Test Type

Test Type Test Equipment, Systems & Solutions

• 

  R&S FSL18 18 GHz Spectrum Analyzer

  SKU: 63263

  Frequency Range: 9 kHz to 18 GHz

  Signal Analysis Bandwidth: 28 MHz

  Video Bandwidth: 10 Hz to 10 MHz

  Phase Noise: typ. –103 dBc (1 Hz) at 10 kHz from carrier, 1 GHz

  In Stock

  VIEW PRODUCT Cart

• 

  Amplifier Research CI00400AM4 BCI RF Conducted Immunity Generator

  SKU: sku-1076

  2 reviews

  Test Capabilities: RF Conducted Immunity

  Standards Met: IEC/EN 61000-4-6, MIL-STD-461 CS114, ISO 11452-4, DO-160 Section 20

  Applications: BCI Testing

  CDN Test Levels (w/ built-in amplifier): 60Vrms

  BCI Test Levels (w/ built-in amplifier): 400mA/114 dBµA

  Frequency Range (w/ built-in amplifier): 9 kHz - 1 GHz

  Videos: Software Overview

  Industries: Automotive EMC, Military & Aerospace, CE Marking

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Langer EMV P603/P750 IC Test System Probe Set for RF Conducted Measurement

  SKU: 30000

  Measurement Analysis: 1 Ohm / 150 Ohm

  Application: Conducted Emissions

  Test Standards: IEC 61967-4

  Cost New:

  Was:

  Price Now:

  $1,285.00 - $12,830.00

  Lead Time 2-4 Weeks

  ORDERING OPTIONS

• 

  BCI-CF Bulk Current Injection Probe Calibration Fixture

  SKU: 7256

  Frequency Range: 150 kHz - 400 MHz

  Applications: IEC 61000-4-6 , MIL-461 , RF Conducted Immunity

  Max Probe Girth: 3.6"

  Fits Probe Apertures: 1" to 1.5"

  In Stock

  VIEW PRODUCT Cart

• 

  LANGER P512 RF Power Injection and Measurement IEC 62132-4

  SKU: 30056

  High power injection: 2 W at 12 GHz

  RF-Measurements: Up to 12 GHz

  Attenuation: Less than 3 dB up to 12 GHz

  SWR: lower than 2

  Scope of delivery: P512 (RF probe), SMA-SMA 1m cable 18 GHz HS (high performance microwave cable with SMA), Power Supply Unit

  Applications: Radiated RF Immunity Testing

  Test Standards: IEC 62132-4

  Typically In Stock

  VIEW PRODUCT Cart

• 

  NH Research 9200 Battery Cell, Pack and Module Test System

  SKU: 6698

  DC Voltage Output: 40 Volts

  DC Current Output: 2,400 Amps

  Charge/Discharge Modes: Constant-Voltage(CV), Current(CC), Power(CP), Resistance(CR)

  Cost New:

  Was:

  Price Now:

  $2,250.00 - $4,500.00

  In Stock

  ORDERING OPTIONS

• 

  Tektronix TDS3052C Oscilloscope 500 MHz

  SKU: 12247

  Bandwidth: 500 MHz

  Channels: 2

  Sample rates on all channels: 5.0 GS/s

  standard record length on all channels: 10 k

  continuous waveform capture rate: 3,600 wfms/s

  Applications: How to Capture an Electrical Transient Using an Oscilloscope, EMC Precompliance Testing

  Cost New:

  Was:

  Price Now:

  $250.00 - $2,500.00

  In Stock

  ORDERING OPTIONS

• 

  LISN-CISPR16-100A 3-Phase, 100 Amp Line Impedance Stabilization Network

  SKU: 12114

  Current Rating: 100 Amps continuous

  Frequency Range: 9 kHz to 30 MHz

  Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke

  Applications: Conducted Emissions Testing

  Standards Met: CISPR 16-1-2; VDE 0876; FCC part15; MIL-STD 461

  Voltage Rating: DC – 400V, 60Hz – 270VAC, 400Hz – 130VAC

  RF Connector: N (f)

  Cost New:

  Was:

  Price Now:

  $7,600.00

  Typically In Stock

  ORDERING OPTIONS

• 

  R&S FSL3 Spectrum Analyzer

  SKU: 11988

  Frequency Range: 9 kHz - 3 GHz

  Condition (5-10 Scale): 9 (Good)

  Need it Fast?: Spectrum Analyzer Rentals Ship Same Day

  Cost New:

  Was:

  Price Now:

  $195.00 - $3,500.00

  In Stock

  ORDERING OPTIONS

• 

  EM Test AIF 503N32.1 3-Phase Flicker Impedance Network

  SKU: sku-1917

  Standards Met: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7 and more

  Application/Test Type: Medical Device EMC Testing

  Built-in Power Analyzer: EM Test DPA 503N

  Current Handling: 32 Amps per phase

  RENTAL ONLY

  VIEW PRODUCT Cart

• 

  Thermo Keytek E510A 10kV Surge Generator

  SKU: 10799

  Standards Met: ANSI/IEEE C62.41 Cat. B and IEC 61000 4-5

  Phase synchronization: ±15° with optional coupler/decoupler

  Pulse current (short circuit): 8/20µs, 0-5.05kA with 2 ohm effective source impedance, ±10%

  Pulse repetition: 1 shot/18 seconds

  Pulse voltage (open circuit): 1.2/50µs, 0-10.1kV ±10% in 1 volt steps

  Repetition time: Adjustable from 300ms to 5s; 1ms resolution

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Thermo Keytek ECAT Transient Generator System

  SKU: 11321

  Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.

  Pulse repetition: 1 shot/9 seconds

  Pulse voltage (open circuit): 200V - 6.6kV ± 10%

  Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

  Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864

  In Stock

  VIEW PRODUCT Cart