EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  Schwarzbeck FSH3D Isotropic 3-Axial RX Loop Antenna

  SKU: FSH3D

  Frequency Range: 9 kHz - 200 MHz (nominal)

  Connector: N-female 50 Ω

  Power Supply: 5 V DC < 100 mA

  Power Supply and Logical Connector: Binder 99-0421-10-07 Serie 712

  VSWR: typ. < 1.5 (20 kHz - 50 MHz)

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Teseq ISN S502A Impedance Stabilization Network for Coaxial Lines

  SKU: sku-172

  Weight: approx. 1.5 kg

  Dimensions: (W x H x D): 100 mm x 100 mm x 240 mm

  Frequency Range: 150 kHz to 230 MHz

  Impedance: 150 Ω ±20 Ω

  RF Input Voltage: 20 V

  VIEW PRODUCT Cart

• 

  Schwarzbeck NTFM 8158 8-Wire Impedance Stabilization Network

  SKU: sku-1272

  Typically In Stock

  VIEW PRODUCT Cart

• 

  FTC-10 - 10µF Microfarad Feed-Thru Capacitor

  SKU: 30091

  Capacitance: 10 µF (Microfarad)

  Tolerance: ±10%

  Temperature: -55°C to +70°C @ rated voltage +105°C @ 50% of rated voltage

  Dissipation Factor: Less than 1% at 25°C (Measured at 120 Hz)

  Dielectric Strength: Twice the rated VDC @ 25°C for two minutes

  Inquire for Lead Time

  VIEW PRODUCT Cart

• 

  Solar 2714-106R High Power Feed-Thru Capacitor

  SKU: 6982

  Applications: Military & Aerospace EMC Testing

  Test Standards: ±10%

  Max Voltage: 1200 VDC, 275 Volts @ 400 Hz, 500 Volts @ 60 Hz

  Max Current: 500 Amps

  Tolerance: ±10%

  Dielectric Strength: Twice the rated VDC @ 25°C for two minutes

  Standards Met: SAE ARP-936 Insertion Loss Limits, Measured per MIL-STD-220C

  Cost New:

  Was:

  Price Now:

  $295.00 - $4,795.00

  IN STOCK

  ORDERING OPTIONS

• 

  CISPR 25 ALSE Test Chamber Build & Install

  SKU: 11326

  Frequency Range: DC - 40 GHz

  Isolation: 100-110 dB typical (75 dB min in the Magnetic Field)

  1-6 Months

  VIEW PRODUCT Cart

• 

  DRHA2G Double Ridged Horn Antenna

  SKU: sku-363-1

  Weight: 29.5 lbs. [13.4 kg]

  Applications: EMC Precompliance Testing, Radiated Emissions, RF Immunity Testing

  Antenna Factor: 10 to 27 dB/m

  Dimensions: 27.2” x 37.2” x 37” [69 x 94.5 x 94 cm]

  Frequency Range: 200 MHz to 2 GHz

  Gain: 11.5 dBi

  Typically In Stock

  VIEW PRODUCT Cart

• 

  LISN-MIL461-100A Line Impedance Stabilization Network

  SKU: sku-2368

  Test Standard: MIL-STD 461F

  In Stock

  VIEW PRODUCT Cart

• 

  LISN-MIL461A-100 Appendix A in MILSTD 461 Line Impedance Stabilization Network

  SKU: sku-2216

  VIEW PRODUCT

• 

  Solar Solid State Amplifier 6552-1A 10 Hz - 100 kHz, 100 Watts for MIL-STD-461A/462

  SKU: 4621

  Input Impedance: 500 - 600 ohms

  Output Power: 100 watts at 1 KHz into 2.4 ohms

  Output Impedance: 2.4 ohms

  Output Voltage: 16 volts r.m.s. at 1000 Hz into 2.4 ohms (non-inductive)

  VIEW PRODUCT Cart

• 

  AMA60M100H Low Frequency Active Monopole 100 Hz - 60 MHz for MIL-STD, FCC, VDE and TEMPEST Testing

  SKU: 8658

  Antenna Factor (1 Meter): 0 dB/m

  Application/Test Type: Active, general-purpose, receive-only antenna for FCC, MIL-STD-461, and TEMPEST Testing

  Connector: BNC (female)

  Dimensions: Ground Plane Dimensions: 18 in. X 18 in. (45.7 cm x 45.7 cm) Optional 24" (60cm) is available Rod Length: 8.5 in. - 43 in. (21.6 cm x 109.2 cm)

  Frequency Range: 100 Hz to 60 MHz

  Impedance: 50 Ω

  Mounting Base: 1/4" 20 thread

  Standards Met: MIL-STD-461, VDE, FCC Part 15

  Cost New:

  Was:

  Price Now:

  $350.00 - $3,525.00

  In Stock

  ORDERING OPTIONS

• 

  RL200K Radiating Loop Sensor for MIL-STD-461D/RS101

  SKU: 12146

  Weight: Radiating Loop: 2 pounds (0.9 kg) Loop Sensor: .25 pounds (0.11 kg)

  # of turns: Radiating Loop: 20 Loop Sensor: 51

  Antennas: Loop Antennas

  Connector: Radiating Loop: Binding posts Loop Sensor: BNC

  Construction: Radiating Loop: Wire: 12 AWG, Loop Sensor: Wire: 30 AWG, Shielding: Electrostatic

  Dimensions: Radiating Loop: 4.72" diameter (12 cm) Loop Sensor: 1.574" diameter (4.0 cm)

  General Data: Technical Details

  VIEW PRODUCT Cart