EMC/EMI Test & Measurement Equipment - The EMC Shop

EMC Test Equipment Categories

Transient Generators

EMI Receivers/EMC Analyzers

RF Power Amplifiers

Electric Field Strength Measurement

RF Conducted Immunity Test Systems

EMC Antennas

Line Impedance Stabilization Networks (LISN's)

EMC Probes

EM Coupling Clamps

Coupling Decoupling Networks (CDN's)

RF Current Probes/Monitors

EMC/EMI Signal Generators

Calibration Equipment

Software for EMC Testing

EMC Test Equipment Test Equipment, Systems & Solutions

Schwarzbeck HFRA 5149 H-Field Transmit Loop VLF / HF

SKU: 30111

Frequency Range: 9 kHz – 30 MHz

SWR: < 2 (0.02 – 20 MHz)

Connectors: N-Type (f)

External Termination: 50 Ω

Directive Pattern: 2 x 90° half power vertical axis

Applications: Antenna Pattern Measurement

Typically in Stock

VIEW PRODUCT Cart
Schwarzbeck NFPA 9730 Power Amplifier DC - 250 kHz

SKU: 30020

Frequency Range: DC to 250 kHz

Gain at 8 Ω impedance: 28 Arms

Continuous Operating Current (AC): 0.25 Ω @ AC>15 Hz

DC Max. Current Output: 20 A (Load impedance 1.0 Ω min.)

Input Resistance (typical): 1 kΩ

Input Connector: BNC

Output Connector: Wing terminals

Applications: Radiated Immunity

Inquire for Availability

VIEW PRODUCT Cart
Haefely FP-COMB 32 Automatic 3-Phase Coupler for AXOS System

SKU: sku-786

Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

Pulse amplitude: 5 kV

Voltage: 7 kV

Compatible Impulse Generators: Haefely AXOS5, Haefely AXOS8

Typically in Stock

VIEW PRODUCT Cart
Com-Power ISN-T8 Impedance Stabilization Network 150 kHz to 30 MHz

SKU: 30151

Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]

Current Rating: 800 mA (per line), 1.6 Amps (per pair)

Dimensions: see photo in images

Frequency Range: 150 kHz to 30 MHz

Isolation: 150 kHz to 1.5 MHz: 35 to 55 dB 1.5 MHz to 30 MHz: 55 dB

Mains & EUT Connections: D-sub 25 pin female connectors

RF Connector: 50Ω N-type (female)

Standards Met: CISPR 16-1-2, CISPR 22

Voltage Rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)

Cost New:

Was:

Price Now:

$410.00 - $4,100.00

Typically in Stock

ORDERING OPTIONS
EM Test UCS500N7 Multifunctional Transient Immunity Simulator

SKU: sku-241

Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations

EMC Standards: IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11

Test Setup Guides: Electrical Transient and Noise, Surge Immunity, Power Failures

EFT/Burst Pulse Output Capability: ±200 V to 4.8 kV (in 1 V steps) - open circuit±100 V to 2.4 kV ±100 A to 2.2 kA

Combination/Wave Surge Output Capability: 250 V - 6,000 V ± 10%

External Coupling: Data Lines (EFT & Surge), 3PH EUT

Phase synchronization: 0° - 360°, resolution 1° (16 - 500Hz)

Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations

Inquire for Availability

VIEW PRODUCT Cart
Tomco RF Amplifier BT01000-AlphaS .1 MHz - 30MHz

SKU: sku-2308

Max Frequency: 30 MHz

Min Frequency: 100 kHz

Output Power: 800 Watts Pulse

Applications: Particle, Plasma, Magnetic, Radar, NMR, MRI, EPR, ESR,ENDOR and NQR

AC Input Power: 110-240V/1PH/1kVA

Gain: 60dB

VIEW PRODUCT Cart
SteppIR SYS3-EMC E-Field Generator 20 MHz - 300 MHz, 200 V/m

SKU: sku-2122

Connector: N-Type, female

Frequency Range: 20 MHz to 330 MHz

Impedance: 50 ohm

Max Radiated Field Strength: 200 V/m

Standards Met: MIL 461

VIEW PRODUCT Cart
Teseq CDN 3425 Burst/EFT Coupling Clamp

SKU: sku-1065

Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)

Compatible Impulse Generators: Any EFT/Burst Generators (custom HV cable may be required)

Standards Met: IEC / EN 61000-4-4

Inquire for Availability

VIEW PRODUCT Cart
Amplifier Research (AR) FL7006 Electric Field Probe Kit, 100 kHz - 6 GHz

SKU: 57543

Application/Test Type: Monitoring Electric Field Strengths

Field Strength Range: 0.5 to 800 V/m (0.01 V/m)

Frequency Range: 100 kHz to 6 GHz

Standards Met: IEC/EN 61000-4-3

Interfaces: USB, IEEE-488 (GPIB), RS-232 (serial), Fiber-Optic Serial

Battery Life: 60-80 hours

Typically In Stock

VIEW PRODUCT Cart
Fischer Custom Communications FCC F-120-1 Bulk Current Injection Probe

SKU: 11268

Aperture: 40 mm (1.57 inches)

Insertion Loss: Less than 16dB / 5MHz - 80MHz

Maximum Continuous Power: 100 Watts (for 30 minutes)

RF Connector: N-type (f)

Fre: 10 kHz - 175 MHz

Standards Met: IEC 61000-4-6

Applications: Bulk Current Injection BCI Testing, RF Conducted Immunity Testing

Cost New:

Was:

Price Now:

$295.00 - $3,950.00

In Stock

ORDERING OPTIONS
Fischer FCC-TLISN-T4-02 CISPR 22 Impedance Stabilization Network (ISN)

SKU: 484

Application/Test Type: Measuring conducted emissions on two balanced pair telecom ITE’s.

Common Mode Impedance: 150 ± 20Ω

Current Rating: 250 mA Maximum

Decoupling of Common Mode Disturbance: 35 dB min. to 150 kHz; 55 dB min up to 30 MHz

Frequency Range: 150 kHz to 30 MHz

Mains & EUT Connections: D-sub 25 female

RF Connector: 50Ω BNC female

Voltage Division Factor: 9.5 dB ±1 dB

Voltage Rating: 63 VAC RMS, 100 VDC

Test Standards: CISPR 22 (ISNs)

Cost New:

Was:

Price Now:

$395.00 - $2,750.00

In Stock

ORDERING OPTIONS
Teseq CDN 3083-Burst 1000 Volt, 100-200 Amp Coupler for EFT/Burst

SKU: sku-221

Weight: 11 kg (24 lbs)

Application/Test Type: EFT/Burst immunity testing of equipment requiring large currents, specially designed for heavy industry, smart grid and electro vehicle applications.

Current Rating: 100 Amp or 200 Amp continous depending on model

Compatible Impulse Generators: Any EFT/Burst Generators (custom HV cable may be required)

Mains & EUT Connections: SHV; Screw terminals, rated for 200 A

Standards Met: IEC / EN 61000-4-4 up to 8.8 kV

Voltage Rating: 690 V AC RMS; 1000 VDC

Cost New:

Was:

Price Now:

$395.00 - $495.00

In Stock

ORDERING OPTIONS