-
Com-Power LIN-120A LISN for CISPR 16-1-2/ANSI C63.4 w/ built-in Transient Limiter
SKU: sku-15
Weight: 10 lbs (4.5 kg)Application/Test Type: Power line conducted emissions testsCurrent Rating: 20 Amps AC (rms) , 14 Amps DCDimensions: 6.6” x 14.3” x 13” (16.8 x 36.3 x 33 cm)Frequency Range: 150 kHz to 30 MHz -
Com-Power LI-125A 150 kHz - 30 MHz LISN, 50 uH, 25 Amps (Discontinued)
SKU: sku-12
Weight: 25 lbs. / 11.3 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 25 Amps (AC), 17 Amps (DC)Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cmFrequency Range: 150 kHz to 30 MHz -
Com-Power LIT-930A 9kHz to 30MHz Transient Limiter
SKU: 8409
Connector: N type (input and output)Dimensions: L 4.3” (100 mm) W 2.0” (50 mm) H 1.5” (35 mm)Frequency Range: 9 kHz - 30 MHzInput: 4 Watts CW (+36 dBm) ±50 VdcInsertion Loss: 10 dB +1.5 / -0.5 dB*$70.00Typically In Stock -
Com-Power PAM-103 1 MHz - 1 GHz Preamplifier
SKU: 110215
Weight: 3.3 lbs. (1.5 kg)Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC MeasurementsConnector: 50Ω N-Type (f)Dimensions: 7.5 x 5 x 3 inchesFrequency Range: 1 MHz - 1000 MHzInquire for Availability -
Com-Power CDN-M350E 150 kHz to 230 MHz Coupling Decoupling Network
SKU: 30077
Application/Test Type: RF Conducted Immunity TestingCurrent Rating: 50 AmpsFrequency Range: 150 kHz to 230 MHzMains & EUT Connections: 5.2 mm banana socket with shrouded sheathRF Connector: 50 Ω BNC (Female)Inquire for Lead Time -
Com-Power PAL-010 High Gain Preamplifier 100 Hz - 30 MHz
SKU: sku-367
Weight: 3.3 lbs. (1.5 kg)Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC MeasurementsBattery: Battery Pack: Two 6 V, 0.7 A NimHConnector: BNC (f)Dimensions: 7.5 x 5 x 3 Inch (9 x 13 x 7.6 cm) -
Com-Power LI-325C Line Impedance Stabilization Network
SKU: 10891
Application/Test Type: Power line conducted emissions testsCurrent Rating: 25 Amps (AC), 17 Amps (DC)Dimensions: 13 x 7.5 x 8 inches / 33 x 19 x 20 cmFrequency Range: 10 kHz to 400 MHzInductors: 5 µH (air-core)Inquire for Availability -
Com-Power PS-500 RF Near Field Probe Kit, 9 kHz - 5 GHz
SKU: 5785
Applications: EMC Precompliance Testing, Conducted Emissions, Radiated EmissionsTest Standards: CISPR, MIL-STD-461, FCCH-Field Loop Frequency Range: 9 kHz - 5 GHzE-Field Broadband Frequency Range: 50 kHz - 5 GHzE-Field Fine Tip Frequency Range: 100 kHz - 5 GHz$109.00In Stock -
Com-Power CGO-501 Comb Generator 1 MHz - 1 GHz in 1 MHz Steps
SKU: 11421
Weight: 2 lbs. / 0.9 kgAC Power Adapter: 6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 HzAntennas: 5 and 12 inch MonopoleApplication/Test Type: EMI Radiated Site Reference SourceBattery: 6V NiMH, 1 Ah$395.00 - $3,900.00Inquire for Availability -
Com-Power LI-3100 Line Impedance Stabilization Network
SKU: 11434
Applications: Conducted Emissions, BCI Testing , Automotive EV EMCTest Standards: CISPR 25, MIL-STD-461, ISO 7637-2Max EUT DC Voltage: 676 VoltsMax EUT Current: 100 AmpsMax EUT AC Voltage (60Hz/400Hz): 480 Volts$395.00Inquire for Lead Time -
Com-Power ISN-T8 Impedance Stabilization Network and Calibration Kit
SKU: 30149
Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]Current Rating: 800 mA (per line), 1.6 Amps (per pair)Dimensions: see photo in imagesFrequency Range: 150 kHz to 30 MHzIsolation: 150 kHz to 1.5 MHz: 35 to 55 dB 1.5 MHz to 30 MHz: 55 dBTypically in Stock -
Com-Power CDN-M1100 150kHz - 230MHz Single line Plus Neutral 100 Amp
SKU: 30076
Frequency Range: 150 kHz to 230 MHzCurrent Rating: 100 AApplications: RF Conducted Immunity TestingTest Standards: IEC 61000-4-6Common Mode Impedance 150 kHz - 26 MHz: 150Ω ± 20ΩInquire for Lead Time