EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  Schwarzbeck HFRA 5170 Transmit Loop Antenna For Calibrations

  SKU: 30107

  Frequency Range: 0 to 30 MHz

  Impedance: 50 Ω

  Input Impedance: 250 Ω

  Number of Turns: 1

  Loop Diameter: 100 mm

  Applications: Antenna Pattern Measurement

  Inquire for Lead Time

  VIEW PRODUCT Cart

• 

  Schwarzbeck LFPA 9733 Power Amplifier 5Hz - 1MHz

  SKU: 30019

  Frequency Range: 5 Hz – 1 MHz

  Gain (without load): 26 dB ±3 dB

  AC Impedance of load min: 0.25 Ω

  Typical input impedance: 1 kΩ

  Applications: Radiated Immunity

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Amplifier Research ATS700M11G Log Periodic Antenna

  SKU: 4353

  Frequency Range: 700 MHz to 10.5 GHz

  Impedance: 50 Ω nominal

  VSWR (Typical): <1.5:1 to 7 GHz, ≤2.8:1 7 GHz to 10.5 GHz

  Connector: N-Type (f)

  Front to Back Ratio: -15 dB (minimum)

  Applications: RF Radiated Susceptibility Testing

  Test Standards: IEC 61000-4-3

  Cost New:

  Was:

  Price Now:

  $1,095.00

  In Stock

  ORDERING OPTIONS

• 

  Steatite QWH-SL-2-18-S-HG-R Linearly Polarised High Gain Wideband Ridged Horn Antenna

  SKU: 1058

  Frequency: 2 to 18 GHz

  Gain: 9.3 to 22.8 degrees

  Antenna Factor: 24 to 35 dB/m

  Connector Type: SMA type jack

  Power Handling: 20 Watt c.w.

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Schwarzbeck FMZB 1513 Active Receive Loop Antenna

  SKU: 30113

  Applications: Antenna Pattern Measurement

  Test Standards: CISPR, MIL, FCC Part 15, ISO, ETSI

  Additional Test Standards: EN, ANSI

  Frequency Range: 9 kHz - 30 MHz

  Connector: 50 Ω N-Type (f)

  Frequency Response: < +/- 1 dB

  Loop Diameter: 0.5 m

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Teseq (Schaffner) NSG 2050 System PNW 2050 w/ CDN 131/133

  SKU: 11050

  Standards Met: IEC/EN 61000-4-5, IEC/ISO 60601-1-2

  Applications: EMC Surge, CE Marking, Surge Immunity

  Max EUT AC Voltage (W/ Built In CDN): 690 Volts

  Max EUT AC Current (W/ Built In CDN): 32 Amps

  Max EUT DC Voltage (W/ Built In CDN): 270 Volts

  Max EUT DC Current (W/ Built In CDN): 16 Amps

  Combination/Wave Surge Output Capability: 4.4 kV

  External Coupling: Data Lines (Surge), 3PH EUT

  Warranty: 100 Days

  Condition (5-10 Scale): 8

  Equipment Group: Combination Wave Generators

  Test Setup: Surge Immunity Test, Setup, Equipment

  Cost New:

  Was:

  Price Now:

  $5,975.00

  1 System Left

• 

  Amplifier Research 50W1000B 1 MHz - 1 GHz RF Power Amplifier

  SKU: 10922

  Frequency Range: 1 MHz - 1 GHz

  Output Power: 50 W

  Flatness: ±1.0 dB typical, ±1.5 dB maximum

  Gain: 47 dB minimum (at max setting)

  Imput Impedance: 50 ohms, VSWR 2.0:1 maximum

  Output Impedance: 50 ohms nominal

  Cost New:

  Was:

  Price Now:

  $695.00

  In Stock

  ORDERING OPTIONS

• 

  Fischer FCC F-120-6A BCI Injection Test Probe

  SKU: 11811

  Aperture: 40 mm

  Connector type: Type-N

  Test Standards: ISO 11452-4, IEC 61000-4-6 BCI, DO-160 Section 20, MIL-STD-461 CS114

  Frequency Range: 10 kHz – 400 MHz

  Input Power: 200 watts

  Insertion loss: less than 7dB/700kHz - 200MHz

  Rated Power: 100 CW

  Applications: EMC BCI Tests, Military EMC Testing

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Thermo Keytek E510A 10kV Surge Generator

  SKU: 10799

  Standards Met: ANSI/IEEE C62.41 Cat. B and IEC 61000 4-5

  Phase synchronization: ±15° with optional coupler/decoupler

  Pulse current (short circuit): 8/20µs, 0-5.05kA with 2 ohm effective source impedance, ±10%

  Pulse repetition: 1 shot/18 seconds

  Pulse voltage (open circuit): 1.2/50µs, 0-10.1kV ±10% in 1 volt steps

  Repetition time: Adjustable from 300ms to 5s; 1ms resolution

  Typically In Stock

  VIEW PRODUCT Cart

• 

  AH Systems TDS-535 Tuned Dipole Set, 25 MHz to 1 GHz, Receive and Transmit

  SKU: 10742

  Weight: 19 lbs.

  Antennas: Dipole Antennas

  Application/Test Type: precise EMI measurements

  Connector: N-type (female)

  Dimensions: Antenna Case: 28” x 23” x 7”

  Frequency Range: 25 MHz - 1 GHz

  Gain: Varies with Model

  Impedance: 50 ohm

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Amplifier Research 50T4G18, 50 Watts CW, 4.2–18GHz, (TWT) Microwave Amplifier

  SKU: sku-717

  Weight: 70 lbs, 32 kg

  Dimensions: 19.8 x 6.5 x 27 in., 50.3 x 16.5 x 68.6 cm.

  Flatness: ±10 dB maximum, 4.2 - 18 GHz

  Frequency Range: 4.2–18GHz

  Gain: GAIN (at maximum setting) ......47 dB minimum GAIN ADJUSTMENT (continuous range)......35 dB minimum

  Impedance: 50 ohms

  Input: 99-260 VAC

  Output: POWER (fundamental), CW, @ OUTPUT CONNECTOR Nominal .60 watts Minimum..50 watts Linear @ 1dB Compression..10 watts minimum

  RF Connector: Type N female

  RF Input Voltage: 1.0 milliwatt maximum for rated output

  VIEW PRODUCT Cart

• 

  3ctest CCC100 EFT/Burst Coupling Clamp for IEC/EN 61000-4-4

  SKU: 10621

  Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)

  Cable Diameter: up to 40 mm (1.57 in)

  Coupling Length: 1 m (39.4 in)

  Dimensions: 1040x140x110mm

  EFT Coupling Clamps: as per IEC 61000-4-4

  RF Connector: High voltage connector,coaxial. GND connection 4 mm plug, banana

  Standards Met: IEC/EN 61000-4-4

  Voltage Rating: up to 5.5kv

  4 to 6 Weeks

  VIEW PRODUCT Cart