EMC Test Equipment

(Showing 12 of 1210)
Show 12 24 36 48 96

EMC Test Equipment Categories

Transient Generators
Transient Generators
EMI Receivers/EMC Analyzers
EMI Receivers/EMC Analyzers
RF Power Amplifiers
RF Power Amplifiers
Electric Field Strength Measurement
Electric Field Strength Measurement
RF Conducted Immunity Test Systems
RF Conducted Immunity Test Systems
EMC Antennas
EMC Antennas
Line Impedance Stabilization Networks (LISN's)
Line Impedance Stabilization Networks (LISN's)
EMC Probes
EMC Probes
EM Coupling Clamps
EM Coupling Clamps
Coupling Decoupling Networks (CDN's)
Coupling Decoupling Networks (CDN's)
RF Current Probes/Monitors
RF Current Probes/Monitors
EMC/EMI Signal Generators
EMC/EMI Signal Generators
Calibration Equipment
Calibration Equipment
Software for EMC Testing
Software for EMC Testing

EMC Test Equipment Test Equipment, Systems & Solutions

  • Com-Power LIT-930A 9kHz to 30MHz Transient Limiter - The EMC Shop

    Com-Power LIT-930A 9kHz to 30MHz Transient Limiter

    SKU: 8409

    Connector: N type (input and output)
    Dimensions: L 4.3” (100 mm) W 2.0” (50 mm) H 1.5” (35 mm)
    Frequency Range: 9 kHz - 30 MHz
    Input: 4 Watts CW (+36 dBm) ±50 Vdc
    Insertion Loss: 10 dB +1.5 / -0.5 dB*
    VSWR: 1.1:1
    $650.00
    Typically In Stock
    ORDERING OPTIONS
  • Amplifier Research FI7000 Probe Interface

    Amplifier Research FI7000 Probe Interface

    SKU: sku-438

    Weight: without enclosure 2.5 kg (6.25 lb) with enclosure 7.25 kg (16 lb)
    Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.
    Communication: IEEE-488 (GPIB) USB 2.0, Test and Measurement class RS-232 (19200 Baud) Fiber Optic Serial (19200 Baud) reserved for connection to FM7004A Field Monitor Laser Fiber Optic Serial reserved for connection to one FL/PL 7000 series probe
    Dimensions: without enclosure 48.3 x 4.5 x 25.4 cm (19.0 x 1.75 x 10.0 in) with enclosure 49.8 x 12.7 x 30.5 cm (19.6 x 5.0 x 12.0 in)
    RF Connector: (2) E2000 compact duplex female for probe communication and safety fiber loop (2) FSMA for fiber connection to FM7004A
    Standards Met: IEC/EN 61000-4-3
    Supply Voltage: 90-260 VAC, 50-60 Hz
    VIEW PRODUCT Cart
  • Amplifier Research 200T4G8 200 Watt Amplifier, 4 - 8 GHz

    Amplifier Research 200T4G8 200 Watt Amplifier, 4 - 8 GHz

    SKU: sku-436

    Flatness: ±6 dB maximum at rated power
    Frequency Range: 4-8 GHz instantaneously
    Gain: Max Range: 53 dB; Continous Range: 35 dB
    Impedance: 50 ohms, VSWR 2.0:1 maximum
    Output: Nominal: 262 watts Minimum: 200 watts Linear @ 1 dB Compression: 100 watts minimum
    RF Connector: Type N female
    RF Input Voltage: 1.0 milliwatt maximum for rated output
    VIEW PRODUCT
  • Com-Power CGC-510E Comb Generator 100 kHz - 400 MHz

    Com-Power CGC-510E Comb Generator 100 kHz - 400 MHz

    SKU: sku-432

    Weight: 1 lbs / 0.5 kg
    AC Power Adapter: 6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 Hz
    Application/Test Type: Reference Signal Source for LISN verification
    Battery: 6V NiMH, 1 Ah
    Dimensions: 5 x 2.2 x 2.2 inches / 13.2 x 5.9 x 5.9 cm
    Frequency Range: 100 kHz to 400 MHz in 100 kHz or 500 kHz
    Mains & EUT Connections: LISN Interface Plug NEMA 15-P type
    Operation Time: 18 Hours Typical With Fully Charged Battery
    VIEW PRODUCT Cart
  • Com-Power CGO-51000 Comb Generator 1 GHz - 40 GHz 1 GHz steps

    Com-Power CGO-51000 Comb Generator 1 GHz - 40 GHz 1 GHz steps

    SKU: 43011

    Weight: 2.5 lbs (1.1 kg)
    AC Power Adapter: 6 VDC 500 mA
    Antennas: Integral Stub-type (w/protective cover)
    Application/Test Type: Radiated Reference Signal Source (for OATS, SAC, FAC, etc.)
    Battery: 6V NiMH, 1 Ah
    Dimensions: 7 in. x 1 in. (17.8 cm x 2.5 cm)
    Frequency Range: 1 GHz to 40 GHz in 1 GHz steps
    Operation Time: 18 Hours Typical With Fully Charged Battery
    Polarity: Vertical, Horizontal
    Inquire for Availability
    VIEW PRODUCT Cart
  • Com-Power CGO-520 Comb Generator 20 MHz - 4.5 GHz 20 MHz steps

    Com-Power CGO-520 Comb Generator 20 MHz - 4.5 GHz 20 MHz steps

    SKU: sku-428

    Weight: 2 lbs. / 0.9 kg
    AC Power Adapter: 6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 Hz
    Antennas: 2 and 12 inch Monopole
    Application/Test Type: EMI Radiated Site Reference Source
    Battery: 6V NiMH, 1 Ah
    Dimensions: 7 x 0.75 inches / 17.7 x 1.9 cm
    Frequency Range: 20 MHz - 4.5 GHz in 20 MHz steps
    Operation Time: 18 Hours Typical With Fully Charged Battery
    Polarity: Vertical and Horizontal
    VIEW PRODUCT Cart
  • Com-Power CGO-515 Comb Generator 1 MHz - 1.5 GHz 1 and 5 MHz Steps with Circular Base

    Com-Power CGO-515 Comb Generator 1 MHz - 1.5 GHz 1 and 5 MHz Steps with Circular Base

    SKU: sku-427

    Weight: 1 lbs. / 0.48 kg
    AC Power Adapter: 6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 Hz
    Antennas: 3 and 12 inch Monopole
    Application/Test Type: EMI Radiated Site Reference Source
    Battery: 6V NiMH, 1 Ah
    Dimensions: 3 x 3 x 3 inches / 7.6 x 7.6 x 7.6 cm
    Frequency Range: 1 MHz to 1.5 GHz in 1 MHz and 5 MHz step sizes
    Operation Time: 18 Hours Typical With Fully Charged Battery
    Polarity: Vertical and Horizontal
    VIEW PRODUCT Cart
  • Com-Power CG-515 Comb Generator 1 MHz - 1.5 GHz 1 and 5 MHz Steps with Square Base

    Com-Power CG-515 Comb Generator 1 MHz - 1.5 GHz 1 and 5 MHz Steps with Square Base

    SKU: sku-423

    Weight: 1 lbs. / 0.48 kg
    AC Power Adapter: 6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 Hz
    Antennas: 3 and 12 inch Monopole
    Application/Test Type: EMI Radiated Site Reference Source
    Battery: 6V NiMH, 1 Ah
    Dimensions: 3 x 3 x 3 inches / 7.6 x 7.6 x 7.6 cm
    Frequency Range: 1 MHz to 1.5 GHz in 1 MHz and 5 MHz step sizes
    Operation Time: 18 Hours Typical With Fully Charged Battery
    Polarity: Vertical and Horizontal
    VIEW PRODUCT Cart