Inquire for Availability
EMC Test Equipment Categories
EMC Test Equipment Test Equipment, Systems & Solutions
-
-
Teseq NSG 5500-2 Automotive Immunity Expandable Test System up to Five Transient Modules
SKU: sku-160
Applications: Automotive Electrical Disturbances, EV EMC TestingStandards Met: ISO 7637Max EUT DC Voltage (w/ Built In CDN): 60 VoltsMax EUT DC Current (w/ Built In CDN): 30 AmpsPeak Inrush Current Capability: 300 AmpsPre-Programmed Pulses: ISO 7637-2 (Pulse 1, 2a,3a/3b 6),SAE J1113, GM 3097, BMW, Volkswagen, PSA, Chrysler, DC 10614, Renault, FIAT, Mitsubishi, Honda, Ford ES-XW7T -
Frankonia CIT-10 RF Conducted Immunity Test System
SKU: 6886
Test Capabilities: RF Conducted ImmunityCDN Test Levels (w/ built-in amplifier): 30VrmsBCI Test Levels (w/ built-in amplifier): 200mAStandards Met: IEC/EN 61000-4-6, MIL-461 CS114, ISO 11452-4Applications: Bulk Current Injection Testing, RF Conducted Immunity$16,500.00In Stock -
AH Systems AK-18G Antenna Kit for FCC, MIL-STD, VDE and TEMPEST Testing up to 18 GHz
SKU: 7149
Applications: Radiated Immunity, Radiated EmissionsStandards Met: FCC, MIL-STD-461, VDE, TEMPEST TestingAntenna Case Dimensions: 28" x 23" x 10"Tripod Case Dimensions: 46" x 8" DiameterInquire for Availability -
Fischer FCC F-120-9 Bulk Current Injection Probe
SKU: 3729
Frequency Range: 10 kHz – 230 MHzInput Power Rating: 100 WattsInner Diameter: 40 mmOuter Diameter: 127 mmBCI Test Standards: ISO 11452-4, IEC 61000-4-6 BCI, DO-160 Section 20, MIL-STD-461 CS114Applications: Bulk Current Injection Testing$295.00In Stock -
EMC Partner CDN-KIT1000 ED3
SKU: 35425
Standard: IEC 61000-4-5Application: surge on 2 unsymmetrical linesTest level surge: max. 6 kVEUT voltage per line: max. 200 V DC or 240 V peakEUT current per line: max. 4 A cont. or 5 A for 5 min.Typically In Stock -
Com-Power LI-350 Line Impedance Stabilization Network
SKU: 10425
Weight: 6 lbs. / 2.7 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 50 Ampere AC, 35 Ampere DCDimensions: 15.4 x 7 x 6.6 inches / 39.1 x 17.7 x 16.7 cmFrequency Range: 10 kHz to 400 MHzInductors: 5 µH (air-core)Insertion Loss: 0.2 dB (150 kHz to 30 MHz)Mains & EUT Connections: Superior Electric SUPERCON® shrouded socketsRF Connector: 50Ω N-type (female)Standards Met: RTCA DO-160 / MIL-STD 461FVoltage Rating: 480 VAC (Line to Ground), 676 VDCInquire for Availability -
Schwarzbeck VULB 9161 SE TRILOG Broadband Antenna
SKU: 11821
Frequency Range: 30 MHz - 2 GHzMax Power: 1 kWPolarization: linearConnector: N - TypeInquire for Availability -
Haefely PCD 130 3 Phase Coupling/Decoupling Network for PSURGE 8000
SKU: sku-444
Weight: 69 kg (net weight)Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Coupling: 3 Phase - 32 Amps, 690 VACDimensions: 45 x 50 x 57 cm (W x H x D)General Data: Technical DetailsPhase synchronization: 1° stepsPolarity: pos / negPulse current (short circuit): 32A RMSPulse voltage (open circuit): 690V RMS (Phase-Phase) 110V DCStandards Met: IEC 61000-4-5 Ed. 1 & 2 and ANSI C62.41 and C62.45In Stock -
EM Test OCS 500N6F Simulator for Fast/Slow Damped Oscillatory Waves and Ringwave
SKU: 10413
Burst duration: 50 ms ±20%, at 3 MHz 15 ms ±20%, at 10 MHz 5 ms ±20%, at 30 MHzDamping Rate: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 valueOscillation Frequency: 3 MHz, 10 MHz and 30 MHz, ±10%Source Impedance: 50 ohm ±20%Voltage: Voltage (o.c.) at HV output 450 V - 4,400 V ±10%Burst Duration: At least 2sDamping Rate-2: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 valueFast Damped Oscillatory Waves: As Per EN/IEC 61000-4-18Frequency: 100 kHz ± 10%General Data: Technical DetailsImpedance: 12ohm and 30ohm ± 20%Oscillation Frequency-2: 100kHz and 1MHz ± 10%Peak current: Max. 500A @ 12ohm or Max. 200A @ 30ohm internally;Polarity-2: Positive, negativePulse repetition: 1 to 60 transients per minuteRepetition Rate: Max. 5,000 /s ±10%Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41Source impedance: 200ohm ± 20%Spike frequency: 100kHz ± 10%Test Voltage: 250 V - 6,000 V ± 10%Equipment Group: Ring Wave Generators/SimulatorsInquire -
3ctest SG 5010H 10kV Surge Simulator for IEC 61000-4-5, GB/T, ITU-T K21/K44
SKU: sku-326
Polarity: +/-, positive first or negative firstWeight: Approximately 300 kgCombination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Coupling: 1 or 3 Phase 16 Amps 250V/450VImpedance: 500Ω±10%Input voltage UIN: AC220V±10%,50/60HOutput Current: 10/700 and 5/320±20%μsPolarity-2: +/-, positive first or alternatePulse current (short circuit): 150A - 3kA/5kA (±10%)Pulse voltage (open circuit): 300V - 6kV/10kV (±10%)Standards Met: EN/IEC 61000-4-5, IEC 61643-1, GB/T 17626.5m GB/T 16927.1, ITU-T K21 and ITU-T K44Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendationsTest duration: Voltage - 50μs(±20%); Current - 20μs(±20%)Test Voltage: 300V~6Kv/10kV (±10%)Transfer Impedance: 15Ω、40Ω(25+15Ω -
Teseq ISN S752 Impedance Stabilization Network for Coaxial Lines
SKU: sku-174
Weight: approx. 1.5 kgDimensions: (W x H x D): 100 mm x 100 mm x 240 mmFrequency Range: 150 kHz to 230 MHzImpedance: 150 Ω ±20 ΩRF Input Voltage: 20 V