EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  3ctest TPS-CS115 Fast Square Wave Pulse Generator for MIL-STD CS115

  SKU: 9397

  Standards Met: MIL-STD-461 CS115

  Burst Duration: pulse width: more than 30 ns

  Pulse amplitude: 0 - 2kV

  Repetition rate: 1 - 50 Hz

  Supply Voltage: 220 V, 50-60 Hz

  In Stock

  VIEW PRODUCT Cart

• 

  Amplifier Research 20S1G4 Solid State RF Amplifier

  SKU: sku-610

  Weight: 37 lbs

  Dimensions: 19.8 x 6.1 x 14.8 in

  Flatness: ± 1.5 dB

  Frequency Range: 0.7–4.2GHz instantaneously

  Gain: (at maximum setting) 43 dB minimum (Continuous Range) 10 dB minimum

  Harmonic Distortion (THD): Minus 20 dBc maximum at 15 watts

  Impedance: 50 ohms, VSWR 2.0:1 maximum

  Input: 90-132, 180-264 VAC 50/60 Hz, single phase 210 watts maximum

  Output: POWER OUTPUT @ 3dB COMPRESSION Nominal 25 watts Minimum 20 watts POWER OUTPUT @ 1dB COMPRESSION Nominal 22 watts Minimum 18 watts

  RF Connector: RF Connector Type N female REMOTE INTERFACES: IEEE-488-24 pin female RS-232-9 pin Subminiature D (female) RS-232 (fiber optic)-Type ST USB 2.0-Type B Ethernet-RJ-45

  RF Input Voltage: 1.0 milliwatt maximum for rated output

  Standards Met: CE Mark Testing

  Call for availability

  VIEW PRODUCT Cart

• 

  3ctest MFS Series Magnetic Field Simulator for IEC 61000-4-8

  SKU: sku-594

  Weight: Approx. 35Kg+68Kg

  Coil Factor: 1000 x 1000mm

  CRO Trigger: Automatic, manual or external signal trigger

  Dimensions: 19 inch/6U/4U

  Magnetic Field Strength: varies per coil: TCXS111 single turn1m*1m square coil: 1-100A/m continuous, 100-400A/m(1-10 short time) TCXS113three-turn 1m*1m square coil: 1-300A/m continuous, 300-1200A/m 1~10s short time

  Max input power: 100W

  Output Current: 50Hz/60Hz sine wave +/- 5%

  Repetition time: 1-9999s

  Standards Met: IEC/EN 61000-4-8, GB/T 17626.8

  Test duration: 1-28800s

  Generic Standards: IEC 61000-6-1, IEC 61000-6-2

  6-8 Weeks

  VIEW PRODUCT Cart

• 

  3ctest PFS 2216SVD Single Phase Power Fail Simulator w/ Two Semiconductor Switches for High Current Protection

  SKU: sku-591

  Weight: 40Kg

  Communication: Ethernet LAN、RJ45

  Coupling: BNC

  Dimensions: 19 inch/6U

  Dips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29

  Frequency: 45-65Hz

  General Data: Technical Details

  Input: BNC,5V TTL

  Mains & EUT Connections: 4mm banana line

  Maximum Continuous Power: 100W

  Output Current: 16A AC/DC continuous current; 20A continuous 5s 40Acontinuous 3s

  Peak inrush current capability: 500 Amps

  Phase synchronization: 0°- 360°，1° step or random

  Repetition time: 0.3-9999 cycle or 5ms-9999ms

  Rise time: 1-5us（100Ω load）

  Supply Voltage: 110V/220V, ±10%, 50/60Hz

  Test duration: 50ms-50000ms

  Test Voltage: 250V AC，300V DC

  Trigger: BNC,5V TTL

  VIEW PRODUCT Cart

• 

  3ctest PFS 2216SD Power Fail Simulator for EN/IEC 61000-4-11

  SKU: sku-590

  Test Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29

  Mains & EUT Connections: 4mm banana line

  Output Current: 16A AC/DC continuous current; 20A continuous 5s 40Acontinuous 3s

  Peak inrush current capability: 500 Amps

  Applications: EMC Precompliance Testing, Conducted Immunity

  Rise time: 1-5us（100Ω load）

  Test duration: 50ms-50000ms

  Test Voltage: 250V AC，300V DC

  Trigger: BNC,5V TTL

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  3ctest PFS 6030A Power Failure Simulator for Voltage Dips & Drops，60 V / 30 A

  SKU: sku-588

  Test voltage: Voltage drop: 1V max@30A

  Weight: 20 kg

  Dimensions: 19" / 4 U

  Output: DUT voltage monitoring output: BNC，10:1 coaxial terminal output DUT current monitoring output: BNC，10A:1V coaxial terminal output

  Peak current: 60A duration time 500 ms

  Pulse duration: Drop duration time td 1us - 10 s

  Repetition rate: 100 ms - 999s

  Source Impedance: High resistance or low resistance

  Test Voltage: 0–60 V

  Trigger: External trigger signal by oscilloscope, BNC,5V TTL

  Trigger of bursts: Automatic, manual, external

  VIEW PRODUCT Cart

• 

  3ctest EFT 500T Burst/EFT Simulator w/ Three Phase CDN

  SKU: 4559

  Applications: Conducted Immunity Testing, EMC on Medical Devices, CE Marking

  Standards Met: IEC 61000-4-4,IEC 61326,EN 61000-6-1,IEC 61850-3,EN 61000-6-2

  Built-in three phase CDN: AC 380V/16A; DC-1 220V/16A

  Output Voltage Range: 0.25 to 4.8kV

  Condition of Used (Scale 5 - 10): 8

  Pre Programmed Test Routines: Yes

  Cost New:

  Was:

  Price Now:

  $1,395.00 - $17,250.00

  In Stock

  ORDERING OPTIONS

• 

  Com-Power ISN Calibration Kit for ISN and LCL Adapters

  SKU: sku-580

  VIEW PRODUCT Cart

• 

  AH Systems SAS-545 1 GHz Biconical Antenna

  SKU: sku-573

  Weight: 1.6 lb.'s (725 g)

  Antennas: Biconical Antennas

  Application/Test Type: Radiated emissions and immunity

  Connector: N-type (female)

  Dimensions: Height: 15 in. (38.1 cm) Width: 14 1/4 in. (36.25 cm) Depth: 7 11/16 in. (19.5 cm)

  Frequency Range: 30 MHz - 1GHz

  Gain: -50 to 2.5 dBi

  Impedance: 50 Ohms nominal

  Maximum Continuous Power: 200 Watt

  Mounting Base: ABC-B Mounting Clamp with ¼ - 20 Thread, female

  VIEW PRODUCT

• 

  Teseq AMZ 41A Absorbing Clamp for CISPR 13 & 14, w/ LE 210 RF Cable

  SKU: 30080

  Weight: approx. 7 kg

  Application/Test Type: Disturbance power measurements of coaxial cables, automotive screened components (eg motor ignition systems and sheath current on aerial cables.

  Clamp factor (CF): -4 dB to +5 dB

  Current Rating: 25 Amps Max

  Decoupling factor DF: Greater than 21 dB

  Decoupling factor DR: Greater than 30 dB

  Dimensions: W x D x H: 665 mm x 120 mm x 105 mm

  Frequency Range: 30 MHz to 1000 MHz

  Isolated lines under test: Power supply lines and other connecting lines

  Max. Cable Diameter: 20 mm inner (10 mm with adapter)

  Maximum Continuous Power: 10 Watts

  Min. site attenuation: 13 dB to 22 dB

  RF Connector: BNC, 50 Ω

  Standards Met: CISPR 13, CISPR 14-1, CISPR 16-1-5, CISPR 16-2-2

  Inquire for Lead Time

  VIEW PRODUCT Cart

• 

  3ctest D1550 Stripline for ISO 11452-5 Road Vehicles, 50Ω

  SKU: sku-562

  Connector type: N 50 Ω

  Dimensions: 4.30 x 1.5x 1.05 m, .95 m table height

  Distance between the plates: 150 mm

  Frequency range: 0 GHz - 1 GHz

  Max. input power: 1000 W

  Standards Met: ISO 11452-5

  Stripline: Conform with ISO 11452-5

  Typical impedance: 50 Ω

  Typical VSWR (30 - 1000 MHz): Better than 1.22

  VIEW PRODUCT Cart

• 

  Teseq MDS 21B EMC Absorbing Clamp for Disturbance Power Measuring, w/ 6 dB Attenuator & RF Cable

  SKU: sku-559

  Weight: approx. 6.3 kg

  Current Rating: 30 A

  Dimensions: 610 mm x 115 mm x 80 mm

  Frequency Range: 30 MHz to 1000 MHz

  Impedance: 50 Ω

  RF Connector: N, female

  VIEW PRODUCT Cart