EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  Rigol EMI Precompliance Test Equipment Bundle

  SKU: 11165

  Applications: EMC Precompliance Testing, Conducted Emissions, Radiated Emissions

  Limit Lines: CISPR 11, MIL-STD-461, FCC Part 15 and more

  Bundle Includes: DSA710, EMI-DSA800, NFP-3, S1210 EMIs, interconnect cables

  Frequency Range: 100 kHz to 1 GHz

  Cost New:

  Was:

  Price Now:

  $259.00 - $1,295.00

  Typically In Stock

  ORDERING OPTIONS

• 

  Radiated Emissions Testing Equipment for FCC, MIL and More

  SKU: sku-1164

  Generic Standards: IEC 61000-6-3, IEC 61000-6-4

  VIEW PRODUCT Cart

• 

  Rohde & Schwarz Precompliance EMI Emissions Test Equipment Package

  SKU: sku-1125

  Applications: EMC Precompliance Testing, Conducted Emissions, Radiated Emissions

  Limit Lines: CISPR 11, MIL-STD-461, FCC Part 15 and more

  In stock

  VIEW PRODUCT Cart

• 

  3ctest CWS X00G/SPN 38XXT Combination Wave Surge Simulator CWS

  SKU: sku-1094

  VIEW PRODUCT Cart

• 

  3ctest EFT 500G / EFTN 15100T High Voltage High-Power Intelligent EFT/Burst

  SKU: sku-1092

  VIEW PRODUCT Cart

• 

  EM Test CNV 504 Coupling/Decoupling Network

  SKU: 30017

  Test Standards: IEC 61000-4-5

  Applications: Data lines Unshielded, Symmetrical Surge Immunity

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  IFI EFG-3 E-Field Generating Antenna 1000 Watts

  Test Standards: MIL-STD-461 RS103, DO-160

  Built in Load: No

  Frequency Range: 10 kHz - 220 MHz

  Input Impedance: 50 ohms nominal

  Applications: Radiated Susceptibility

  Output Port Impedance: 50 ohms nominal

  Power Handling Capability: 1000 Watts CW

  CALL FOR LEAD TIME

  VIEW PRODUCT Cart

• 

  Teseq CDN S751A 75 Ohm BNC RF Coupler for IEC 61000-4-6 Testing

  SKU: sku-851

  Weight: 1.5 kg (3.3 lbs)

  Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω

  Current Rating: 1000 mA maximum

  Decoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)

  Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)

  Frequency Range: 150 kHz to 230 MHz

  Mains & EUT Connections: BNC 75 Ω

  RF Connector: BNC 75 Ω

  RF Input Voltage: 20 Volts Max

  Standards Met: IEC 61000-4-6

  Voltage Division Factor: 10 dB ±1 dB to 80 MHz, 10 dB +3, -2 dB from 80 MHz to 230 MHz

  Voltage Rating: AC max. voltage (line to ground): 250V; DC max. voltage (line to ground): 400 V; Test voltage: 200 V - 750 V DC, 2 sec (refer to data sheet for exact model specifications)

  Cost New:

  Was:

  Price Now:

  $1,245.00

• 

  Com-Power LI-3P-200 Series 3-Phase LISN's with 50/250 uH Inductor, FCC/EN/CISPR, up to 100 A, 150 kHz - 30 MHz

  SKU: sku-603

  Weight: 27.5 lbs.

  Application/Test Type: Power Line Conducted Emissions Tests

  Current Rating: up to 100 Amperes

  Dimensions: 19.3” x 13.9” x 2.3"

  Frequency Range: 9 kHz to 30 MHz

  Inductors: 50 µH or 250 µH

  Insertion loss: less than 0.7 dB

  Isolation: more than 40 dB

  Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

  RF Connector: RF Measurement Port 50Ω - N-Type (female)

  Standards Met: ANSI C63.4, CISPR 16-1-2

  Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

  VIEW PRODUCT Cart

• 

  Teseq NSG 3060-ITU Transient Generator for Surge, Telecom, EFT/Burst, IEC and ITU-T.K

  SKU: 10406

  Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations

  Standards Met: IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11, IEC/EN 61000-4-29

  Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  Max EUT AC Voltage (w/ Built in CDN): 264 Volts

  Max EUT AC Current (w/ Built in CDN): 16 Amps

  Max EUT DC Voltage (w/ Built in CDN): 220 Volts

  Max EUT DC Current (w/ Built in CDN): 10 Amps

  Peak inrush current capability: 500 A (at 230 V)

  EFT/Burst Pulse Output Capability: ±200 V to 4.8 kV (in 1 V steps) - open circuit±100 V to 2.4 kV ±100 A to 2.2 kA

  Combination/Wave Surge Output Capability: ±200 V to 4.4 kV (in 1 V steps)

  Phase synchronization: asynchronous, synchronous 0 to 359º (in 1º steps)

  Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Rent Noiseken CA-805B Coupling Adapter for Noise Injection

  SKU: 30079

  Weight: Approx. 3 kgs

  Dimensions: (W)350 x (H) 120x (D)130 mm

  Input Voltage: 400 V Max.

  Clamp Interim: 26 mm

  Coupling Ratio: 1:1

  Applications: Conducted Emissions, Radiated Emissions

  Typically in Stock

  VIEW PRODUCT Cart

• 

  Agilent E7402A EMI Analyzer w/ Built In Limits for FCC, IEC, EN's Emissions Standards

  SKU: 10288

  Frequency range (dc coupled): 100 Hz - 3.0 GHz

  Applications: EMC Precompliance Testing, Conducted Emissions, Radiated Emissions

  In Stock

  VIEW PRODUCT Cart