EMC/EMI Test & Measurement Equipment - The EMC Shop

EMC Test Equipment Categories

Transient Generators

EMI Receivers/EMC Analyzers

RF Power Amplifiers

Electric Field Strength Measurement

RF Conducted Immunity Test Systems

EMC Antennas

Line Impedance Stabilization Networks (LISN's)

EMC Probes

EM Coupling Clamps

Coupling Decoupling Networks (CDN's)

RF Current Probes/Monitors

EMC/EMI Signal Generators

Calibration Equipment

Software for EMC Testing

EMC Test Equipment Test Equipment, Systems & Solutions

Amplifier Research 50W1000B 1 MHz - 1 GHz RF Power Amplifier

SKU: 10922

Frequency Range: 1 MHz - 1 GHz

Output Power: 50 W

Flatness: ±1.0 dB typical, ±1.5 dB maximum

Gain: 47 dB minimum (at max setting)

Imput Impedance: 50 ohms, VSWR 2.0:1 maximum

Output Impedance: 50 ohms nominal

Cost New:

Was:

Price Now:

$695.00

In Stock

ORDERING OPTIONS
Fischer FCC F-120-6A BCI Injection Test Probe

SKU: 11811

Aperture: 40 mm

Connector type: Type-N

Test Standards: ISO 11452-4, IEC 61000-4-6 BCI, DO-160 Section 20, MIL-STD-461 CS114

Frequency Range: 10 kHz – 400 MHz

Input Power: 200 watts

Insertion loss: less than 7dB/700kHz - 200MHz

Rated Power: 100 CW

Applications: EMC BCI Tests, Military EMC Testing

Inquire for Availability

VIEW PRODUCT Cart
Thermo Keytek E510A 10kV Surge Generator

SKU: 10799

Standards Met: ANSI/IEEE C62.41 Cat. B and IEC 61000 4-5

Phase synchronization: ±15° with optional coupler/decoupler

Pulse current (short circuit): 8/20µs, 0-5.05kA with 2 ohm effective source impedance, ±10%

Pulse repetition: 1 shot/18 seconds

Pulse voltage (open circuit): 1.2/50µs, 0-10.1kV ±10% in 1 volt steps

Repetition time: Adjustable from 300ms to 5s; 1ms resolution

Typically In Stock

VIEW PRODUCT Cart
AH Systems TDS-535 Tuned Dipole Set, 25 MHz to 1 GHz, Receive and Transmit

SKU: 10742

Weight: 19 lbs.

Antennas: Dipole Antennas

Application/Test Type: precise EMI measurements

Connector: N-type (female)

Dimensions: Antenna Case: 28” x 23” x 7”

Frequency Range: 25 MHz - 1 GHz

Gain: Varies with Model

Impedance: 50 ohm

Inquire for Availability

VIEW PRODUCT Cart
Amplifier Research 50T4G18, 50 Watts CW, 4.2–18GHz, (TWT) Microwave Amplifier

SKU: sku-717

Weight: 70 lbs, 32 kg

Dimensions: 19.8 x 6.5 x 27 in., 50.3 x 16.5 x 68.6 cm.

Flatness: ±10 dB maximum, 4.2 - 18 GHz

Frequency Range: 4.2–18GHz

Gain: GAIN (at maximum setting) ......47 dB minimum GAIN ADJUSTMENT (continuous range)......35 dB minimum

Impedance: 50 ohms

Input: 99-260 VAC

Output: POWER (fundamental), CW, @ OUTPUT CONNECTOR Nominal .60 watts Minimum..50 watts Linear @ 1dB Compression..10 watts minimum

RF Connector: Type N female

RF Input Voltage: 1.0 milliwatt maximum for rated output

VIEW PRODUCT Cart
3ctest CCC100 EFT/Burst Coupling Clamp for IEC/EN 61000-4-4

SKU: 10621

Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)

Cable Diameter: up to 40 mm (1.57 in)

Coupling Length: 1 m (39.4 in)

Dimensions: 1040x140x110mm

EFT Coupling Clamps: as per IEC 61000-4-4

RF Connector: High voltage connector,coaxial. GND connection 4 mm plug, banana

Standards Met: IEC/EN 61000-4-4

Voltage Rating: up to 5.5kv

4 to 6 Weeks

VIEW PRODUCT Cart
Haefely PSURGE 4010 Combination Wave Generator

SKU: 10574

Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

Coupling: Internal Single Phase/16 Amps at 264 VAC and 110 VDC -(expandable to 3-Phase with external module); 18uF and 9uF+10 Ω acc. to IEC 61000-4-5

Polarity: positive, negative, alternating

Pulse current (short circuit): 100 Amps to 2.1 kA

Pulse repetition: up to 12 per minute

Pulse voltage (open circuit): 200 Volts to 4.2 kV

Standards Met: IEC 61000-4-5, EN 61000-6-1, EN 61000-6-2

Industries: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

Applications: Immunity to Electrical Surges (Test Setup)

Typically In Stock

VIEW PRODUCT Cart
Com-Power AM-741R Active Monopole Antenna with RAI-100, 9 kHz - 60 MHz

SKU: 3525

Weight: 9.5 lbs. [4.3 kg]

Antenna Factor (1 Meter): ±0.5 dB

Antennas: Monopole Antennas

Application/Test Type: radiated emissions measurements, typically below 30 MHz.

Connector: BNC (female)

Frequency Range: 9 kHz to 30 MHz (useable to 60 MHz)

Gain: See Image Thumbnail

Impedance: 50 Ohms

Mounting Base: 1/4" 20 thread

Standards Met: Mil-STD 461,DO-160

Cost New:

Was:

Price Now:

$299.99 - $4,325.00

In Stock

ORDERING OPTIONS
Com-Power CGC-255E Comb Generator 50 kHz - 400 MHz in 50 kHz/250 kHz steps

SKU: 11431

Weight: 1 lbs / 0.5 kg

AC Power Adapter: 6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 Hz

Application/Test Type: Reference Signal Source for LISN verification

Battery: 6V NiMH, 1 Ah

Dimensions: 5 x 2.2 x 2.2 inches / 13.2 x 5.9 x 5.9 cm

Frequency Range: 50 kHz to 400 MHz in 50 kHz or 250 kHz steps

Mains & EUT Connections: LISN Interface Plug NEMA 15-P type

Operation Time: 18 Hours Typical With Fully Charged Battery

Inquire for Availability

VIEW PRODUCT Cart
Haefely AXOS 8 7kV Surge & EFT Generator

SKU: 10405

Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations

Transient EMC Standards: IEC/EN 61000-4-4, IEC/EN 61000-4-5

Power Fail EMC Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29

Max EUT AC Voltage (w/ Built in CDN): 264 Volts

Max EUT AC Current (w/ Built in CDN): 16 Amps

Peak inrush current capability: 500 A (at 230 V)

External Coupling: Data Lines (EFT & Surge), 3PH EUT

Outputs: 4 mm banana socket

Inquire for Availability

VIEW PRODUCT Cart
Thermo Keytek ECAT Transient Generator System

SKU: 11321

Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.

Pulse repetition: 1 shot/9 seconds

Pulse voltage (open circuit): 200V - 6.6kV ± 10%

Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864

In Stock

VIEW PRODUCT Cart
Pearson 411 Surge Current Monitor up to 5kA Peak Current, 1Hz to 20 MHz

SKU: P-411

AC Current Handling (DC-400Hz): 50 Amps

RF Current Handling (CW/Pulse): 50/5,000 Amps

Style: Fixed Window

Diameter: 0.5"

Transfer Impedance: 1 Ohm

Test Standards: IEC 61000-4-5

Frequency Range: 1 Hz to 20 MHz

SEVERAL IN STOCK

VIEW PRODUCT Cart