EMC/EMI Test & Measurement Equipment - The EMC Shop

EMC Test Equipment Categories

Transient Generators

EMI Receivers/EMC Analyzers

RF Power Amplifiers

Electric Field Strength Measurement

RF Conducted Immunity Test Systems

EMC Antennas

Line Impedance Stabilization Networks (LISN's)

EMC Probes

EM Coupling Clamps

Coupling Decoupling Networks (CDN's)

RF Current Probes/Monitors

EMC/EMI Signal Generators

Calibration Equipment

Software for EMC Testing

EMC Test Equipment Test Equipment, Systems & Solutions

3ctest PFS 2216SVD Single Phase Power Fail Simulator w/ Two Semiconductor Switches for High Current Protection

SKU: sku-591

Weight: 40Kg

Communication: Ethernet LAN、RJ45

Coupling: BNC

Dimensions: 19 inch/6U

Dips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29

Frequency: 45-65Hz

General Data: Technical Details

Input: BNC,5V TTL

Mains & EUT Connections: 4mm banana line

Maximum Continuous Power: 100W

Output Current: 16A AC/DC continuous current; 20A continuous 5s 40Acontinuous 3s

Peak inrush current capability: 500 Amps

Phase synchronization: 0°- 360°，1° step or random

Repetition time: 0.3-9999 cycle or 5ms-9999ms

Rise time: 1-5us（100Ω load）

Supply Voltage: 110V/220V, ±10%, 50/60Hz

Test duration: 50ms-50000ms

Test Voltage: 250V AC，300V DC

Trigger: BNC,5V TTL

VIEW PRODUCT Cart
3ctest PFS 2216SD Power Fail Simulator for EN/IEC 61000-4-11

SKU: sku-590

Test Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29

Mains & EUT Connections: 4mm banana line

Output Current: 16A AC/DC continuous current; 20A continuous 5s 40Acontinuous 3s

Peak inrush current capability: 500 Amps

Applications: EMC Precompliance Testing, Conducted Immunity

Rise time: 1-5us（100Ω load）

Test duration: 50ms-50000ms

Test Voltage: 250V AC，300V DC

Trigger: BNC,5V TTL

Inquire for Availability

VIEW PRODUCT Cart
3ctest PFS 6030A Power Failure Simulator for Voltage Dips & Drops，60 V / 30 A

SKU: sku-588

Test voltage: Voltage drop: 1V max@30A

Weight: 20 kg

Dimensions: 19" / 4 U

Output: DUT voltage monitoring output: BNC，10:1 coaxial terminal output DUT current monitoring output: BNC，10A:1V coaxial terminal output

Peak current: 60A duration time 500 ms

Pulse duration: Drop duration time td 1us - 10 s

Repetition rate: 100 ms - 999s

Source Impedance: High resistance or low resistance

Test Voltage: 0–60 V

Trigger: External trigger signal by oscilloscope, BNC,5V TTL

Trigger of bursts: Automatic, manual, external

VIEW PRODUCT Cart
3ctest EFT 500T Burst/EFT Simulator w/ Three Phase CDN

SKU: 4559

Applications: Conducted Immunity Testing, EMC on Medical Devices, CE Marking

Standards Met: IEC 61000-4-4,IEC 61326,EN 61000-6-1,IEC 61850-3,EN 61000-6-2

Built-in three phase CDN: AC 380V/16A; DC-1 220V/16A

Output Voltage Range: 0.25 to 4.8kV

Condition of Used (Scale 5 - 10): 8

Pre Programmed Test Routines: Yes

Cost New:

Was:

Price Now:

$1,395.00 - $17,250.00

In Stock

ORDERING OPTIONS
Com-Power ISN Calibration Kit for ISN and LCL Adapters

SKU: sku-580

VIEW PRODUCT Cart
AH Systems SAS-545 1 GHz Biconical Antenna

SKU: sku-573

Weight: 1.6 lb.'s (725 g)

Antennas: Biconical Antennas

Application/Test Type: Radiated emissions and immunity

Connector: N-type (female)

Dimensions: Height: 15 in. (38.1 cm) Width: 14 1/4 in. (36.25 cm) Depth: 7 11/16 in. (19.5 cm)

Frequency Range: 30 MHz - 1GHz

Gain: -50 to 2.5 dBi

Impedance: 50 Ohms nominal

Maximum Continuous Power: 200 Watt

Mounting Base: ABC-B Mounting Clamp with ¼ - 20 Thread, female

VIEW PRODUCT
Teseq AMZ 41A Absorbing Clamp for CISPR 13 & 14, w/ LE 210 RF Cable

SKU: 30080

Weight: approx. 7 kg

Application/Test Type: Disturbance power measurements of coaxial cables, automotive screened components (eg motor ignition systems and sheath current on aerial cables.

Clamp factor (CF): -4 dB to +5 dB

Current Rating: 25 Amps Max

Decoupling factor DF: Greater than 21 dB

Decoupling factor DR: Greater than 30 dB

Dimensions: W x D x H: 665 mm x 120 mm x 105 mm

Frequency Range: 30 MHz to 1000 MHz

Isolated lines under test: Power supply lines and other connecting lines

Max. Cable Diameter: 20 mm inner (10 mm with adapter)

Maximum Continuous Power: 10 Watts

Min. site attenuation: 13 dB to 22 dB

RF Connector: BNC, 50 Ω

Standards Met: CISPR 13, CISPR 14-1, CISPR 16-1-5, CISPR 16-2-2

Inquire for Lead Time

VIEW PRODUCT Cart
3ctest D1550 Stripline for ISO 11452-5 Road Vehicles, 50Ω

SKU: sku-562

Connector type: N 50 Ω

Dimensions: 4.30 x 1.5x 1.05 m, .95 m table height

Distance between the plates: 150 mm

Frequency range: 0 GHz - 1 GHz

Max. input power: 1000 W

Standards Met: ISO 11452-5

Stripline: Conform with ISO 11452-5

Typical impedance: 50 Ω

Typical VSWR (30 - 1000 MHz): Better than 1.22

VIEW PRODUCT Cart
Teseq MDS 21B EMC Absorbing Clamp for Disturbance Power Measuring, w/ 6 dB Attenuator & RF Cable

SKU: sku-559

Weight: approx. 6.3 kg

Current Rating: 30 A

Dimensions: 610 mm x 115 mm x 80 mm

Frequency Range: 30 MHz to 1000 MHz

Impedance: 50 Ω

RF Connector: N, female

VIEW PRODUCT Cart
EM Test PFS 503N32 Power Fail Simulator, 3-phase 3x480V AC (p-p) max. 32A

SKU: sku-549

Weight: app. 28kg;

Current Rating: Max. 32A

Dimensions: 19"/6 HU

Dips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29

Frequency: 50Hz/60Hz, Single phase application

Output: 3-phase application L1, L2, L3, N and PE on the rear panel. 1-phase application L, N and PE on the front panel

Peak current: Better than 500A

Repetition rate: 0.01s to 9,999s

Rise time: Between 1us and 5us for abrupt changes, generator loaded with resistive load

Supply Voltage: 115V/230V; +10/-15%

Test Voltage: 3x480V AC resp. 3x690V AC (L-L) 277V AC resp. 400V AC 360V DC resp. 600V DC (L-N)

Trigger of bursts: Automatic

VIEW PRODUCT Cart
Haefely PIM 110 Ring Wave Generator

SKU: 10544

Impedance: 12, 30 & 200 Ohms

Applications: Surge Immunity Testing

Ring Wave: 0.5us - 100kHz (voltage & current)

Pulse repetition: 12 per minute

Pulse Voltage: 0.20 – 7.8kV

Compliance Standards: IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Test duration: 5 seconds

Test Equipment Group: Ring Wave Generators/Simulators

Cost New:

Was:

Price Now:

$995.00 - $1,795.00

In Stock

ORDERING OPTIONS
Amplifier Research 40AD1 DC - 1MHz RF Power Amplifier

SKU: 4272

Output Power: ~50 Watts

Frequency Range: DC - 1 MHz

Applications: Radiated Immunity

Max. Gain: 45 dB minimum

Input for Rated Output: 1.0 milliwatt maximum

Input Impedance: 50Ω; VSWR 1.5:1 maximum

Output Impedance: 50Ω; VSWR 2.0:1 maximum

Inquire for Availability

VIEW PRODUCT Cart