EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  Fischer FCC F-120-9 Bulk Current Injection Probe

  SKU: 3729

  Frequency Range: 10 kHz – 230 MHz

  Input Power Rating: 100 Watts

  Inner Diameter: 40 mm

  Outer Diameter: 127 mm

  BCI Test Standards: ISO 11452-4, IEC 61000-4-6 BCI, DO-160 Section 20, MIL-STD-461 CS114

  Applications: Bulk Current Injection Testing

  Cost New:

  Was:

  Price Now:

  $295.00

  In Stock

  ORDERING OPTIONS

• 

  EMC Partner CDN-KIT1000 ED3

  SKU: 35425

  Standard: IEC 61000-4-5

  Application: surge on 2 unsymmetrical lines

  Test level surge: max. 6 kV

  EUT voltage per line: max. 200 V DC or 240 V peak

  EUT current per line: max. 4 A cont. or 5 A for 5 min.

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Com-Power LI-350 Line Impedance Stabilization Network

  SKU: 10425

  Weight: 6 lbs. / 2.7 kg

  Application/Test Type: Power line conducted emissions tests

  Current Rating: 50 Ampere AC, 35 Ampere DC

  Dimensions: 15.4 x 7 x 6.6 inches / 39.1 x 17.7 x 16.7 cm

  Frequency Range: 10 kHz to 400 MHz

  Inductors: 5 µH (air-core)

  Insertion Loss: 0.2 dB (150 kHz to 30 MHz)

  Mains & EUT Connections: Superior Electric SUPERCON® shrouded sockets

  RF Connector: 50Ω N-type (female)

  Standards Met: RTCA DO-160 / MIL-STD 461F

  Voltage Rating: 480 VAC (Line to Ground), 676 VDC

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Schwarzbeck VULB 9161 SE TRILOG Broadband Antenna

  SKU: 11821

  Frequency Range: 30 MHz - 2 GHz

  Max Power: 1 kW

  Polarization: linear

  Connector: N - Type

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Haefely PCD 130 3 Phase Coupling/Decoupling Network for PSURGE 8000

  SKU: sku-444

  Weight: 69 kg (net weight)

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Coupling: 3 Phase - 32 Amps, 690 VAC

  Dimensions: 45 x 50 x 57 cm (W x H x D)

  General Data: Technical Details

  Phase synchronization: 1° steps

  Polarity: pos / neg

  Pulse current (short circuit): 32A RMS

  Pulse voltage (open circuit): 690V RMS (Phase-Phase) 110V DC

  Standards Met: IEC 61000-4-5 Ed. 1 & 2 and ANSI C62.41 and C62.45

  In Stock

  VIEW PRODUCT Cart

• 

  EM Test OCS 500N6F Simulator for Fast/Slow Damped Oscillatory Waves and Ringwave

  SKU: 10413

  Burst duration: 50 ms ±20%, at 3 MHz 15 ms ±20%, at 10 MHz 5 ms ±20%, at 30 MHz

  Damping Rate: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 value

  Oscillation Frequency: 3 MHz, 10 MHz and 30 MHz, ±10%

  Source Impedance: 50 ohm ±20%

  Voltage: Voltage (o.c.) at HV output 450 V - 4,400 V ±10%

  Burst Duration: At least 2s

  Damping Rate-2: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 value

  Fast Damped Oscillatory Waves: As Per EN/IEC 61000-4-18

  Frequency: 100 kHz ± 10%

  General Data: Technical Details

  Impedance: 12ohm and 30ohm ± 20%

  Oscillation Frequency-2: 100kHz and 1MHz ± 10%

  Peak current: Max. 500A @ 12ohm or Max. 200A @ 30ohm internally;

  Polarity-2: Positive, negative

  Pulse repetition: 1 to 60 transients per minute

  Repetition Rate: Max. 5,000 /s ±10%

  Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

  Source impedance: 200ohm ± 20%

  Spike frequency: 100kHz ± 10%

  Test Voltage: 250 V - 6,000 V ± 10%

  Equipment Group: Ring Wave Generators/Simulators

  Inquire

  VIEW PRODUCT Cart

• 

  3ctest SG 5010H 10kV Surge Simulator for IEC 61000-4-5, GB/T, ITU-T K21/K44

  SKU: sku-326

  Polarity: +/-, positive first or negative first

  Weight: Approximately 300 kg

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Coupling: 1 or 3 Phase 16 Amps 250V/450V

  Impedance: 500Ω±10％

  Input voltage UIN: AC220V±10%，50/60H

  Output Current: 10/700 and 5/320±20%μs

  Polarity-2: +/-, positive first or alternate

  Pulse current (short circuit): 150A - 3kA/5kA (±10%)

  Pulse voltage (open circuit): 300V - 6kV/10kV (±10%)

  Standards Met: EN/IEC 61000-4-5, IEC 61643-1, GB/T 17626.5m GB/T 16927.1, ITU-T K21 and ITU-T K44

  Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations

  Test duration: Voltage - 50μs(±20%); Current - 20μs(±20%)

  Test Voltage: 300V～6Kv/10kV （±10%)

  Transfer Impedance: 15Ω、40Ω（25+15Ω

  VIEW PRODUCT Cart

• 

  Teseq ISN S752 Impedance Stabilization Network for Coaxial Lines

  SKU: sku-174

  Weight: approx. 1.5 kg

  Dimensions: (W x H x D): 100 mm x 100 mm x 240 mm

  Frequency Range: 150 kHz to 230 MHz

  Impedance: 150 Ω ±20 Ω

  RF Input Voltage: 20 V

  VIEW PRODUCT Cart

• 

  QRHA4G-OB Dual Polarized Quad Ridged Open Boundary Antenna

  SKU: 12343

  Frequency Range: 1 - 4 GHz

  Isotropic Gain: 8 dBi

  Port Isolation: 20 dB

  Applications: Antenna Pattern Measurements, Emissions

  Cost New:

  Was:

  Price Now:

  $4,650.00

  Inquire for Availability

• 

  ETS-Lindgren (EMCO) 3107B E-Field Generating Antenna

  SKU: 2187

  Applications: Radiated Susceptibility

  Dimensions: 72.5" x 24" x 2.0" (L x W x H)

  Frequency Range: 10 kHz - 30 MHz

  Built in Load: No

  Max. Radiated Field Strength: 100 V/m

  Max. Power Capability: 1000 W

  Connector: N-Type

  1 Unit Left

  VIEW PRODUCT Cart

• 

  Teseq ITS 6006 Radiated Immunity Test System

  SKU: 11290

  Frequency Range: 80 MHz to 6 GHz

  Input: External AM input: BNC socket, impedance more than 10 kΩ External PM input: BNC socket, TTL

  Output: Generator outputs: 4x N sockets 50 Ω, 80 MHz to 6 GHz Interlock outputs: 4x BNC sockets External PM output: BNC socket, TTL, impedance more than 1.2 kΩ 10 MHz reference output: BNC socket, approx. 0 dBm/50 Ω

  Reference frequency: 10 MHz

  Applications: RF/Radiated Immunity & Susceptibility Testing

  Test Standards: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20

  Cost New:

  Was:

  Price Now:

  $1,975.00 - $18,000.00

  In Stock

  ORDERING OPTIONS

• 

  Rent Com-Power ISN-T8 for One, Two, Four, Unshielded Balanced Pair, CAT-3, CAT-5

  SKU: 30150

  Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]

  Current Rating: 800 mA (per line), 1.6 Amps (per pair)

  Dimensions: see photo in images

  Frequency Range: 150 kHz to 30 MHz

  Isolation: 150 kHz to 1.5 MHz: 35 to 55 dB 1.5 MHz to 30 MHz: 55 dB

  Mains & EUT Connections: D-sub 25 pin female connectors

  RF Connector: 50Ω N-type (female)

  Standards Met: CISPR 16-1-2, CISPR 22

  Voltage Rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)

  Cost New:

  Was:

  Price Now:

  $410.00 - $4,100.00

  Typically in Stock

  ORDERING OPTIONS