EMC Test Equipment

(Showing 12 of 1205)
Show 12 24 36 48 96

EMC Test Equipment Categories

Transient Generators
Transient Generators
EMI Receivers/EMC Analyzers
EMI Receivers/EMC Analyzers
RF Power Amplifiers
RF Power Amplifiers
Electric Field Strength Measurement
Electric Field Strength Measurement
RF Conducted Immunity Test Systems
RF Conducted Immunity Test Systems
EMC Antennas
EMC Antennas
Line Impedance Stabilization Networks (LISN's)
Line Impedance Stabilization Networks (LISN's)
EMC Probes
EMC Probes
EM Coupling Clamps
EM Coupling Clamps
Coupling Decoupling Networks (CDN's)
Coupling Decoupling Networks (CDN's)
RF Current Probes/Monitors
RF Current Probes/Monitors
EMC/EMI Signal Generators
EMC/EMI Signal Generators
Calibration Equipment
Calibration Equipment
Software for EMC Testing
Software for EMC Testing

EMC Test Equipment Test Equipment, Systems & Solutions

  • Com-Power LI-3P-216 LISN, 9 kHz to 30 MHz, 50/250 uH, 500 VAC - The EMC Shop

    Com-Power LI-3P-216 LISN, 9 kHz to 30 MHz, 50/250 uH, 500 VAC

    SKU: 11665

    Weight: 27.5 lbs.
    Application/Test Type: Power Line Conducted Emissions Tests
    Current Rating: 16 Amperes
    Dimensions: 19.3” x 13.9” x 2.3"
    Frequency Range: 9 kHz to 30 MHz
    Inductors: 50 µH
    Insertion loss: less than 0.7 dB
    Isolation: more than 40 dB
    Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack
    RF Connector: RF Measurement Port 50Ω - N-Type (female)
    Standards Met: ANSI C63.4, CISPR 16-1-2
    Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V
    $5,795.00
    SHIPS IN 3-5 DAYS
    ORDERING OPTIONS
  • Amplifier Research FP7060 E-Field Probe Kit, 27 MHz – 60GHz, 0.7–300 V/m

    Amplifier Research FP7060 E-Field Probe Kit, 27 MHz – 60GHz, 0.7–300 V/m

    SKU: 11650

    Weight: 350g approx
    Application/Test Type: electric field measurement instrument for use in EMC and EMI applications
    Battery: 2 built-in NiMH batteries, size AA, rechargeable, changed by operator, 40 hours operating life per charge.
    Communication: 10 m glass cable
    Dimensions: Approx. 420 x 85 x 65 mm including base and probe
    Frequency Range: 27MHz–60GHz
    Measurement Mode: composite values
    Operation Time: 40 hours operating life per charge.
    Recharging Time: Standard recharger included, 3 hour charge time
    RF Field Probes: E-Field
    Sampling Rate: 60Hz, 50Hz, 5 Hz. - user selectable
    Sensors: Isotropic
    VIEW PRODUCT Cart
  • Amplifier Research 20S1G4 Solid State RF Amplifier

    Amplifier Research 20S1G4 Solid State RF Amplifier

    SKU: sku-610

    Weight: 37 lbs
    Dimensions: 19.8 x 6.1 x 14.8 in
    Flatness: ± 1.5 dB
    Frequency Range: 0.7–4.2GHz instantaneously
    Gain: (at maximum setting) 43 dB minimum (Continuous Range) 10 dB minimum
    Harmonic Distortion (THD): Minus 20 dBc maximum at 15 watts
    Impedance: 50 ohms, VSWR 2.0:1 maximum
    Input: 90-132, 180-264 VAC 50/60 Hz, single phase 210 watts maximum
    Output: POWER OUTPUT @ 3dB COMPRESSION Nominal 25 watts Minimum 20 watts POWER OUTPUT @ 1dB COMPRESSION Nominal 22 watts Minimum 18 watts
    RF Connector: RF Connector Type N female REMOTE INTERFACES: IEEE-488-24 pin female RS-232-9 pin Subminiature D (female) RS-232 (fiber optic)-Type ST USB 2.0-Type B Ethernet-RJ-45
    RF Input Voltage: 1.0 milliwatt maximum for rated output
    Standards Met: CE Mark Testing
    Call for availability
    VIEW PRODUCT Cart
  • 3ctest MFS Series Magnetic Field Simulator for IEC 61000-4-8

    3ctest MFS Series Magnetic Field Simulator for IEC 61000-4-8

    SKU: sku-594

    Weight: Approx. 35Kg+68Kg
    Coil Factor: 1000 x 1000mm
    CRO Trigger: Automatic, manual or external signal trigger
    Dimensions: 19 inch/6U/4U
    Magnetic Field Strength: varies per coil: TCXS111 single turn1m*1m square coil: 1-100A/m continuous, 100-400A/m(1-10 short time) TCXS113three-turn 1m*1m square coil: 1-300A/m continuous, 300-1200A/m 1~10s short time
    Max input power: 100W
    Output Current: 50Hz/60Hz sine wave +/- 5%
    Repetition time: 1-9999s
    Standards Met: IEC/EN 61000-4-8, GB/T 17626.8
    Test duration: 1-28800s
    Generic Standards: IEC 61000-6-1, IEC 61000-6-2
    6-8 Weeks
    VIEW PRODUCT Cart
  • 3ctest PFS 2216SVD Single Phase Power Fail Simulator w/ Two Semiconductor Switches for High Current Protection

    3ctest PFS 2216SVD Single Phase Power Fail Simulator w/ Two Semiconductor Switches for High Current Protection

    SKU: sku-591

    Weight: 40Kg
    Communication: Ethernet LAN、RJ45
    Coupling: BNC
    Dimensions: 19 inch/6U
    Dips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29
    Frequency: 45-65Hz
    General Data: Technical Details
    Input: BNC,5V TTL
    Mains & EUT Connections: 4mm banana line
    Maximum Continuous Power: 100W
    Output Current: 16A AC/DC continuous current; 20A continuous 5s 40Acontinuous 3s
    Peak inrush current capability: 500 Amps
    Phase synchronization: 0°- 360°，1° step or random
    Repetition time: 0.3-9999 cycle or 5ms-9999ms
    Rise time: 1-5us（100Ω load）
    Supply Voltage: 110V/220V, ±10%, 50/60Hz
    Test duration: 50ms-50000ms
    Test Voltage: 250V AC，300V DC
    Trigger: BNC,5V TTL
    VIEW PRODUCT Cart
  • 3ctest PFS 2216SD Power Fail Simulator for EN/IEC 61000-4-11

    3ctest PFS 2216SD Power Fail Simulator for EN/IEC 61000-4-11

    SKU: sku-590

    Mains & EUT Connections: 4mm banana line
    Output Current: 16A AC/DC continuous current; 20A continuous 5s 40Acontinuous 3s
    Peak inrush current capability: 500 Amps
    Rise time: 1-5us（100Ω load）
    Test duration: 50ms-50000ms
    Test Voltage: 250V AC，300V DC
    Trigger: BNC,5V TTL
    Inquire for Availability
    VIEW PRODUCT Cart
  • 3ctest PFS 6030A Power Failure Simulator for Voltage Dips & Drops，60 V / 30 A

    3ctest PFS 6030A Power Failure Simulator for Voltage Dips & Drops，60 V / 30 A

    SKU: sku-588

    Test voltage: Voltage drop: 1V max@30A
    Weight: 20 kg
    Dimensions: 19" / 4 U
    Output: DUT voltage monitoring output: BNC，10:1 coaxial terminal output DUT current monitoring output: BNC，10A:1V coaxial terminal output
    Peak current: 60A duration time 500 ms
    Pulse duration: Drop duration time td 1us - 10 s
    Repetition rate: 100 ms - 999s
    Source Impedance: High resistance or low resistance
    Test Voltage: 0–60 V
    Trigger: External trigger signal by oscilloscope, BNC,5V TTL
    Trigger of bursts: Automatic, manual, external
    VIEW PRODUCT Cart
  • Amplifier Research (AR) 40WD1000, DC - 1000 MHz RF Power Amplifier, 40 Watt CW

    Amplifier Research (AR) 40WD1000, DC - 1000 MHz RF Power Amplifier, 40 Watt CW

    SKU: sku-587

    Weight: 64 lb
    Communication: Remote control: 25 Pin Subminiature D on rear panel
    Dimensions: 19.8 x 9.8 x 18.0 in
    Flatness: ±1.0 dB typical ±1.5 dB maximum
    Frequency Range: DC-1000 MHz
    Gain: 47 dB minimum
    Impedance: INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum OUTPUT IMPEDANCE: 50 ohms, nominal
    Input: 90 to 132; 180 to 264 VAC 50/60 Hz, single phase 700 watts maximum
    Output: 40 watts minimum
    RF Connector: Type N female on front panel
    RF Input Voltage: 1.0 milliwatt maximum for rated output
    VIEW PRODUCT Cart