EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  IFI M33 10 kHz to 230 MHz 35 Watt RF Power Amplifier

  SKU: sku-467

  Max Frequency: 230 MHz

  Min Frequency: 10 kHz

  Output Power: 35 Watts

  Applications: RF Conducted Immunity, Medical

  Standards: IEC 61000-4-6

  AC Input Power: 100-240V/1PH/300VA

  Gain: 45dB

  VIEW PRODUCT Cart

• 

  AR CI00 Series RF Conducted Immunity Systems

  SKU: 10420

  Test Capabilities: RF Conducted Immunity

  Standards Met: IEC/EN 61000-4-6, CS114, ISO 11452-4, DO-160 CS"

  Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  CDN Test Levels (w/ built-in amplifier): 60Vrms

  BCI Test Levels (w/ built-in amplifier): 400mA/114 dBµA

  Frequency Range (w/ built-in amplifier): 9 kHz - 1 GHz

  VIEW PRODUCT Cart

• 

  Com-Power CLCI-100 Bulk Current Injection Probe for 10 KHz to 100 MHz

  SKU: sku-384

  Weight: 4.5 lbs. (2.04 Kg)

  Aperture: 1.575” (40 mm)

  Application/Test Type: Conducted and Radiated Susceptibility Testing

  Dimensions: Window Diameter: 1.575” (40 mm) Outside Diameter: 5.75” (146 mm) Width: 2.75” (70 mm)

  Frequency Range: 10 KHz to 100 MHz

  RF Connector: N-Type (female)

  Standards Met: EC 61000-4-6 and CISPR 16-1-2

  VIEW PRODUCT Cart

• 

  Noiseken ESS-B3011 & GT-30R Electrostatic Discharge Simulator System for up to 30kV Testing

  SKU: 345

  Weight: Generator : Approx. 4.8kg Discharge gun : Approx. 800g ( excluding cable and connector)

  Standards Met: IEC 61000-4-2, ISO 10605

  Air Discharge Voltage Range: 0.20kV30.0kV±5%（30.5kVmax）

  Battery: AC100V to AC240V ±10% 50Hz／60Hz 62VA

  Contact Discharge Voltage Range: 0.20kV30.0kV±5%（30.5kVmax）

  Polarity: positive/negative

  Pre-Programmed IEC Levels: Yes

  Resolution: Air discharge mode : 2.0kV, 4.0kV, 8.0kV and 15.0kV step Contact discharge mode : 2.0kV, 4.0kV, 6.0kV and 8.0kV step

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Teseq CBL 6112D Bilog Antenna, 30 MHz to 2 GHz, 300 Watts CW

  SKU: 10112

  Impedance: 50 Ohms

  Weight: approx. 4.2 kg (9.25 LB's)

  Antenna Factor (1 Meter): 7 to 27 dB/m

  Antennas: Bilogical Antennas

  Application/Test Type: VHF radio approval applications, Compliance Emission Testing

  Connector: N type female

  Dimensions: (L x H x W in mm): approx. 1530 X 1390 X 630

  Frequency Range: 30 MHz to 2 GHz

  Gain: 6 dB (200 MHz to 700 MHz), 8 dB (700 MHz to 2000 MHz)

  Impedance-2: 50 Ω

  Maximum Continuous Power: 300 Watts (80 MHz - 2 GHz)

  Standards Met: IEC/EN 61000-4-3, CISPR 13, CISPR 14-1, CISPR 16-1-4, CISPR 16-2-3, CISPR 22, CISPR 24, CISPR 32, EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, IEC 60533, IEC 60601-1-2, IEC 61326, ISO 11452-2

  VSWR: Average 2:1

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  PMM L3-32 Four Line 3-Phase LISN w/ V-Network, 32 Amps AC+DC

  SKU: 8784

  Application/Test Type: Measurement on AC 3-phase power circuits from DC to 60 Hz

  Current Rating: 32 Amps with IEC plug; 16 Amps with Schuko plug

  Frequency Range: 9 kHz to 30 MHz

  Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke

  Mains & EUT Connections: 32 A IEC connector; 16 A SCHUKO connector

  RF Connector: BNC (f)

  Standards Met: VDE 0876, CISPR 16-1-2, FCC Part 15

  Voltage Rating: 230 Volts AC and 325 Volts DC (Single Phase L-N, L-PE, N-PE and Three Phase L-PE and N-PE); 400 Volts AC and 565 Volts DC (Three Phase L-L, L-N)

  Additional Standards Met: DO-160F, CISPR 22, ANSI C63.4

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Haefely PEFT 8010 High Voltage EFT/Burst Generator, 7.3kV

  SKU: 22006

  Application/Test Type: Approval testing, Product development, Post design diagnostics, Industrial, Household

  Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

  Burst frequency: 1 Hz … 110 kHz (Duration 0.01 - 999 ms)

  Burst time: 0.1 Hz - 400 Hz; 2.5 ms - 10 s; 1 period - 500 periods

  Coupling: Built-in Single Phase AC 264 Volts / 16 Amps 50-60Hz, 10 Amps from 16 - 400 Hz; 125V/10A DC (Modes: L-GND, N-GND, PE-GND, LN-GND, LPEGND, NPE-GND, LNPE-GND)

  Pulse amplitude: 1.0 to 7.3kV (6.6 kV at CDN Output)

  Repetition time: Impulses per second: max. 250 for Unom over 4 kV; Impulses per burst: max. 500 for Unom 4 kV

  Standards Met: IEC/EN 61000-4-4 Ed. 1 + 2, IEC 61326, EN 61000-6-1, IEC 61850-3, EN 61000-6-2

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  DRHA6G-OB Dual Ridged Horn Antenna 3-6GHz for IEC 61000-4-3

  SKU: sku-2338

  VIEW PRODUCT Cart

• 

  Schwarzbeck NNBM 8124-400 Single Path Vehicle AMN (LISN)

  SKU: sku-1138

  Applications: Conducted Emissions, BCI Testing , Automotive EV EMC

  Test Standards: CISPR 25, MIL-STD-461, ISO 7637

  Max EUT DC Voltage: 1,000 Volts

  Max EUT Current: 400 Amps

  Max EUT AC Voltage (60Hz/400Hz): 400V/300V

  Inductance: 5 µH

  Inquire for Lead Time

  VIEW PRODUCT Cart

• 

  Amplifier Research AT 5000 E-Field Generator for Precompliance RFI Testing

  SKU: sku-766

  VIEW PRODUCT Cart

• 

  Pearson 8700i Bulk Current Injection Probe for MIL-STD-461 CS114, CS115, CS116

  SKU: 10532

  Test Standards: MIL-461 CS114, MIL-461 CS115

  Additional Test Standard: MIL-461 CS116

  Hole Diameter: 2 inches

  Max. Input Power: 100 W (for 1 hour)

  Frequency Range: 10 kHz to 400 MHz

  Inquire for Availability

  VIEW PRODUCT

• 

  EM Test EFT 500N5.8 Burst Generator up to 4.8kV, w/ Built in 3-Phase Coupler, IEC 61000-4-4

  SKU: sku-293

  Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

  VIEW PRODUCT Cart