EMC/EMI Test & Measurement Equipment - The EMC Shop

EMC Test Equipment Categories

Transient Generators

EMI Receivers/EMC Analyzers

RF Power Amplifiers

Electric Field Strength Measurement

RF Conducted Immunity Test Systems

EMC Antennas

Line Impedance Stabilization Networks (LISN's)

EMC Probes

EM Coupling Clamps

Coupling Decoupling Networks (CDN's)

RF Current Probes/Monitors

EMC/EMI Signal Generators

Calibration Equipment

Software for EMC Testing

EMC Test Equipment Test Equipment, Systems & Solutions

Amplifier Research 100A400A 10 kHz - 400 MHz, 100 Watt RF Amplifier

SKU: 10704

Flatness: FLATNESS: ±1.0 dB typical, ±1.5 dB maximum

Frequency Range: 10kHz–400MHz

Gain: 50 dB

Application: BCI Testing

Input: 100-240 VAC, 50/60Hz, 500 watts

Output: 125 watts, Minimum: 100 watts

RF Input Voltage: 1.0 milliwatt maximum for rated output

Typically In Stock

VIEW PRODUCT Cart
Rent RF Conducted Immunity Test System per IEC 61000-4-6

SKU: 0699

Test Capabilities: RF Conducted Immunity

Standards Met: IEC/EN 61000-4-6

Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

CDN Test Levels (w/ built-in amplifier): 100Vrms

BCI Test Levels (w/ built-in amplifier): 30V

Frequency Range (w/ built-in amplifier): 9 kHz - 1 GHz

Applications: CE Marking, EMC Precompliance Testing

IN STOCK

VIEW PRODUCT Cart
FCC F-120-9A Bulk Current Injection Probe

SKU: 8567

Test Standards: IEC 61000-4-6

Frequency Range: 10 kHz - 230 MHz

Maximum Input Power: 125 Watts

Aperture: 1.57"

Applications: Bulk Current Injection BCI Testing, RF Conducted Immunity Testing

Cost New:

Was:

Price Now:

$595.00 - $1,195.00

In Stock

ORDERING OPTIONS
R&S EMC32 Automated Software for EMC Test and System Integration

SKU: sku-688

VIEW PRODUCT Cart
AH Systems SAS-540 Biconical Antenna, 20 MHz to 330 MHz, up to 2 V/m

SKU: sku-674

Weight: 3.8 lb.'s (1.72 kg)

Antennas: Biconical Antennas

Application/Test Type: Radiated emissions and immunity

Connector: N-type (female)

Dimensions: Height: 29 in. (73.7 cm) Width: 52.5 in. (133.4 cm)

Frequency Range: 20 MHz - 330 MHz

Gain: -22 to 2.8 dBi

Impedance: 50 Ohms nominal

Maximum Continuous Power: 1 Watts

Mounting Base: ABC-B (included)

VSWR: 2.0:1

VIEW PRODUCT Cart
Teseq FT 801 Ferrit Tube EM Decoupling Clamp, 150 kHz to 1 GHz, 35 mm Cable Diameter

SKU: sku-673

Weight: approx. 8 kg

Application/Test Type: decoupling network (ferrite tube) for immunity test according to IEC / EN 61000-4-6

Dimensions: 670 mm x 70 mm x 80 mm

Frequency Range: 150 kHz to 1000 MHz

Max. Cable Diameter: 35 mm

Standards Met: IEC/EN 61000-4-6 CISPR 24 EN 61000-6-1 EN 61000-6-2 IEC 60533 IEC 60601-1-2 IEC 61326

VIEW PRODUCT Cart
Com-Power LI-3P-216 LISN, 9 kHz to 30 MHz, 50/250 uH, 500 VAC

SKU: 11665

Weight: 27.5 lbs.

Application/Test Type: Power Line Conducted Emissions Tests

Current Rating: 16 Amperes

Dimensions: 19.3” x 13.9” x 2.3"

Frequency Range: 9 kHz to 30 MHz

Inductors: 50 µH

Insertion loss: less than 0.7 dB

Isolation: more than 40 dB

Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

RF Connector: RF Measurement Port 50Ω - N-Type (female)

Standards Met: ANSI C63.4, CISPR 16-1-2

Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

Cost New:

Was:

Price Now:

$5,795.00

SHIPS IN 3-5 DAYS

ORDERING OPTIONS
Empower Model 2175 RF Amplifier High Power CW, Modulated, & Pulse, 80 – 1000 MHz, 500 Watts

SKU: 10654

Weight: 68 LBs

Dimensions: 17.5 x 5.25 x 22

Frequency Range: 80 – 1000 MHz

Gain: 60 dB min

Impedance: 50 ohms nominal

RF Connector: Type N female

VIEW PRODUCT Cart
Amplifier Research FP7060 E-Field Probe Kit, 27 MHz – 60GHz, 0.7–300 V/m

SKU: 11650

Weight: 350g approx

Application/Test Type: electric field measurement instrument for use in EMC and EMI applications

Battery: 2 built-in NiMH batteries, size AA, rechargeable, changed by operator, 40 hours operating life per charge.

Communication: 10 m glass cable

Dimensions: Approx. 420 x 85 x 65 mm including base and probe

Frequency Range: 27MHz–60GHz

Measurement Mode: composite values

Operation Time: 40 hours operating life per charge.

Recharging Time: Standard recharger included, 3 hour charge time

RF Field Probes: E-Field

Sampling Rate: 60Hz, 50Hz, 5 Hz. - user selectable

Sensors: Isotropic

VIEW PRODUCT Cart
Amplifier Research 20S1G4 Solid State RF Amplifier

SKU: sku-610

Weight: 37 lbs

Dimensions: 19.8 x 6.1 x 14.8 in

Flatness: ± 1.5 dB

Frequency Range: 0.7–4.2GHz instantaneously

Gain: (at maximum setting) 43 dB minimum (Continuous Range) 10 dB minimum

Harmonic Distortion (THD): Minus 20 dBc maximum at 15 watts

Impedance: 50 ohms, VSWR 2.0:1 maximum

Input: 90-132, 180-264 VAC 50/60 Hz, single phase 210 watts maximum

Output: POWER OUTPUT @ 3dB COMPRESSION Nominal 25 watts Minimum 20 watts POWER OUTPUT @ 1dB COMPRESSION Nominal 22 watts Minimum 18 watts

RF Connector: RF Connector Type N female REMOTE INTERFACES: IEEE-488-24 pin female RS-232-9 pin Subminiature D (female) RS-232 (fiber optic)-Type ST USB 2.0-Type B Ethernet-RJ-45

RF Input Voltage: 1.0 milliwatt maximum for rated output

Standards Met: CE Mark Testing

Call for availability

VIEW PRODUCT Cart
3ctest MFS Series Magnetic Field Simulator for IEC 61000-4-8

SKU: sku-594

Weight: Approx. 35Kg+68Kg

Coil Factor: 1000 x 1000mm

CRO Trigger: Automatic, manual or external signal trigger

Dimensions: 19 inch/6U/4U

Magnetic Field Strength: varies per coil: TCXS111 single turn1m*1m square coil: 1-100A/m continuous, 100-400A/m(1-10 short time) TCXS113three-turn 1m*1m square coil: 1-300A/m continuous, 300-1200A/m 1~10s short time

Max input power: 100W

Output Current: 50Hz/60Hz sine wave +/- 5%

Repetition time: 1-9999s

Standards Met: IEC/EN 61000-4-8, GB/T 17626.8

Test duration: 1-28800s

Generic Standards: IEC 61000-6-1, IEC 61000-6-2

6-8 Weeks

VIEW PRODUCT Cart
3ctest PFS 2216SVD Single Phase Power Fail Simulator w/ Two Semiconductor Switches for High Current Protection

SKU: sku-591

Weight: 40Kg

Communication: Ethernet LAN、RJ45

Coupling: BNC

Dimensions: 19 inch/6U

Dips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29

Frequency: 45-65Hz

General Data: Technical Details

Input: BNC,5V TTL

Mains & EUT Connections: 4mm banana line

Maximum Continuous Power: 100W

Output Current: 16A AC/DC continuous current; 20A continuous 5s 40Acontinuous 3s

Peak inrush current capability: 500 Amps

Phase synchronization: 0°- 360°，1° step or random

Repetition time: 0.3-9999 cycle or 5ms-9999ms

Rise time: 1-5us（100Ω load）

Supply Voltage: 110V/220V, ±10%, 50/60Hz

Test duration: 50ms-50000ms

Test Voltage: 250V AC，300V DC

Trigger: BNC,5V TTL

VIEW PRODUCT Cart