT Cart
LISN-CISPR16 25 Amp Line Impedance Stabilization Network 50μH/250μH

SKU: 12014

Weight: 28 lbs

Applications: EMC Conducted Emissions, Precompliance Testing

Frequency Range: 9 kHz - 30 MHz

Output Current: 25 Amp

Test Standards: CISPR 16 LISN

RF Connector: RF Out BNC Female, Test Item SHUKO Connector

In Stock

VIEW PRODUCT Cart
Com-Power EMC Testing Turntable TTW-104

SKU: 5102

Diameter: 4 feet (1.2 meters)

Height: 9 inches (23 cm)

Load Rating: 1000 lbs (455 kg)

RPM: 2.1

Remote Switch: Reversing drum

Weight: 149 lbs (68 kg)

Standards Met: CISPR 11, FCC

Applications: Radiated Immunity

Cost New:

Was:

Price Now:

$1,200.00 - $12,000.00

In Stock

ORDERING OPTIONS
Com-Power CLCE-438 RF Current Monitoring Probe

Top Frequency Range: 400 MHz

Bottom Frequency Range: 9 kHz

Applications: RF Current Monitoring, EMC BCI Tests, Military EMC Testing

RF Current Handling (CW/Pulse): 3/800 Amps

Test Standards: DO-160 Section 20, MIL-STD-461

AC Current Handling (DC-400Hz): 30/50 Amps

Diameter: 1.5"

In Stock

VIEW PRODUCT Cart
Rigol EMI Precompliance Test Equipment Bundle

SKU: 11165

Applications: EMC Precompliance Testing, Conducted Emissions, Radiated Emissions

Limit Lines: CISPR 11, MIL-STD-461, FCC Part 15 and more

Bundle Includes: DSA710, EMI-DSA800, NFP-3, S1210 EMIs, interconnect cables

Frequency Range: 100 kHz to 1 GHz

Cost New:

Was:

Price Now:

$259.00 - $1,295.00

Typically In Stock

ORDERING OPTIONS
Com-Power LI-3P-200 Series 3-Phase LISN's with 50/250 uH Inductor, FCC/EN/CISPR, up to 100 A, 150 kHz - 30 MHz

SKU: sku-603

Weight: 27.5 lbs.

Application/Test Type: Power Line Conducted Emissions Tests

Current Rating: up to 100 Amperes

Dimensions: 19.3” x 13.9” x 2.3"

Frequency Range: 9 kHz to 30 MHz

Inductors: 50 µH or 250 µH

Insertion loss: less than 0.7 dB

Isolation: more than 40 dB

Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

RF Connector: RF Measurement Port 50Ω - N-Type (female)

Standards Met: ANSI C63.4, CISPR 16-1-2

Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

VIEW PRODUCT Cart
Com-Power LI-3P-132 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network

SKU: sku-598

Weight: 30 lbs.

Application/Test Type: Power Line Conducted Emissions Tests

Current Rating: 32 Amperes

Frequency Range: 150 kHz to 30 MHz

Inductors: 50 µH

Insertion loss: less than 0.7 dB

Isolation: more than 40 dB

Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

RF Connector: RF Measurement Port 50Ω - N-Type (female)

Standards Met: ANSI C63.4, CISPR 16-1-2

Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

Cost New:

Was:

Price Now:

$6,495.00

ORDERING OPTIONS