Keysight N9038A-508 EMI Receiver Description
Keysight N9038A-508 EMI Receiver is a previous generation model (N9048B) but is compliant and meets all the current standards. The newer model has faster sweep times, improving emissions test times. The EMC Shop usually has a Keysight N9038A EMI receiver in stock and calibrated, available to ship immediately for rental.
The Keysight N9038A is a standards-compliant MXE EMI test receiver and diagnostic signal analyzer built on an upgradeable platform. You choose the frequency coverage you need to fully test devices with outstanding accuracy and sensitivity across required ranges.
- Perform EMC tests with a standard-compliant receiver: CISPR 16-1-1 & MIL-STD-461
- Keep the test queue flowing with the accuracy, repeatability and reliability you need to test with confidence
- Reduce overall scan time with time domain scanning enabled by fast FFT scans
- Easily identify the frequencies of peak emissions prior to final measurement with monitor spectrum
- Get enhanced diagnostics using spectrum and real-time analysis, strip chart, markers, span zoom, zoom span, and spectrogram
- Evaluate emissions and identify suspect signals using EMC measurements through the front panel or remotely with software
Keysight N9038A-508 EMI Receiver Specifications
Frequency range | DC coupled | AC coupled | ||||||||||||||||||||||||||||||||||||
Input 1 – Option 5034 – Option 508 – Option 526 – Option 544 |
3 Hz to 3.6 GHz 3 Hz to 8.4 GHz 3 Hz to 26.5 GHz 3 Hz to 44 GHz |
10 MHz to 3.6 GHz 10 MHz to 8.4 GHz 10 MHz to 26.5 GHz – |
||||||||||||||||||||||||||||||||||||
Input 2 | 3 Hz to 1 GHz | 10 MHz to 1 GHz | ||||||||||||||||||||||||||||||||||||
Band | LO multiple (N) | |||||||||||||||||||||||||||||||||||||
0 | 1 | 3 Hz to 3.6 GHz | ||||||||||||||||||||||||||||||||||||
1 | 1 | 3.5 to 8.4 GHz | ||||||||||||||||||||||||||||||||||||
2 | 2 | 8.3 to 13.6 GHz | ||||||||||||||||||||||||||||||||||||
3 | 2 | 13.5 to 17.1 GHz | ||||||||||||||||||||||||||||||||||||
4 | 4 | 17.0 to 26.5 GHz | ||||||||||||||||||||||||||||||||||||
5 | 4 | 26.4 to 34.5 GHz | ||||||||||||||||||||||||||||||||||||
6 | 8 | 34.4 to 44 GHz | ||||||||||||||||||||||||||||||||||||
Frequency reference | ||||||||||||||||||||||||||||||||||||||
Accuracy | ± [(time since last adjustment x aging rate) + temperature stability + calibration accuracy] | |||||||||||||||||||||||||||||||||||||
Total aging | ± 1 x 10–7 / year | |||||||||||||||||||||||||||||||||||||
± 1.5 x 10–7 / 2 years | ||||||||||||||||||||||||||||||||||||||
Temperature stability – 20 to 30 °C – Full temperature range |
± 1.5 x 10–8 ± 5 x 10–8 |
|||||||||||||||||||||||||||||||||||||
Achievable initial calibration accuracy |
± 4 x 10–8 | |||||||||||||||||||||||||||||||||||||
Residual FM | ≤ (0.25 Hz x N) p-p in 20 ms (nominal) | |||||||||||||||||||||||||||||||||||||
Frequency readout accuracy (start, stop, center, marker) | ||||||||||||||||||||||||||||||||||||||
± (marker frequency x frequency reference accuracy + 0.25 % x span + 5 % x RBW + 2 Hz + 0.5 x horizontal resolution 1) | ||||||||||||||||||||||||||||||||||||||
Marker frequency counter | ||||||||||||||||||||||||||||||||||||||
Accuracy | ± (marker frequency x frequency reference accuracy + 0.100 Hz) | |||||||||||||||||||||||||||||||||||||
Delta counter accuracy | ± (delta frequency x frequency reference accuracy + 0.141 Hz) | |||||||||||||||||||||||||||||||||||||
Counter resolution | 0.001 Hz | |||||||||||||||||||||||||||||||||||||
Frequency span (FFT and swept mode) | ||||||||||||||||||||||||||||||||||||||
Range | 0 Hz (zero span), 10 Hz to maximum frequency of instrument | |||||||||||||||||||||||||||||||||||||
Resolution | 2 Hz | |||||||||||||||||||||||||||||||||||||
Accuracy – Stepped/Swept – FFT |
± (0.25 % x span + horizontal resolution) ± (0.1% x span + horizontal resolution) |
|||||||||||||||||||||||||||||||||||||
1. Horizontal resolution is span/(sweep points – 1). | ||||||||||||||||||||||||||||||||||||||
Sweep time and triggering | ||||||||||||||||||||||||||||||||||||||
Range | Span = 0 Hz Span ≥ 10 Hz |
1 μs to 6000 s 1 ms to 4000 s |
||||||||||||||||||||||||||||||||||||
Accuracy | Span ≥ 10 Hz, swept Span ≥ 10 Hz, FFT Span = 0 Hz |
± 0.01 % (nominal) ± 40 % (nominal) ± 0.01 % (nominal) |
||||||||||||||||||||||||||||||||||||
Trigger | Free run, line, video, external 1, external 2, RF burst, periodic timer | |||||||||||||||||||||||||||||||||||||
Trigger delay | Span = 0 Hz or FFT Span ≥ 10 Hz, swept Resolution | –150 to +500 ms 0 μs to 500 ms 0.1 μs |
||||||||||||||||||||||||||||||||||||
Time gating | ||||||||||||||||||||||||||||||||||||||
Gate methods | Gated LO; gated video; gated FFT | |||||||||||||||||||||||||||||||||||||
Gate length range (except method = FFT) |
100.0 ns to 5.0 s | |||||||||||||||||||||||||||||||||||||
Gate delay range | 0 to 100.0 s | |||||||||||||||||||||||||||||||||||||
Gate delay jitter | 33.3 ns p-p (nominal) | |||||||||||||||||||||||||||||||||||||
Sweep (trace) point range | ||||||||||||||||||||||||||||||||||||||
All spans | 1 to 100,001 | |||||||||||||||||||||||||||||||||||||
Resolution bandwidth (RBW) | ||||||||||||||||||||||||||||||||||||||
EMI bandwidths (CISPR compliant) | 200 Hz, 9 KHz, 120 kHz, 1 MHz | |||||||||||||||||||||||||||||||||||||
EMI bandwidths (Mil STD 461 compliant) |
10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz, 1 MHz | |||||||||||||||||||||||||||||||||||||
Other bandwidths (–6 dB) | 30 Hz, 300 Hz, 3 kHz, 30 kHz, 300 kHz, 3 MHz, 10 MHz | |||||||||||||||||||||||||||||||||||||
Range (–3.01 dB bandwidth) | 1 Hz to 3 MHz (10 % steps, E24 series, 24 per decade), 4, 5, 6, 8 MHz | |||||||||||||||||||||||||||||||||||||
Bandwidth accuracy (power) | 1 Hz to 750 kHz 820 kHz to 1.2 MHz (< 3.6 GHz CF) 1.3 to 2 MHz (< 3.6 GHz CF) 2.2 to 3 MHz (< 3.6 GHz CF) 4 to 8 MHz (< 3.6 GHz CF) |
± 1.0 % (± 0.044 dB) ± 2.0 % (± 0.088 dB) ± 0.07 dB (nominal) ± 0.15 dB (nominal) ± 0.25 dB (nominal) |
||||||||||||||||||||||||||||||||||||
Bandwidth accuracy (–3.01 dB) | 1 Hz to 1.3 MHz | ± 2 % (nominal) | ||||||||||||||||||||||||||||||||||||
Selectivity (–60 dB/–3 dB) | 4.1:1 (nominal) | |||||||||||||||||||||||||||||||||||||
RF preselector filters | Filter band | Filter type | 6 dB BW (nominal) | |||||||||||||||||||||||||||||||||||
20 Hz to 150 kHz 150 kHz to 1 MHz 1 to 2 MHz 2 to 5 MHz 5 to 8 MHz 8 to 11 MHz 11 to 14 MHz 14 to 17 MHz 17 to 20 MHz 20 to 24 MHz 24 to 30 MHz 30 to 70 MHz 70 to 150 MHz 150 to 300 MHz 300 to 600 MHz 600 MHz to 1 GHz 1 to 2 GHz 2 to 3.6 GHz |
Fixed lowpass Fixed bandpass Fixed bandpass Fixed bandpass Fixed bandpass Fixed bandpass Fixed bandpass Fixed bandpass Fixed bandpass Fixed bandpass Fixed bandpass Tracking bandpass Tracking bandpass Tracking bandpass Tracking bandpass Tracking bandpass Tracking bandpass Fixed highpass | 310 kHz 1.7 MHz 2.4 MHz 7.5 MHz 10 MHz 9.5 MHz 9.5 MHz 10 MHz 9.5 MHz 9.5 MHz 9.0 MHz 10 MHz 24 MHz 28 MHz 50 MHz 60 MHz 180 MHz 1.89 GHz (–3 dB corner frequency) |
||||||||||||||||||||||||||||||||||||
Analysis bandwidth 1 | ||||||||||||||||||||||||||||||||||||||
Maximum bandwidth | Option B25 Standard |
25 MHz 10 MHz |
||||||||||||||||||||||||||||||||||||
Video bandwidth (VBW) | ||||||||||||||||||||||||||||||||||||||
Range | 1 Hz to 3 MHz (10 % steps, E24 series 24 per decade), 4, 5, 6, 8 MHz, and wide open (labeled 50 MHz) | |||||||||||||||||||||||||||||||||||||
Accuracy | ± 6 % (nominal) | |||||||||||||||||||||||||||||||||||||
Measurement speed 2 | Standard | |||||||||||||||||||||||||||||||||||||
Local measurement and display update rate | 4 ms (250/s) (nominal) | |||||||||||||||||||||||||||||||||||||
Remote measurement and LAN transfer rate | 5 ms (200/s) (nominal) | |||||||||||||||||||||||||||||||||||||
Marker peak search | 1.5 ms (nominal) | |||||||||||||||||||||||||||||||||||||
Center frequency tune and transfer (RF) | 20 ms (nominal) | |||||||||||||||||||||||||||||||||||||
Center frequency tune and transfer (μW) | 47 ms (nominal) | |||||||||||||||||||||||||||||||||||||
Measurement/mode switching | 39 ms (nominal) | |||||||||||||||||||||||||||||||||||||
Time domain sweep times | ||||||||||||||||||||||||||||||||||||||
CISPR band B, 150 kHz to 30 MHz, RBW = 9 kHz, measurement time = 100 ms, peak detector |
12.1 s (nominal) | |||||||||||||||||||||||||||||||||||||
CISPR band B, 150 kHz to 30 MHz, RBW = 9 kHz, measurement time = 1 s, quasi-peak detector |
181.7 s (nominal) | |||||||||||||||||||||||||||||||||||||
CISPR band C/D, 30 MHz to 1 GHz, RBW = 120 kHz, measurement time = 10 ms, peak detector | 3.1 s (nominal) | |||||||||||||||||||||||||||||||||||||
CISPR band C/D, 30 MHz to 1 GHz, RBW = 9 kHz, measurement time = 10 ms, peak detector |
18.1 s (nominal) | |||||||||||||||||||||||||||||||||||||
CISPR band C/D, 30 MHz to 1 GHz, RBW = 120 kHz, measurement time = 1 s, quasi-peak detector |
211.5 s (nominal) | |||||||||||||||||||||||||||||||||||||
1. Analysis bandwidth is the instantaneous bandwidth available around a center frequency over which the input signal can be digitized for further analysis or processing in the time, frequency, or modulation domain. 2. Sweep points = 101. |
||||||||||||||||||||||||||||||||||||||
Amplitude Accuracy and Range Specifications | ||||||||||||||||||||||||||||||||||||||
Amplitude range | ||||||||||||||||||||||||||||||||||||||
Measurement range | Displayed average noise level (DANL) to maximum safe input level | |||||||||||||||||||||||||||||||||||||
Input attenuator range | 0 to 70 dB in 2 dB steps | |||||||||||||||||||||||||||||||||||||
Maximum safe input level (with and without preamp) | RF Input 1 | RF Input 2 | ||||||||||||||||||||||||||||||||||||
Average total power | +30 dBm (1 W) | +30 dBm (1 W) | ||||||||||||||||||||||||||||||||||||
Peak pulse power | +45 dBm (31.6 W) | +50 dBm (100 W) | < 10 μs pulse width, < 1 % duty cycle and input attenuation ≥ 30 dB |
|||||||||||||||||||||||||||||||||||
Surge power | +2k W | (10 μs pulse width) | ||||||||||||||||||||||||||||||||||||
DC volts – DC coupled – AC coupled |
± 0.2 Vdc ± 100 Vdc |
± 0.2 Vdc ± 100 Vdc |
||||||||||||||||||||||||||||||||||||
Display range | ||||||||||||||||||||||||||||||||||||||
Log scale | 0.1 to 1 dB/division in 0.1 dB steps 1 to 20 dB/division in 1 dB steps (10 display divisions) |
|||||||||||||||||||||||||||||||||||||
Linear scale | 10 divisions | |||||||||||||||||||||||||||||||||||||
Scale units | dBm, dBmV, dBμV, dBmA, dBμA, V, W, A dBuV/m, dBuA/m, dBpT, dBG, dBpW |
|||||||||||||||||||||||||||||||||||||
Frequency response | Specification | 95th percentile (≈ 2σ) | ||||||||||||||||||||||||||||||||||||
Option 503, 508, or 526 (RF/μW) |
Option 544 (mmW) | Option 503, 508, or 526 (RF/μW) |
Option 544 (mmW) |
|||||||||||||||||||||||||||||||||||
(10 dB input attenuation, 20 to 30 °C, preselector centering applied, σ = nominal standard deviation) | ||||||||||||||||||||||||||||||||||||||
RF preselector off, preamp off | 3 Hz to 20 Hz 20 Hz to 10 MHz 1 10 to 50 MHz 50 MHz to 3.6 GHz 3.5 to 5.2 GHz 5.2 to 8.4 GHz 8.3 to 13.6 GHz 13.5 to 17.1 GHz 17 to 18 GHz 18 to 22 GHz 22 to 26.5 GHz 26.4 to 34.5 GHz 34.4 to 44 GHz |
± 0.6 dB ± 0.65 dB ± 0.65 dB ± 1.5 dB ± 1.5 dB ± 1.5 dB ± 1.5 dB ± 1.5 dB ± 1.7 dB ± 1.7 dB |
± 0.6 dB ± 0.65 dB ± 0.65 dB ± 1.6 dB ± 1.5 dB ± 1.5 dB ± 1.5 dB ± 1.7 dB ± 1.7 dB ± 1.7 dB ± 2.5 dB ± 3.2 dB |
± 0.25 dB (nominal) ± 0.22 dB ± 0.22 dB ± 0.22 dB ± 0.47 dB ± 0.47 dB ± 0.46 dB ± 0.53 dB ± 0.57 dB ± 0.64 dB ± 0.61 dB |
± 0.25 dB (nominal) ± 0.25 dB ± 0.21 dB ± 0.15 dB ± 0.6 dB ± 0.57 dB ± 0.54 dB ± 0.64 dB ± 0.72 dB ± 0.72 dB ± 0.71 dB ± 0.93 dB ± 1.24 dB |
|||||||||||||||||||||||||||||||||
RF preselector off, preamp on (0 dB attenuation) | 100 kHz to 3.6 GHz 1 100 kHz to 10 MHz 10 to 50 MHz 50 MHz to 3.6 GHz 3.5 to 8.4 GHz 3.5 to 5.2 GHz 5.2 to 8.4 GHz 8.3 to 13.6 GHz 13.5 to 17.1 GHz 17 to 18 GHz 18 to 22 GHz 17 to 22 GHz 22 to 26.5 GHz 26.4 to 34.5 GHz 34.4 to 44 GHz |
± 0.75 dB ± 1.85 dB ± 1.95 dB ± 1.8 dB ± 2.0 dB ± 2.85 dB ± 2.6 dB |
± 0.75 dB ± 0.75 dB ± 0.75 dB ± 2.2 dB ± 1.85 dB ± 1.95 dB ± 1.8 dB ± 2.85 dB ± 2.6 dB ± 3.0 dB ± 4.1 dB |
± 0.29 dB ± 0.63 dB ± 0.64 dB ± 0.81 dB ± 0.95 dB ± 1.23 dB ± 1.37 dB |
± 0.43 dB ± 0.29 dB ± 0.31 dB ± 0.9 dB ± 0.7 dB ± 0.79 dB ± 0.88 dB ± 1.07 dB ± 1.03 dB ± 1.35 dB ± 1.69 dB |
|||||||||||||||||||||||||||||||||
1. DC coupling required to meet specifications below 50 MHz. With AC coupling, specifications apply at frequencies of 50 MHz and higher. Statistical observations at 10 MHz with AC coupling show that most instruments meet the DC-coupled specifications, however, a small percentage of instruments are expected to have errors exceeding 0.5 dB at 10 MHz at the temperature extreme. The effect at 20 to 50 MHz is negligible but not warranted. | ||||||||||||||||||||||||||||||||||||||
Frequency response (Continued) | Specification | 95th percentile (≈ 2σ) | ||||||||||||||||||||||||||||||||||||
Option 503, 508, or 526 (RF/μW) |
Option 544 (mmW) | Option 503, 508, or 526 (RF/μW) |
Option 544 (mmW) |
|||||||||||||||||||||||||||||||||||
RF preselector on, preamp off | 3 Hz to 20 Hz 20 Hz to 300 MHz 1 300 MHz to 1 GHz 1 to 3.6 GHz 3.5 to 8.4 GHz 3.5 to 5.2 GHz 5.2 to 8.4 GHz 8.3 to 13.6 GHz 13.5 to 17.1 GHz 17 to 18 GHz 18 to 22 GHz 22 to 26.5 GHz 26.4 to 34.5 GHz 34.4 to 44 GHz |
± 0.65 dB ± 0.65 dB ± 0.85 dB ± 1.5 dB ± 1.5 dB ± 1.5 dB ± 1.5 dB ± 1.7 dB ± 1.7 dB |
± 0.65 dB ± 0.65 dB ± 0.85 dB ± 1.6 dB ± 1.5 dB ± 1.5 dB ± 1.5 dB ± 1.7 dB ± 1.7 dB ± 1.7 dB ± 2.5 dB ± 3.2 dB |
± 0.3 dB (nominal) ± 0.30 dB ± 0.28 dB ± 0.36 dB ± 0.47 dB ± 0.46 dB ± 0.53 dB ± 0.57 dB ± 0.64 dB ± 0.61 dB |
± 0.3 dB (nominal) ± 0.3 dB ± 0.28 dB ± 0.36 dB ± 0.6 dB ± 0.57 dB ± 0.54 dB ± 0.64 dB ± 0.72 dB ± 0.72 dB ± 0.71 dB ± 0.93 dB ± 1.24 dB |
|||||||||||||||||||||||||||||||||
RF preselector on, preamp on (0 dB attenuation) | 1 kHz to 30 MHz 1 30 to 300 MHz 1 300 MHz to 1 GHz 1 to 2.75 GHz 2.75 to 3.6 GHz 3.5 to 8.4 GHz 3.5 to 5.2 GHz 5.2 to 8.4 GHz 8.3 to 13.6 GHz 13.5 to 17.1 GHz 17 to 18 GHz 18 to 22 GHz 22 to 26.5 GHz 26.4 to 34.5 GHz 34.4 to 44 GHz |
± 0.8 dB ± 0.7 dB ± 0.65 dB ± 0.95 dB ± 1.15 dB ± 1.85 dB ± 1.95 dB ± 1.8 dB ± 2.0 dB ± 2.85 dB ± 2.6 dB |
± 0.8 dB ± 0.70 dB ± 0.65 dB ± 0.95 dB ± 1.15 dB ± 2.2 dB ± 1.85 dB ± 1.95 dB ± 1.8 dB ± 2.85 dB ± 2.85 dB ± 2.6 dB ± 3.0 dB ± 4.1 dB |
± 0.36 dB ± 0.29 dB ± 0.30 dB ± 0.45 dB ± 0.55 dB ± 0.63 dB ± 0.64 dB ± 0.81 dB ± 0.95 dB ± 1.23 dB ± 1.37 dB |
± 0.36 dB ± 0.29 dB ± 0.30 dB ± 0.45 dB ± 0.55 dB ± 0.9 dB ± 0.7 dB ± 0.79 dB ± 0.88 dB ± 1.07 dB ± 1.07 dB ± 1.03 dB ± 1.35 dB ± 1.69 dB |
|||||||||||||||||||||||||||||||||
1. DC coupling required to meet specifications below 50 MHz. With AC coupling, specifications apply at frequencies of 50 MHz and higher. Statistical observations at 10 MHz with AC coupling show that most instruments meet the DC-coupled specifications, however, a small percentage of instruments are expected to have errors exceeding 0.5 dB at 10 MHz at the temperature extreme. The effect at 20 to 50 MHz is negligible but not warranted. | ||||||||||||||||||||||||||||||||||||||
Input attenuation switching uncertainty | Specifications | |||||||||||||||||||||||||||||||||||||
Attenuation > 2 dB , preamp off Relative to 10 dB (reference setting) |
50 MHz (reference frequency) | ± 0.20 dB | ± 0.08 dB (typical) | |||||||||||||||||||||||||||||||||||
Absolute amplitude accuracy | Specifications | 95th percentile (≈ 2σ) | ||||||||||||||||||||||||||||||||||||
(10 dB attenuation, 20 to 30 °C, 1 Hz ≤ RBW ≤ 1 MHz, input signal –10 to –50 dBm, all settings auto-coupled except Auto Swp Time = Accy, any reference level, any scale, σ = nominal standard deviation) | ||||||||||||||||||||||||||||||||||||||
RF preselector off and on, preamp off and on | ||||||||||||||||||||||||||||||||||||||
RF input 1 to 44 GHz | At 50 MHz At all frequencies |
± 0.33 dB ± (0.33 dB + frequency response) |
± 0.25 dB | |||||||||||||||||||||||||||||||||||
RF input 2 to 1 GHz | At 50 MHz At all frequencies |
± 0.36 dB ± (0.36 dB + frequency response) |
± 0.27 dB | |||||||||||||||||||||||||||||||||||
Input voltage standing wave ratio (VSWR) | Input attenuation 0 dB | Input attenuation ≥ 10 dB | ||||||||||||||||||||||||||||||||||||
RF preselector off, preamp on and off | ||||||||||||||||||||||||||||||||||||||
DC coupled | 1 to 18 GHz 18 to 26.5 GHz 26.5 to 40 GHz 40 to 44 GHz |
3.0:1 3.0:1 3.0:1 — |
2.0:1 2.0:1 2.5:1 — |
|||||||||||||||||||||||||||||||||||
AC coupled | 1 to 18 GHz 18 to 26.5 GHz |
3.0:1 3.0:1 |
2.0:1 2.4:1 |
|||||||||||||||||||||||||||||||||||
RF preselector on, preamp on and off | ||||||||||||||||||||||||||||||||||||||
DC coupled | 9 kHz to 1 GHz 1 to 26.5 GHz 26.5 to 40 GHz 40 to 44 GHz |
2.0:1 3.0:1 3.0:1 — |
1.2:1 2.0:1 2.5:1 — |
|||||||||||||||||||||||||||||||||||
AC coupled | 50 MHz to 1 GHz 1 to 18 GHz 18 to 26.5 GHz |
2.0:1 3.0:1 3.0:1 |
1.2:1 2.0:1 2.4:1 |
|||||||||||||||||||||||||||||||||||
Resolution bandwidth switching uncertainty (referenced to 30 kHz RBW) | ||||||||||||||||||||||||||||||||||||||
1 Hz to 1.5 MHz RBW | ± 0.05 dB | |||||||||||||||||||||||||||||||||||||
1.6 to 3 MHz RBW | ± 0.10 dB | |||||||||||||||||||||||||||||||||||||
4, 5, 6, 8 MHz RBW | ± 1.0 dB | |||||||||||||||||||||||||||||||||||||
Reference level | ||||||||||||||||||||||||||||||||||||||
Range | ||||||||||||||||||||||||||||||||||||||
– Log scale | –170 to +30 dBm in 0.01 dB steps | |||||||||||||||||||||||||||||||||||||
– Linear scale | Same as log (707 pV to 7.07 V) | |||||||||||||||||||||||||||||||||||||
Accuracy | 0 dB | |||||||||||||||||||||||||||||||||||||
Display scale switching uncertainty | ||||||||||||||||||||||||||||||||||||||
Switching between linear and log | 0 dB | |||||||||||||||||||||||||||||||||||||
Log scale/div switching | 0 dB | |||||||||||||||||||||||||||||||||||||
Display scale fidelity | ||||||||||||||||||||||||||||||||||||||
Between –10 dBm and –80 dBm input mixer level |
± 0.10 dB total | |||||||||||||||||||||||||||||||||||||
Total measurement uncertainty 1 | 95th percentile (≈ 2σ) | |||||||||||||||||||||||||||||||||||||
Signal level 0 to 90 dB below reference point, RF attenuation 0 to 40 dB, RBW ≤ 3 MHz, 20º to 30º C: AC coupled 10 MHz to 26.5 GHz DC coupled 9 kHz to 40 GHz | ||||||||||||||||||||||||||||||||||||||
Option 503, 508, or 526 (RF/μW) |
Option 544 (mmW) | |||||||||||||||||||||||||||||||||||||
RF preselector off, preamp off | 1 kHz to 2 GHz 2 to 3.6 GHz 3.6 to 8 GHz 8 to 18 GHz 18 to 26.5 GHz 26.5 to 40 GHz 40 to 44 GHz |
± 0.50 dB ± 0.60 dB ± 0.80 dB ± 1.10 dB ± 1.60 dB |
± 0.50 dB ± 0.60 dB ± 1.70 dB ± 1.30 dB ± 1.60 dB ± 1.70 dB ± 2.30 dB |
|||||||||||||||||||||||||||||||||||
RF preselector off, preamp on | 100 kHz to 2 GHz 2 to 3.6 GHz 3.6 to 8 GHz 8 to 18 GHz 18 to 26.5 GHz 26.5 to 40 GHz 40 to 44 GHz |
± 0.60 dB ± 0.60 dB ± 1.10 dB ± 1.30 dB ± 1.90 dB |
± 0.60 dB ± 0.60 dB ± 1.80 dB ± 1.30 dB ± 1.90 dB ± 1.90 dB ± 2.40 dB |
|||||||||||||||||||||||||||||||||||
1. Specified for instruments with prefixes MY/SG5322 or greater. | ||||||||||||||||||||||||||||||||||||||
Total measurement uncertainty 1 (Continued) |
95th percentile (≈ 2σ) | |||||||||||||||||||||||||||||||||||||
RF preselector on, preamp off | 9 kHz to 2 GHz 2 to 3.6 GHz 3.6 to 8 GHz 8 to 18 GHz 18 to 26.5 GHz 26.5 to 40 GHz 40 to 44 GHz |
± 0.50 dB ± 0.50 dB ± 0.80 dB ± 1.10 dB ± 1.60 dB |
± 0.50 dB ± 0.50 dB ± 1.70 dB ± 1.30 dB ± 1.60 dB ± 1.70 dB ± 2.30 dB |
|||||||||||||||||||||||||||||||||||
RF preselector on, preamp on | 9 kHz to 2 GHz 2 to 3.6 GHz 3.6 to 8 GHz 8 to 18 GHz 18 to 26.5 GHz 26.5 to 40 GHz 40 to 44 GHz |
± 0.50 dB ± 0.70 dB ± 1.10 dB ± 1.30 dB ± 1.90 dB |
± 0.50 dB ± 0.70 dB ± 1.80 dB ± 1.30 dB ± 1.90 dB ± 1.90 dB ± 2.40 dB |
|||||||||||||||||||||||||||||||||||
Trace detectors | ||||||||||||||||||||||||||||||||||||||
Normal, peak, sample, negative peak, log power average, RMS average, and voltage average | ||||||||||||||||||||||||||||||||||||||
CISPR detectors: quasi-peak, EMI-avg, RMS-avg | ||||||||||||||||||||||||||||||||||||||
Preamplifier | ||||||||||||||||||||||||||||||||||||||
Gain | ||||||||||||||||||||||||||||||||||||||
– RF preselector off | 100 kHz to 3.6 GHz 3.6 to 26.5 GHz 26.5 to 44 GHz |
+20 dB (nominal) +35 dB (nominal) +40 dB (nominal) |
||||||||||||||||||||||||||||||||||||
– RF preselector on | 9 kHz to 3.6 GHz 3.6 to 26.5 GHz 26.5 to 44 GHz |
+20 dB (nominal) +35 dB (nominal) +40 dB (nominal) |
||||||||||||||||||||||||||||||||||||
Amplitude probability distribution | ||||||||||||||||||||||||||||||||||||||
Dynamic range | > 70 dB | |||||||||||||||||||||||||||||||||||||
Amplitude accuracy | < ± 2.7 dB | |||||||||||||||||||||||||||||||||||||
Maximum measureable time period (no dead time) |
2 minutes | |||||||||||||||||||||||||||||||||||||
Minimum measureable probability | 10–7 | |||||||||||||||||||||||||||||||||||||
Amplitude level assignment | 1000 levels | |||||||||||||||||||||||||||||||||||||
Sampling rate | ≥ 10 MSa/s (within a 1 MHz RBW) | |||||||||||||||||||||||||||||||||||||
Amplitude resolution | 0.1881 dB | |||||||||||||||||||||||||||||||||||||
1. Specified for instruments with prefixes MY/SG5322 or greater. | ||||||||||||||||||||||||||||||||||||||
Dynamic Range Specifications | ||||||||||||||||||||||||||||||||||||||
1 dB gain compression | Specification | Typical | ||||||||||||||||||||||||||||||||||||
Maximum power at mixer | ||||||||||||||||||||||||||||||||||||||
Frequency range | Option 503, 508, or 526 (RF/μW) |
Option 544 (mmW) | Option 503, 508, or 526 (RF/μW) |
Option 544 (mmW) | ||||||||||||||||||||||||||||||||||
RF Input 1 to 44 GHz (RF Input 2 to 1 GHz, performance = RF Input 1 performance + 9 dB) | ||||||||||||||||||||||||||||||||||||||
RF preselector on and off, preamp off | 9 kHz to 10 MHz | +4 dBm (nominal) | +4 dBm (nominal) | |||||||||||||||||||||||||||||||||||
10 to 500 MHz | 0 dBm | 0 dBm | +3 dBm (typical) | +3 dBm (typical) | ||||||||||||||||||||||||||||||||||
500 MHz to 3.6 GHz | +1 dBm | +1 dBm | +5 dBm (typical) | +5 dBm (typical) | ||||||||||||||||||||||||||||||||||
3.6 to 26.5 GHz | 0 dBm | 0 dBm | +4 dBm (typical) | +4 dBm (typical) | ||||||||||||||||||||||||||||||||||
26.4 to 44 GHz | –1 dBm | +2 dBm (nominal) | ||||||||||||||||||||||||||||||||||||
RF preselector off, preamp on | 10 MHz to 3.6 GHz | –13 dBm (nominal) | −13 dBm (nominal) | |||||||||||||||||||||||||||||||||||
3.6 to 26.5 GHz | ||||||||||||||||||||||||||||||||||||||
Tone spacing 100 kHz to 20 MHz | −26 dBm (nominal) | −30 dBm (nominal) | ||||||||||||||||||||||||||||||||||||
Tone spacing > 70 MHz | −16 dBm (nominal) | −16 dBm (nominal) | ||||||||||||||||||||||||||||||||||||
26.4 to 44 GHz | −30 dBm (nominal) | |||||||||||||||||||||||||||||||||||||
RF preselector on, preamp on | 9 kHz to 10 MHz | –16 dBm (nominal) | –16 dBm (nominal) | |||||||||||||||||||||||||||||||||||
10 to 2 GHz | –18 dBm (typical) | –21 dBm (typical) | ||||||||||||||||||||||||||||||||||||
2 GHz to 3.6 GHz | –16 dBm (typical) | –17 dBm (typical) | ||||||||||||||||||||||||||||||||||||
3.6 to 26.5 GHz | ||||||||||||||||||||||||||||||||||||||
Tone spacing, 100 kHz to 20 MHz | −26 dBm (nominal) | −30 dBm (nominal) | ||||||||||||||||||||||||||||||||||||
Tone spacing > 70 MHz | −16 dBm (nominal) | −16 dBm (nominal) | ||||||||||||||||||||||||||||||||||||
26.4 to 44 GHz | −30 dBm (nominal) | |||||||||||||||||||||||||||||||||||||
Displayed average noise level (DANL) | ||||||||||||||||||||||||||||||||||||||
(Input terminated, sample or average detector, averaging type = Log, 0 dB input attenuation, IF Gain = High, 20 to 30 °C) RF Input 1; RF Input 2 to 1 GHz; RF Input 2 performance = RF Input 1 performance +11 dB | ||||||||||||||||||||||||||||||||||||||
Specification | Typical including NFE 1 | |||||||||||||||||||||||||||||||||||||
RF preselector off, preamp off | 3 Hz to 10 Hz 20 Hz 2 100 Hz 2 1 kHz 2 9 kHz 100 kHz 1 MHz 10 MHz to 2.1 GHz 2.1 to 3.6 GHz 3.5 to 8.4 GHz Option 544 8.3 to 13.6 GHz Option 544 13.5 to 17.1 GHz 17.0 to 20.0 GHz 20.0 to 26.5 GHz 26.4 to 34.5 GHz 34.4 to 44 GHz |
— –97 dBm –106 dBm –118 dBm –119 dBm –131 dBm –150 dBm –150 dBm –148 dBm –148 dBm –145 dBm –147 dBm –147 dBm –141 dBm –142 dBm –135 dBm –141 dBm –135 dBm |
–97 dBm (nominal) 3 — — — — — — –158 dBm –157 dBm –159 dBm –153 dBm –158 dBm –156 dBm –151 dBm –152 dBm –146 dBm –148 dBm –143 dBm |
|||||||||||||||||||||||||||||||||||
RF preselector off, preamp on | 100 kHz 1 MHz 10 MHz to 2.1 GHz 2.1 to 3.6 GHz 3.5 to 8.4 GHz Option 544 8.3 to 13.6 GHz Option 544 13.5 to 17.1 GHz 17.0 to 20.0 GHz 20.0 to 26.5 GHz 26.4 to 34.5 GHz 34.4 to 44 GHz |
–144 dBm –162 dBm –163 dBm –161 dBm –164 dBm –161 dBm –162 dBm –161 dBm –160 dBm –158 dBm –155 dBm –156 dBm –150 dBm |
— — –175 dBm –173 dBm –172 dBm –166 dBm –173 dBm –170 dBm –171 dBm –165 dBm –162 dBm –164 dBm –158 dBm |
|||||||||||||||||||||||||||||||||||
1. Typical Indicated Noise including NFE = typical DANL+ Bandwidth and Log corrrections-DANL improvement with NFE. 2. Specified for instruments with prefixes MY/SG5213 or greater. Nominal for instruments with earlier prefixes. 3. No NFE at this frequency. |
||||||||||||||||||||||||||||||||||||||
Displayed average noise level (DANL) (Continued) | ||||||||||||||||||||||||||||||||||||||
(Input terminated, sample or average detector, averaging type = Log, 0 dB input attenuation, IF Gain = High, 20 to 30 °C) RF Input 1; RF Input 2 to 1 GHz; RF Input 2 performance = RF Input 1 performance +11 dB | ||||||||||||||||||||||||||||||||||||||
Specification | Typical including NFE 1 | |||||||||||||||||||||||||||||||||||||
RF preselector on, | 3 to 10 Hz | — | –92 dBm (nominal) 2 | |||||||||||||||||||||||||||||||||||
preamp off | 20 Hz 3 | –92 dBm | –100 dBm 2 | |||||||||||||||||||||||||||||||||||
100 Hz 3 | –101 dBm | –109 dBm 2 | ||||||||||||||||||||||||||||||||||||
1 kHz 3 | –114 dBm | –120 dBm 2 | ||||||||||||||||||||||||||||||||||||
9 kHz | –118 dBm | –132 dBm | ||||||||||||||||||||||||||||||||||||
100 kHz | –130 dBm | –143 dBm | ||||||||||||||||||||||||||||||||||||
1 to 3 MHz | –147 dBm | –158 dBm | ||||||||||||||||||||||||||||||||||||
3 to 30 MHz | –150 dBm | –160 dBm | ||||||||||||||||||||||||||||||||||||
30 to 300 MHz | –151 dBm | –161 dBm | ||||||||||||||||||||||||||||||||||||
300 to 600 MHz | –153 dBm | –164 dBm | ||||||||||||||||||||||||||||||||||||
600 MHz to 1 GHz | –151 dBm | –162 dBm | ||||||||||||||||||||||||||||||||||||
1 to 2 GHz | –150 dBm | –161 dBm | ||||||||||||||||||||||||||||||||||||
2 to 2.5 GHz | –152 dBm | –164 dBm | ||||||||||||||||||||||||||||||||||||
2.5 to 3 GHz | –151 dBm | –163 dBm | ||||||||||||||||||||||||||||||||||||
3 to 3.6 GHz | –148 dBm | –161 dBm | ||||||||||||||||||||||||||||||||||||
3.5 to 8.4 GHz | –148 dBm | –159 dBm | ||||||||||||||||||||||||||||||||||||
– Option 544 | –145 dBm | –153 dBm | ||||||||||||||||||||||||||||||||||||
8.3 to 13.6 GHz | –147 dBm | –158 dBm | ||||||||||||||||||||||||||||||||||||
– Option 544 | –147 dBm | –156 dBm | ||||||||||||||||||||||||||||||||||||
13.5 to 17.1 GHz | –141 dBm | –151 dBm | ||||||||||||||||||||||||||||||||||||
17.0 to 20.0 GHz | –142 dBm | –152 dBm | ||||||||||||||||||||||||||||||||||||
20.0 to 26.5 GHz | –135 dBm | –146 dBm | ||||||||||||||||||||||||||||||||||||
26.4 to 34.5 GHz | –141 dBm | –148 dBm | ||||||||||||||||||||||||||||||||||||
34.4 to 44 GHz | –135 dBm | –143 dBm | ||||||||||||||||||||||||||||||||||||
RF preselector on, preamp on | 1 kHz 3 | –119 dBm | –133 dBm 2 | |||||||||||||||||||||||||||||||||||
9 kHz | –143 dBm | –154 dBm | ||||||||||||||||||||||||||||||||||||
100 kHz | –154 dBm | –165 dBm | ||||||||||||||||||||||||||||||||||||
1 to 2 MHz | –166 dBm | –178 dBm | ||||||||||||||||||||||||||||||||||||
2 to 30 MHz | –158 dBm | –167 dBm | ||||||||||||||||||||||||||||||||||||
30 to 600 MHz | –159 dBm | –166 dBm | ||||||||||||||||||||||||||||||||||||
600 to 800 MHz | –157 dBm | –166 dBm | ||||||||||||||||||||||||||||||||||||
800 MHz to 1 GHz | –158 dBm | –167 dBm | ||||||||||||||||||||||||||||||||||||
1 to 2 GHz | –156 dBm | –164 dBm | ||||||||||||||||||||||||||||||||||||
2 to 2.75 GHz | –160 dBm | –168 dBm | ||||||||||||||||||||||||||||||||||||
2.75 to 3.6 GHz | –157 dBm | –165 dBm | ||||||||||||||||||||||||||||||||||||
3.5 to 8.4 GHz | –164 dBm | –172 dBm | ||||||||||||||||||||||||||||||||||||
– Option 544 | –161 dBm | –166 dBm | ||||||||||||||||||||||||||||||||||||
8.3 to 13.6 GHz | –162 dBm | –173 dBm | ||||||||||||||||||||||||||||||||||||
– Option 544 | –161 dBm | –170 dBm | ||||||||||||||||||||||||||||||||||||
13.5 to 17.1 GHz | –160 dBm | –171 dBm | ||||||||||||||||||||||||||||||||||||
17.0 to 20.0 GHz | –158 dBm | –165 dBm | ||||||||||||||||||||||||||||||||||||
20.0 to 26.5 GHz | –155 dBm | –162 dBm | ||||||||||||||||||||||||||||||||||||
26.4 to 34.5 GHz | –156 dBm | –164 dBm | ||||||||||||||||||||||||||||||||||||
34.4 to 44 GHz | –150 dBm | –158 dBm | ||||||||||||||||||||||||||||||||||||
1. Typical DANL including NFE = Typical DANL-DANL improvement with NFE. 2. No NFE factor at this frequency. 3. Specified for instruments with prefixes MY/SG5213 or greater. Nominal for instruments with earlier prefixes. |
||||||||||||||||||||||||||||||||||||||
Indicated noise in CISPR BW | ||||||||||||||||||||||||||||||||||||||
Calculated from DANL data; EMI-AVG detector, 0 dB input attenuation; indicated RBW is CISPR RBW RF Input 1; RF Input 2 to 1 GHz; RF Input 2 performance = RF Input 1 performance +11 dB |
||||||||||||||||||||||||||||||||||||||
Typical including NFE 1 | ||||||||||||||||||||||||||||||||||||||
RF preselector on, preamp off | 3 to 10 Hz (1 Hz RBW) 3 | + 17 dBuV 2 (nominal) | ||||||||||||||||||||||||||||||||||||
20 Hz (1 Hz) 3 | +9 dBuV 2 | |||||||||||||||||||||||||||||||||||||
100 Hz (10 Hz) 3 | +10 dBuV 2 | |||||||||||||||||||||||||||||||||||||
1 kHz (100 Hz) 3 | +9 dBuV 2 | |||||||||||||||||||||||||||||||||||||
9 kHz (200 Hz) | –2 dBuV | |||||||||||||||||||||||||||||||||||||
100 kHz (200 Hz) | –13 dBuV | |||||||||||||||||||||||||||||||||||||
1 to 3 MHz (9 kHz) | –11 dBuV | |||||||||||||||||||||||||||||||||||||
3 to 30 MHz (9 kHz) | –13 dBuV | |||||||||||||||||||||||||||||||||||||
30 to 300 MHz (120 kHz) | –3 dBuV | |||||||||||||||||||||||||||||||||||||
300 to 600 MHz (120 kHz) | –6 dBuV | |||||||||||||||||||||||||||||||||||||
600 MHz to 1 GHz (120 kHz) | –4 dBuV | |||||||||||||||||||||||||||||||||||||
1 to 2 GHz (1 MHz) | +6 dBuV | |||||||||||||||||||||||||||||||||||||
2 to 2.5 GHz (1 MHz) | +3 dBuV | |||||||||||||||||||||||||||||||||||||
2.5 to 3 GHz (1 MHz) | +4 dBuV | |||||||||||||||||||||||||||||||||||||
3 to 3.6 GHz (1 MHz) | +6 dBuV | |||||||||||||||||||||||||||||||||||||
3.5 to 8.4 GHz (1 MHz) | +8 dBuV | |||||||||||||||||||||||||||||||||||||
– Option 544 | +14 dBuV | |||||||||||||||||||||||||||||||||||||
8.3 to 13.6 GHz (1 MHz) | +9 dBuV | |||||||||||||||||||||||||||||||||||||
– Option 544 | +11 dBuV | |||||||||||||||||||||||||||||||||||||
13.5 to 17.1 GHz (1 MHz) | +16 dBuV | |||||||||||||||||||||||||||||||||||||
17.0 to 20.0 GHz (1 MHz) | +15 dBuV | |||||||||||||||||||||||||||||||||||||
20.0 to 26.5 GHz (1 MHz) | +21 dBuV | |||||||||||||||||||||||||||||||||||||
26.4 to 34.5 GHz (1 MHz) | +19 dBuV | |||||||||||||||||||||||||||||||||||||
34.4 to 44 GHz (1 MHz) | +24 dBuV | |||||||||||||||||||||||||||||||||||||
RF preselector on, preamp on | 1 kHz (100 Hz RBW) 3 | –4 dBuV 2 | ||||||||||||||||||||||||||||||||||||
9 kHz (200 Hz) | –24 dBuV | |||||||||||||||||||||||||||||||||||||
100 kHz (200 Hz) | –35 dBuV | |||||||||||||||||||||||||||||||||||||
1 to 2 MHz (9 kHz) | –31 dBuV | |||||||||||||||||||||||||||||||||||||
2 to 30 MHz (9 kHz) | –20 dBuV | |||||||||||||||||||||||||||||||||||||
30 to 600 MHz (120 kHz) | –8 dBuV | |||||||||||||||||||||||||||||||||||||
600 to 800 MHz (120 kHz) | –8 dBuV | |||||||||||||||||||||||||||||||||||||
800 MHz to 1 GHz (120 kHz) | –9 dBuV | |||||||||||||||||||||||||||||||||||||
1 to 2 GHz (1 MHz) | +3 dBuV | |||||||||||||||||||||||||||||||||||||
2 to 2.75 GHz (1 MHz) | –1 dBuV | |||||||||||||||||||||||||||||||||||||
2.75 to 3.6 GHz (1 MHz) | +2 dBuV | |||||||||||||||||||||||||||||||||||||
3.5 to 8.4 GHz (1 MHz) | –5 dBuV | |||||||||||||||||||||||||||||||||||||
– Option 544 | –1 dBuV | |||||||||||||||||||||||||||||||||||||
8.3 to 13.6 GHz (1 MHz) | –6.0 dBuV | |||||||||||||||||||||||||||||||||||||
– Option 544 | –4 dBuV | |||||||||||||||||||||||||||||||||||||
13.5 to 17.1 GHz (1 MHz) | –4 dBuV | |||||||||||||||||||||||||||||||||||||
17.0 to 20.0 GHz (1 MHz) | +2 dBuV | |||||||||||||||||||||||||||||||||||||
20.0 to 26.5 GHz (1 MHz) | +5 dBuV | |||||||||||||||||||||||||||||||||||||
26.4 to 34.5 GHz (1 MHz) | +3 dBuV | |||||||||||||||||||||||||||||||||||||
34.4 to 44 GHz (1 MHz) | +9 dBuV | |||||||||||||||||||||||||||||||||||||
1. Typical Indicated Noise including NFE = Typical DANL+ Bandwidth and Log corrrections-DANL improvement with NFE. 2. No NFE factor at this frequency. 3. Specified for instruments with prefixes MY/SG5213 or greater. Nominal for instruments with earlier prefixes. |
||||||||||||||||||||||||||||||||||||||
Spurious responses | ||||||||||||||||||||||||||||||||||||||
RF Input 1; RF preselector on and off Source frequency Specification Typical |
||||||||||||||||||||||||||||||||||||||
Residual responses 1 (Input terminated and 0 dB attenuation) Image responses f ± 645 MHz Mixer level –10 dBm |
200 kHz to 8.4 GHz (swept) Zero span or FFT or other frequencies 10 MHz to 3.6 GHz 3.5 to 13.6 GHz 13.5 to 17.1 GHz 17.0 to 22 GHz 22 to 26.5 GHz 26.5 to 34.5 GHz 3 34.4 to 44 GHz 3 |
–100 dBm –100 dBm (nominal) –80 dBc –78 dBc –74 dBc –70 dBc –68 dBc –70 dBc –60 dBc |
||||||||||||||||||||||||||||||||||||
–108 dBc –88 dBc –85 dBc –82 dBc –78 dBc –94 dBc –79 dBc |
||||||||||||||||||||||||||||||||||||||
LO related spurious – (f > 600 MHz from carrier) Other spurious |
10 MHz to 3.6 GHz –90 dBc + 20xlogN 2 | |||||||||||||||||||||||||||||||||||||
|
–80 dBc + 20xlogN 2 | –90 dBc (nominal) | ||||||||||||||||||||||||||||||||||||
Second harmonic distortion (SHI) | ||||||||||||||||||||||||||||||||||||||
RF Input 1; input power –9 dBm, input attenuation 6 dB; RF Input 2 to 1 GHz. RF Input 2 performance = RF Input 1 performance +9 dB Source frequency Specification Typical |
||||||||||||||||||||||||||||||||||||||
RF preselector off, preamp off | 10 MHz to 1.0 GHz | +45 dBm | +54 dBm | |||||||||||||||||||||||||||||||||||
1.0 to 1.8 GHz | +41 dBm | +50 dBm | ||||||||||||||||||||||||||||||||||||
1.8 to 6.8 GHz | +65 dBm | +68 dBm | ||||||||||||||||||||||||||||||||||||
Option 544 1.8 to 3 GHz | +58 dBm | +64 dBm | ||||||||||||||||||||||||||||||||||||
3 to 6.8 GHz | +60 dBm | +69 dBm | ||||||||||||||||||||||||||||||||||||
6.8 to 11 GHz | +55 dBm | +64 dBm | ||||||||||||||||||||||||||||||||||||
11 to 13.25 GHz | +50 dBm | +60 dBm | ||||||||||||||||||||||||||||||||||||
13.2 to 22 GHz (Option 544) | +44 dBm | +51 dBm | ||||||||||||||||||||||||||||||||||||
RF preselector off, preamp on | ||||||||||||||||||||||||||||||||||||||
– Preamp power = –45 dBm | 10 MHz to 1.8 GHz | +33 dBm (nominal) | ||||||||||||||||||||||||||||||||||||
– Preamp power = –50 dBm | 1.8 to 13.25 GHz | +10 dBm (nominal) | ||||||||||||||||||||||||||||||||||||
13.2 to 22 GHz (Option 544) | +0 dBm (nominal) | |||||||||||||||||||||||||||||||||||||
RF preselector on, preamp off | 10 to 30 MHz | +47 dBm | +50 dBm | |||||||||||||||||||||||||||||||||||
30 to 500 MHz | +57 dBm | +63 dBm | ||||||||||||||||||||||||||||||||||||
500 MHz to 1GHz | +45 dBm | +47 dBm | ||||||||||||||||||||||||||||||||||||
1 to 1.6 GHz | +58 dBm | +70 dBm | ||||||||||||||||||||||||||||||||||||
1.6 to 1.8 GHz | +46 dBm | +52 dBm | ||||||||||||||||||||||||||||||||||||
1.8 to 6.8 GHz | +65 dBm | +68 dBm | ||||||||||||||||||||||||||||||||||||
Option 544 1.8 to 3 GHz | +58 dBm | +64 dBm | ||||||||||||||||||||||||||||||||||||
3 to 6.8 GHz | +60 dBm | +69 dBm | ||||||||||||||||||||||||||||||||||||
6.8 to 11 GHz | +55 dBm | +64 dBm | ||||||||||||||||||||||||||||||||||||
11 to 13.25 GHz | +50 dBm | +60 dBm | ||||||||||||||||||||||||||||||||||||
13.2 to 22 GHz (Option 544) | +44 dBm | +51 dBm | ||||||||||||||||||||||||||||||||||||
RF preselector on, preamp on, | 10 to 300 MHz | +53 dBm (nominal) | ||||||||||||||||||||||||||||||||||||
– Input power = –9 dBm | 300 to 500 MHz | +58 dBm (nominal) | ||||||||||||||||||||||||||||||||||||
500 MHz to 1 GHz 1 to 1.6 GHz 1.6 to 1.8 GHz 1.8 to 13.25 GHz 13.2 to 22 GHz (Option 544) |
+47 dBm (nominal) +53 dBm (nominal) +30 dBm (nominal) +10 dBm (nominal) +0 dBm (nominal) |
|||||||||||||||||||||||||||||||||||||
– Attenuation = 26 dB – Preamp power = –50 dBm |
||||||||||||||||||||||||||||||||||||||
1. RF2 performance = RF1 performance +11 dB. 2. N is the LO multiplication factor. 3. Mixer level -30 dBm. |
||||||||||||||||||||||||||||||||||||||
Third-order intermodulation distortion (TOI) | ||||||||||||||||||||||||||||||||||||||
(Two –14 dBm tones at input and 4 dB of input attenuation; tone separation > 5 times IF prefilter bandwidth, 20 to 30 °C, see Specifications Guide for IF prefilter bandwidths); RF Input 1; RF Input 2 to 1 GHz; RF Input 2 performance = RF Input 1 performance +9 dB | ||||||||||||||||||||||||||||||||||||||
TOI | TOI (typical) | |||||||||||||||||||||||||||||||||||||
RF preselector off, preamp off | 10 to 100 MHz 100 to 400 MHz 400 MHz to 1.7 GHz 1.7 to 3.6 GHz 3.5 to 8.4 GHz 8.3 to 13.6 GHz 13.5 to 26.5 GHz 26.4 to 44 GHz |
+12 dBm +15 dBm +16 dBm +16 dBm +15 dBm +15 dBm +10 dBm +10 dBm |
+17 dBm +20 dBm +20 dBm +19 dBm +18 dBm +18 dBm +14 dBm +13 dBm |
|||||||||||||||||||||||||||||||||||
RF preselector off, preamp on | 10 to 500 MHz 500 MHz to 3.6 GHz 3.6 to 26.5 GHz 26.4 to 44 GHz |
+4 dBm (nominal) +5 dBm (nominal) –15 dBm (nominal) –17 dBm (nominal) |
||||||||||||||||||||||||||||||||||||
RF preselector on, preamp off | 10 to 30 MHz 30 MHz to 1 GHz 1 to 1.5 GHz 1.5 to 3.6 GHz 3.5 to 8.4 GHz 8.3 to 13.6 GHz 13.5 to 26.5 GHz 26.4 to 44 GHz (Option 544) |
+12 dBm +12.5 dBm +12.5 dBm +14.5 dBm +15 dBm +15 dBm +10 dBm +10 dBm |
+16 dBm +15 dBm +14 dBm +16 dBm +18 dBm +18 dBm +14 dBm +13 dBm |
|||||||||||||||||||||||||||||||||||
RF preselector on, preamp on | 10 to 30 MHz 30 MHz to 1 GHz 1 to 2 GHz 2 to 3.6 GHz 3.6 to 26.5 GHz 26.4 to 44 GHz (Option 544) |
–9 dBm –9 dBm –4 dBm –6 dBm |
–5 dBm –4 dBm –2 dBm –3 dBm −15 dBm (nominal) −17 dBm (nominal) |
|||||||||||||||||||||||||||||||||||
Phase noise 2 | Offset | Specification | Typical | |||||||||||||||||||||||||||||||||||
Noise sidebands – (20 to 30 °C, CF = 1 GHz) |
10 Hz 100 Hz 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz |
— –91 dBc/Hz –113 dBc/Hz –116 dBc/Hz –135 dBc/Hz |
-80 dBc/Hz (nominal) –100 dBc/Hz –112 dBc/Hz (nominal) –114 dBc/Hz –117 dBc/Hz –136 dBc/Hz –148 dBc/Hz (nominal) |
|||||||||||||||||||||||||||||||||||
1. Preamp input power = input power-input attenuation (–9 dB for input 2). 2. For nominal values, refer to Figure 1. |
||||||||||||||||||||||||||||||||||||||
Nominal Phase Noise at Different Center Frequencies with RBW Selectivity Curves, Optimized Phase Noise, Versus Offset Frequency (For S/N prefix ≥ MY/SG/US 5526) -20 RBW=100 Hz -30 RBW=1 kHz -40 RBW=10 kHz -50 RBW=100 kHz -60 -70 CF=44 GHz* CF=25.2 GHz -80 -90 -100 -110 CF=10.2 GHz -120 CF=600 MHz -130 -140 -150 -160 -170 0.01 0.1 1 10 100 1000 10000 Freq (kHz) |
||||||||||||||||||||||||||||||||||||||
Figure 1. Nominal phase noise at different center frequencies. | ||||||||||||||||||||||||||||||||||||||
PowerSuite Measurement Specifications | ||||||||||||||||||||||||||||||||||||||
Channel power | ||||||||||||||||||||||||||||||||||||||
Amplitude accuracy, W-CDMA or IS95 (20 to 30 °C, attenuation = 10 dB) |
± 0.82 dB (± 0.23 dB 95th percentile) | |||||||||||||||||||||||||||||||||||||
Occupied bandwidth | ||||||||||||||||||||||||||||||||||||||
Frequency accuracy | ± [span/1000] (nominal) | |||||||||||||||||||||||||||||||||||||
Adjacent channel power | ||||||||||||||||||||||||||||||||||||||
Accuracy, W-CDMA (ACLR) | ||||||||||||||||||||||||||||||||||||||
(at specific mixer levels and ACLR ranges) | Adjacent | Alternate | ||||||||||||||||||||||||||||||||||||
– MS – BTS |
± 0.14 dB ± 0.49 dB |
± 0.21 dB ± 0.44 dB |
||||||||||||||||||||||||||||||||||||
Dynamic range (typical) – Without noise correction – With noise correction |
–73 dB –78 dB |
–79 dB –82 dB |
||||||||||||||||||||||||||||||||||||
Offset channel pairs measured | 1 to 6 | |||||||||||||||||||||||||||||||||||||
ACP measurement and transfer time (fast method) | 14 ms (nominal) (σ = 0.2 dB) | |||||||||||||||||||||||||||||||||||||
Multiple number of carriers measured | Up to 12 | |||||||||||||||||||||||||||||||||||||
Power statistics CCDF | ||||||||||||||||||||||||||||||||||||||
Histogram resolution | 0.01 dB | |||||||||||||||||||||||||||||||||||||
Harmonic distortion | ||||||||||||||||||||||||||||||||||||||
Maximum harmonic number | 10th | |||||||||||||||||||||||||||||||||||||
Result | Fundamental power (dBm), relative harmonics power (dBc), total harmonic distortion in % | |||||||||||||||||||||||||||||||||||||
Intermod (TOI) | Measure the third-order products and intercepts from two tones | |||||||||||||||||||||||||||||||||||||
Burst power | ||||||||||||||||||||||||||||||||||||||
Methods | Power above threshold, power within burst width | |||||||||||||||||||||||||||||||||||||
Results | Single burst output power, average output power, maximum power, minimum power within burst, burst width |
|||||||||||||||||||||||||||||||||||||
Spurious emission | ||||||||||||||||||||||||||||||||||||||
W-CDMA (1 to 3.6 GHz) table-driven spurious signals; search across regions – Dynamic range – Absolute sensitivity |
96.7 dB –85.4 dBm |
101.7 dB (typical) | ||||||||||||||||||||||||||||||||||||
Spectrum emission mask (SEM) | ||||||||||||||||||||||||||||||||||||||
cdma2000® (750 kHz offset) – Relative dynamic range (30 kHz RBW) – Absolute sensitivity – Relative accuracy |
78.9 dB –100.7 dBm ± 0.12 dB |
85 dB (typical) | ||||||||||||||||||||||||||||||||||||
3GPP W-CDMA (2.515 MHz offset) – Relative dynamic range (30 kHz RBW) – Absolute sensitivity – Relative accuracy |
81.9 dB –100.7 dBm ± 0.12 dB |
88.2 dB (typical) | ||||||||||||||||||||||||||||||||||||
General Specifications | ||||||||||||||||||||||||||||||||||||||
Temperature range | ||||||||||||||||||||||||||||||||||||||
Operating | 0 to 55 °C | |||||||||||||||||||||||||||||||||||||
Storage | –40 to 70 °C | |||||||||||||||||||||||||||||||||||||
EMC | ||||||||||||||||||||||||||||||||||||||
Complies with European EMC Directive 2004/108/EC – IEC/EN 61326-2-1 – CISPR Pub 11 Group 1, class B – AS/NZS CISPR 11 – ICES/NMB-001 |
||||||||||||||||||||||||||||||||||||||
This ISM device complies with Canadian ICES-001 | ||||||||||||||||||||||||||||||||||||||
Cet appareil ISM est conforme à la norme NMB-001 du Canada | ||||||||||||||||||||||||||||||||||||||
Radio disturbance measuring apparatus | ||||||||||||||||||||||||||||||||||||||
CISPR 16-1-1 | The features in this instrument comply with the performance requirements of this basic standard 1 | |||||||||||||||||||||||||||||||||||||
Safety | ||||||||||||||||||||||||||||||||||||||
Complies with European Low Voltage Directive 2006/95/EC – IEC/EN 61010-1 2nd Edition – Canada: CSA C22.2 No. 61010-01-04 – USA: UL 61010-1 2nd Edition |
||||||||||||||||||||||||||||||||||||||
Acoustic noise emission | Geraeuschemission | |||||||||||||||||||||||||||||||||||||
LpA < 70 dB | LpA < 70 dB | |||||||||||||||||||||||||||||||||||||
Operator position | Am Arbeitsplatz | |||||||||||||||||||||||||||||||||||||
Normal position | Normaler Betrieb | |||||||||||||||||||||||||||||||||||||
Per ISO 7779 | Nach DIN 45635 t.19 | |||||||||||||||||||||||||||||||||||||
Environmental stress | ||||||||||||||||||||||||||||||||||||||
Samples of this product have been type tested in accordance with the Keysight Environmental Test Manual and verified to be robust against the environmental stresses of storage, transportation, and end-use; those stresses include, but are not limited to, temperature, humidity, shock, vibration, altitude, and power line conditions; test methods are aligned with IEC 60068-2 and levels are similar to MIL-PRF-28800F Class 3 |
||||||||||||||||||||||||||||||||||||||
1. The use of Noise Floor Extension (NFE) is required to meet the “isolated pulse” test case in Bands B, C, and D. In addition, when making measurements in Band B below 160 kHz using time domain scans or making measurements using meters in monitor spectrum, NFE is also required to meet the 1 Hz pulse repetition frequency (prf) test case for the quasi-peak detector (QPD) and for the 5 Hz prf test case for the RMS-avg detector. | ||||||||||||||||||||||||||||||||||||||
Power requirements | ||||||||||||||||||||||||||||||||||||||
Voltage and frequency (nominal) | 100 to 120 V, 50/60/400 Hz 220 to 240 V, 50/60 Hz |
|||||||||||||||||||||||||||||||||||||
Power consumption – On – Standby |
450 W maximum 20 W |
|||||||||||||||||||||||||||||||||||||
Display | ||||||||||||||||||||||||||||||||||||||
Resolution | 1024 x 768, XGA | |||||||||||||||||||||||||||||||||||||
Size | 213 mm (8.4 in.) diagonal (nominal) | |||||||||||||||||||||||||||||||||||||
Data storage | ||||||||||||||||||||||||||||||||||||||
Internal | ≥ 80 GB (nominal) (removable solid state drive) | |||||||||||||||||||||||||||||||||||||
External | Supports USB 2.0 compatible memory devices | |||||||||||||||||||||||||||||||||||||
Weight (without options) | ||||||||||||||||||||||||||||||||||||||
Net | 24 kg (52 lbs) (nominal) | |||||||||||||||||||||||||||||||||||||
Shipping | 36 kg (79 lbs) (nominal) | |||||||||||||||||||||||||||||||||||||
Dimensions | ||||||||||||||||||||||||||||||||||||||
Height | 177 mm (7.0 in) | |||||||||||||||||||||||||||||||||||||
Width | 431 mm (17.0 in) | |||||||||||||||||||||||||||||||||||||
Length | 535 mm (21.0 in) | |||||||||||||||||||||||||||||||||||||
Calibration cycle | ||||||||||||||||||||||||||||||||||||||
The recommended calibration cycle is one year; calibration services are available through Keysight service centers | ||||||||||||||||||||||||||||||||||||||
Inputs and Outputs | ||||||||||||||||||||||||||||||||||||||
Front panel | ||||||||||||||||||||||||||||||||||||||
RF input – RF Input 1 Connector – RF Input 2 Connector |
Type-N female, 50 Ω (nominal) (standard) 3.5 mm male, 50 Ω (Opt C35) 2.4 mm male, 50 Ω (Option 544 only) Type-N female, 50 Ω (nominal) (standard) |
|||||||||||||||||||||||||||||||||||||
External Mixing (Option EXM) – Connection port – Connector – Impedance – Functions – Mixer bias range |
SMA, female 50 Ω, nominal Triplexed for LO output, IF input, and mixer bias ± 10 mA in 10 μA step |
|||||||||||||||||||||||||||||||||||||
– IF input center frequency – IF BW path <= 25 MHz – 85 MHz BW IF path – LO output frequency range |
322.5 MHz (note - please use the proper <= sign) 300 MHz 3.75 to 14.0 GHz |
|||||||||||||||||||||||||||||||||||||
Probe power – Voltage/current |
+15 Vdc, ± 7% at 150 mA max (nominal) –12.6 Vdc, ± 10% at 150 mA max (nominal) |
|||||||||||||||||||||||||||||||||||||
USB 2.0 ports – Host (2 ports) – Standard – Connector – Output current |
Compatible with USB 2.0 USB Type-A female 0.5 A (nominal) |
|||||||||||||||||||||||||||||||||||||
Headphone jack – Connector |
Miniature stereo audio jack 3.5 mm | |||||||||||||||||||||||||||||||||||||
Rear panel | ||||||||||||||||||||||||||||||||||||||
10 MHz out – Connector – Output amplitude – Frequency |
BNC female, 50 Ω (nominal) ≥ 0 dBm (nominal) 10 MHz × (1+ frequency reference accuracy) |
|||||||||||||||||||||||||||||||||||||
Ext Ref In – Connector – Input amplitude range – Input frequency – Frequency lock range |
BNC female, 50 Ω (nominal) –5 to 10 dBm (nominal) 1 to 50 MHz (nominal) ± 5 x 10–6 of specified external reference input frequency |
|||||||||||||||||||||||||||||||||||||
Trigger 1 and 2 inputs – Connector – Impedance – Trigger level range |
BNC female > 10 kΩ (nominal) –5 to 5 V |
|||||||||||||||||||||||||||||||||||||
Trigger 1 and 2 outputs – Connector – Impedance – Level |
BNC female 50 Ω (nominal) 0 to 5 V (CMOS) |
|||||||||||||||||||||||||||||||||||||
Rear panel (continued) | ||||||||||||||||||||||||||||||||||||||
Monitor output | ||||||||||||||||||||||||||||||||||||||
– Connector | VGA compatible, 15-pin mini D-SUB | |||||||||||||||||||||||||||||||||||||
– Format | XGA (60 Hz vertical sync rates, non-interlaced) Analog RGB | |||||||||||||||||||||||||||||||||||||
– Resolution | 1024 x 768 | |||||||||||||||||||||||||||||||||||||
Noise source drive +28 V (pulsed) – Connector |
BNC female | |||||||||||||||||||||||||||||||||||||
SNS Series noise source | For use with Keysight Technologies’ SNS series noise sources | |||||||||||||||||||||||||||||||||||||
Analog out – Connector |
BNC female (used by Option YAS) | |||||||||||||||||||||||||||||||||||||
USB 2.0 ports – Host (4 ports) – Standard – Connector – Output current – Device (1 port) – Standard – Connector |
Compatible with USB 2.0 USB Type-A female 0.5 A (nominal) |
|||||||||||||||||||||||||||||||||||||
Compatible with USB 2.0 USB Type-B female |
||||||||||||||||||||||||||||||||||||||
GPIB interface | ||||||||||||||||||||||||||||||||||||||
– Connector | IEEE-488 bus connector | |||||||||||||||||||||||||||||||||||||
– GPIB codes | SH1, AH1, T6, SR1, RL1, PP0, DC1, C1, C2, C3, C28, DT1, L4, C0 | |||||||||||||||||||||||||||||||||||||
– GPIB mode | Controller or device | |||||||||||||||||||||||||||||||||||||
LAN TCP/IP interface – Standard – Connector |
1000Base-T RJ45 Ethertwist |
|||||||||||||||||||||||||||||||||||||
Aux I/O connector – Connector |
25-pin D-SUB | |||||||||||||||||||||||||||||||||||||
I/Q Analyzer | ||||||||||||||||||||||||||||||||||||||
Resolution bandwidth (spectrum measurement) | ||||||||||||||||||||||||||||||||||||||
Range – Overall – Span = 1 MHz – Span = 10 kHz – Span = 100 Hz |
100 mHz to 3 MHz 50 Hz to 1 MHz 1 Hz to 10 kHz 100 mHz to 100 Hz |
|||||||||||||||||||||||||||||||||||||
Window shapes | ||||||||||||||||||||||||||||||||||||||
Flat top, Uniform, Hanning, Gaussian, Blackman, Blackman-Harris, Kaiser Bessel (K-B 70 dB, K-B 90 dB and K-B 110 dB) | ||||||||||||||||||||||||||||||||||||||
Analysis bandwidth | ||||||||||||||||||||||||||||||||||||||
Standard Option B25 Option B85 | 10 Hz to 10 MHz 10 Hz to 25 MHz 10 Hz to 85 MHz |
|||||||||||||||||||||||||||||||||||||
IF frequency response (standard 10 MHz IF path) | ||||||||||||||||||||||||||||||||||||||
IF frequency response (demodulation and FFT response relative to the center frequency, 20 to 30 °C) | ||||||||||||||||||||||||||||||||||||||
Center frequency (GHz) | Span (MHz) | Microwave preselector | Max. error | RMS (nominal) | ||||||||||||||||||||||||||||||||||
≤ 3.6 3.6 < f ≤ 26.5 f > 26.5 |
≤ 10 ≤ 10 ≤ 10 |
NA On On |
± 0.40 dB | 0.04 dB 0.25 dB 0.35 dB |
||||||||||||||||||||||||||||||||||
IF phase linearity (deviation from mean phase linearity, nominal) | ||||||||||||||||||||||||||||||||||||||
Center frequency (GHz) | Span (MHz) | Microwave preselector | Peak-to-peak (nominal) | RMS (nominal) |
||||||||||||||||||||||||||||||||||
0.02 < f ≤ 3.6 3.6 < f ≤ 26.5 |
≤ 10 ≤ 10 |
NA On |
0.4° 1.0° |
0.1° 0.2° (nom) |
||||||||||||||||||||||||||||||||||
Data acquisition (10 MHz IF path | ||||||||||||||||||||||||||||||||||||||
Time record length – IQ analyzer |
4,000,000 IQ sample pairs | |||||||||||||||||||||||||||||||||||||
Sample rate at ADC | 100 MSa/s | |||||||||||||||||||||||||||||||||||||
ADC resolution | 16 bits | |||||||||||||||||||||||||||||||||||||
) | ||||||||||||||||||||||||||||||||||||||
I/Q Analyzer — Option B25 25 MHz analysis bandwidth |
||||||||||||||||||||||||||||||||||||||
IF frequency response | ||||||||||||||||||||||||||||||||||||||
IF frequency response (demodulation and FFT response relative to the center frequency, 20 to 30 °C) | ||||||||||||||||||||||||||||||||||||||
Center frequency (GHz) | Span (MHz) | Microwave preselector | Max. error | RMS (nominal) | ||||||||||||||||||||||||||||||||||
≤ 3.6 3.6 < f ≤ 44 |
10 to ≤ 25 10 to ≤ 25 |
NA On |
± 0.45 dB | 0.051 dB 0.45 dB |
||||||||||||||||||||||||||||||||||
IF phase linearity (deviation from mean phase linearity, nominal) | ||||||||||||||||||||||||||||||||||||||
Center frequency (GHz) | Span (MHz) | Microwave preselector | Peak-to-peak (nominal) | RMS (nominal) | ||||||||||||||||||||||||||||||||||
0.02 ≤ f < 3.6 3.6 ≤ f ≤ 26.5 |
≤ 25 ≤ 25 |
NA On |
0.6° 4.5° |
0.14° 1.2° |
||||||||||||||||||||||||||||||||||
Data acquisition (25 MHz IF path) | ||||||||||||||||||||||||||||||||||||||
Time record length (IQ pairs) | ||||||||||||||||||||||||||||||||||||||
– IQ analyzer | 4,000,000 IQ sample pairs | |||||||||||||||||||||||||||||||||||||
– 89600 VSA software | Data packing | |||||||||||||||||||||||||||||||||||||
32-bit | 64-bit | Memory | ||||||||||||||||||||||||||||||||||||
536 MSa | 268 MSa | 2 GB | ||||||||||||||||||||||||||||||||||||
Sample rate at ADC | 100 MSa/s | |||||||||||||||||||||||||||||||||||||
ADC resolution | 16 bits |
Keysight N9038A-508 EMI Receiver Downloads
Videos
Custom Field
Frequency Range 3 Hz to 8.4 GHz
Standards Met CISPR16-1-1, ANSI-C63.2, MIL‑STD‑461 and FCC
Calibration Accredited ISO 17025
Options 508, B25, CNF