EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  IFI EFG-3 E-Field Generating Antenna 1000 Watts

  Test Standards: MIL-STD-461 RS103, DO-160

  Built in Load: No

  Frequency Range: 10 kHz - 220 MHz

  Input Impedance: 50 ohms nominal

  Applications: Radiated Susceptibility

  Output Port Impedance: 50 ohms nominal

  Power Handling Capability: 1000 Watts CW

  CALL FOR LEAD TIME

  VIEW PRODUCT Cart

• 

  Teseq CDN S751A 75 Ohm BNC RF Coupler for IEC 61000-4-6 Testing

  SKU: sku-851

  Weight: 1.5 kg (3.3 lbs)

  Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω

  Current Rating: 1000 mA maximum

  Decoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)

  Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)

  Frequency Range: 150 kHz to 230 MHz

  Mains & EUT Connections: BNC 75 Ω

  RF Connector: BNC 75 Ω

  RF Input Voltage: 20 Volts Max

  Standards Met: IEC 61000-4-6

  Voltage Division Factor: 10 dB ±1 dB to 80 MHz, 10 dB +3, -2 dB from 80 MHz to 230 MHz

  Voltage Rating: AC max. voltage (line to ground): 250V; DC max. voltage (line to ground): 400 V; Test voltage: 200 V - 750 V DC, 2 sec (refer to data sheet for exact model specifications)

  Cost New:

  Was:

  Price Now:

  $1,245.00

• 

  Com-Power LI-3P-200 Series 3-Phase LISN's with 50/250 uH Inductor, FCC/EN/CISPR, up to 100 A, 150 kHz - 30 MHz

  SKU: sku-603

  Weight: 27.5 lbs.

  Application/Test Type: Power Line Conducted Emissions Tests

  Current Rating: up to 100 Amperes

  Dimensions: 19.3” x 13.9” x 2.3"

  Frequency Range: 9 kHz to 30 MHz

  Inductors: 50 µH or 250 µH

  Insertion loss: less than 0.7 dB

  Isolation: more than 40 dB

  Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

  RF Connector: RF Measurement Port 50Ω - N-Type (female)

  Standards Met: ANSI C63.4, CISPR 16-1-2

  Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

  VIEW PRODUCT Cart

• 

  EM Test PFM 200N100.1 Automotive Power Fail Simulator for Power Supply and Data Lines

  SKU: 10479

  Test Standards: LV 124/LV 148, LV 123

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Teseq NSG 3060-ITU Transient Generator for Surge, Telecom, EFT/Burst, IEC and ITU-T.K

  SKU: 10406

  Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations

  Standards Met: IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11, IEC/EN 61000-4-29

  Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  Max EUT AC Voltage (w/ Built in CDN): 264 Volts

  Max EUT AC Current (w/ Built in CDN): 16 Amps

  Max EUT DC Voltage (w/ Built in CDN): 220 Volts

  Max EUT DC Current (w/ Built in CDN): 10 Amps

  Peak inrush current capability: 500 A (at 230 V)

  EFT/Burst Pulse Output Capability: ±200 V to 4.8 kV (in 1 V steps) - open circuit±100 V to 2.4 kV ±100 A to 2.2 kA

  Combination/Wave Surge Output Capability: ±200 V to 4.4 kV (in 1 V steps)

  Phase synchronization: asynchronous, synchronous 0 to 359º (in 1º steps)

  Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Rent Noiseken CA-805B Coupling Adapter for Noise Injection

  SKU: 30079

  Weight: Approx. 3 kgs

  Dimensions: (W)350 x (H) 120x (D)130 mm

  Input Voltage: 400 V Max.

  Clamp Interim: 26 mm

  Coupling Ratio: 1:1

  Applications: Conducted Emissions, Radiated Emissions

  Typically in Stock

  VIEW PRODUCT Cart

• 

  Agilent E7402A EMI Analyzer w/ Built In Limits for FCC, IEC, EN's Emissions Standards

  SKU: 10288

  Frequency range (dc coupled): 100 Hz - 3.0 GHz

  Applications: EMC Precompliance Testing, Conducted Emissions, Radiated Emissions

  In Stock

  VIEW PRODUCT Cart

• 

  Teseq ISN T2A Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

  SKU: sku-158

  Frequency Range: 150 kHz to 80 MHz

  RF Input Voltage: 15 V

  Cost New:

  Was:

  $2,130.00

  Price Now:

  $1,597.50

• 

  Teseq ProfLine 2145-208 Harmonics & Flicker Measuring System

  SKU: 11156

  Phase synchronization: 3

  Voltage Rating: 45 kv

  Dual Range VAC: 150 V and 300 V

  Dual Range VDC: 200 V and 400 V

  Weight: 522 kg

  Frequency Range: 16 Hz – 819 Hz

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Teseq CBL 6144 Ultra-broadband BiLog Antenna for Compact Chambers

  SKU: 10118

  Impedance: 50 Ohms

  Weight: approx. 6.5 kg

  Antenna Factor (1 Meter): 4 to 3 dB/m

  Antennas: Bilogical Antennas

  Application/Test Type: Ultra-broadband immunity antenna For compact chambers Reduced chamber coupling

  Connector: N type female

  Dimensions: (L x H x W in mm): approx. 1585 X 1570 X 670

  Frequency Range: 26 MHz to 3 GHz (useable to 20 MHz)

  Gain: 6 dB (200 MHz to 3 GHz) / 8 dB (700 MHz to 2.5 GHz)

  Impedance-2: 50 Ω

  Maximum Continuous Power: 600 Watts

  Standards Met: IEC/EN 61000-4-3,CISPR 13,CISPR 14-1,CISPR 16-1-4,CISPR 16-2-3,CISPR 22,CISPR 24,CISPR 32,EN 61000-6-1,EN 61000-6-2,EN 61000-6-3,EN 61000-6-4,IEC 60533,IEC 60601-1-2,IEC 61326,ISO 11452-2

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Teseq NSG 4070B Conducted & Radiated Immunity Test System

  SKU: 11159

  1 review

  Test Capabilities: RF Conducted Immunity

  Standards Met: IEC/EN 61000-4-6

  Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  CDN Test Levels (w/ built-in amplifier): None

  BCI Test Levels (w/ built-in amplifier): None

  Frequency Range (w/ built-in amplifier): 4 kHz - 1 GHz

  Videos: Calibration Example, Remote Operation Setup

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Com-Power LI-3P-132 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network

  SKU: sku-598

  Weight: 30 lbs.

  Application/Test Type: Power Line Conducted Emissions Tests

  Current Rating: 32 Amperes

  Frequency Range: 150 kHz to 30 MHz

  Inductors: 50 µH

  Insertion loss: less than 0.7 dB

  Isolation: more than 40 dB

  Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

  RF Connector: RF Measurement Port 50Ω - N-Type (female)

  Standards Met: ANSI C63.4, CISPR 16-1-2

  Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

  Cost New:

  Was:

  Price Now:

  $6,495.00

  ORDERING OPTIONS