EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  Schwarzbeck FMZB 1512 Active Handheld RX Loop Antenna

  SKU: 30106

  Frequency Range: 9 kHz - 30 MHz

  Attenuator: 0 - 33 dB in 3 dB steps

  Frequency response: < ± 3 dB

  Connector: N - Type

  Applications: Antenna Pattern Measurement

  Test Standards: CISPR, MIL, FCC Part 15, ISO, ETSI

  Additional Test Standards: EN, ANSI

  Typically in Stock

  VIEW PRODUCT Cart

• 

  Schwarzbeck CDN AF8 Coupling Decoupling Network

  SKU: 11789

  Frequency Range: 0.1 - 230 MHz

  Common Mode Impedance: 150 kHz – 24 MHz: 150 Ω ±20 Ω; 24 MHz–80 MHz: 150Ω +60 Ω / -45 Ω; 80 MHz-230 MHz: 150 Ω ±60 Ω

  Max. RF Test Voltage: 30 V

  Max. RF Input Power: 6 W (continuous)

  RF Input Connector: 50 Ω BNC (female)

  Test Standards: IEC/EN 61000-4-6

  Associated Equipment: RF Conducted Immunity Test Systems

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Schwarzbeck HHS 5218 Helmholtz Coils

  SKU: 30121

  Number of Turns: 10

  Max. Coil Current: 20 A (5 minutes)

  Nominal Coil Current: 10 A (continuous)

  Coil Separation: 0.72 m

  Applications: Radiated Immunity

  Test Standards: EN/IEC 61000-4-8

  Inquire for Lead Time

  VIEW PRODUCT Cart

• 

  AE Techron DSR 100 Ripple Generator and AC/DC Voltage Source

  SKU: 11769

  Test Standards: ISO 7637-4, ISO 21498

  Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical Disturbances

  Frequency Range: DC - 300 kHz

  Output Current: up to 400 Amps

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Haefely PCD 100 Single Phase CDN For PSURGE 8000 Platform

  SKU: 6587

  Maximum Impulse Voltage: 7.5 kV

  Maximum AC Voltage: 240 vrms

  Maximum DC Voltage: 110 V

  Maximum AC and DC Current: 16 A

  EUT Connector: Schuko Socket

  Coupling Elements and Paths: Controlled by the PSURGE 8000

  Applications: EFT/Burst immunity testing, Conducted Immunity/Susceptibility Test Setup

  Test Standards: IEC 61000-4-5

  In Stock

  VIEW PRODUCT Cart

• 

  Schwarzbeck HHS 5201-98 Circular Helmholtz Coils

  SKU: 30138

  Number of Turns (per coil): 98

  Max. Coil Current: 40 A for 1 min.; 15 A for 15 min.

  Nominal Coil Current: 12 A continuous

  Coil Distance for DUT: 0 - 66 mm

  Coil Spacings Between Coil Centers: 29 - 95 mm

  Applications: Radiated Immunity

  Test Standards: MIL-STD-461

  Inquire for Lead Time

  VIEW PRODUCT Cart

• 

  Teseq NSG 4070C-110 RF Conducted Immunity System

  SKU: 11240

  Videos: Calibration Example, Remote Operation Setup

  Standards Met: IEC/EN 61000-4-6, ISO 11452-4

  Applications: RF Conducted Disturbances, Vehicle Component Disturbance Testing, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  Frequency Range: 10 kHz - 400 MHz

  Internal Amplifier: 110 Watts

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  IFI S41-300 0.8 – 4.2 GHz Solid State Power Amplifier

  SKU: 1069

  Weight: 220 lbs.

  Dimensions: (2X) 19 x 25 x 10.5 (W x D x H)

  Frequency range: 0.8 – 4.2 GHz

  Gain: 55 dB min.

  Mains (kVA): 2.5

  P1dB Power: 250 Watts Min.

  Rated Power: 300 Watts Min.

  1 Unit - Modified

  VIEW PRODUCT Cart

• 

  EM Test TSS 500M10 Telecom Surge Generator

  SKU: 11936

  Cost New:

  Was:

  $48,000.00

  Price Now:

  $14,400.00

  In Stock

• 

  Rohde & Schwarz ESRP3 EMI Test Receiver per CISPR 16-1-1

  SKU: 11695

  Frequency Range: 9 kHz to 3.6 GHz

  SSB Phase Noise: –90 dBc (1 Hz) (typ.)

  Frequency Response: 9 kHz ≤ f < 100 kHz < 4 dB

  Dynamic Range: RBW = 1 kHz, f > 10 MHz 110 dB

  Harmonics, nonharmonic spurious: output level = –10 dBm –30 dBc

  RF Output Connector: N female, 50 Ω

  Applications: Differences Between EMI Test Receivers and Spectrum Analyzers

  Test Standards: CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461 and FCC

  Inquire

  VIEW PRODUCT Cart

• 

  Solar 2854-2 Spike Generator for MIL-STD-461F CS106

  SKU: 22505

  Test Standards: MIL-STD-461 CS106

  Spike Amplitude: 10 V to over 400 V peak

  Internal Impedance: 2.0 Ω

  Typically in Stock

  VIEW PRODUCT Cart

• 

  EMC Partner IMU4000 FSDV Compliance Tester for Surge, EFT, Dips & Variations

  SKU: 10466

  Applications and Test Setups: Surge Immunity (Combo/Ring/Telecom Waves), EFT/Burst, Dips Interrupts & Variations

  Standards Met: IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11

  Rental Only

  VIEW PRODUCT Cart