Test Equipment by EMC & Compliance Standards

Standards Categories

CE Mark Testing

FCC Part 15

International (IEC/EN)

Automotive EMC Standards

Telecom Testing

Standards by Product/Industry

Standards Test Equipment, Systems & Solutions

Haefely ONYX 16 ESD Simulator Gun for IEC 61000-4-2

SKU: 10536

1 review

Air Discharge Voltage Range: 1 to 16 kV or 1 to 30 kV

Battery: at least 16 hour battery life

Contact Discharge Voltage Range: 1 to 16 kV or 1 to 30 kV

Frequency Capabilities: single/0.1/0.2/0.5/1/2/5/10/20 Hz

Holding Time: More than 5 sec

Polarity: positive & negative

Pre-Programmed IEC Levels: Yes

Resolution: 100V steps

Standards Met: IEC/EN 61000-4-2, ISO 10605

Cost New:

Was:

Price Now:

$295.00 - $1,495.00

Ships Same Day

ORDERING OPTIONS
EM Test ACS 503N30 AC Voltage Source for Harmonics & Flicker

SKU: 1312

Applications: Flicker and Harmonics Testing

Test Standards: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and more

Outpur Power: 30 kVA (300 Volts)

Output Current: inductive load: 41 A (43 A), resistive: 34 A (33 A), capacitive: 27 A (26 A) cont., 78 A 79 A) for 3 s, 300 A repetitive peak

Frequency Range: 10 to 80 Hz

Inquire for Availability

VIEW PRODUCT Cart
EMCO (ETS-Lindgren) 3810-2 LISN, NEMA, 9 kHz - 30 MHz, 10 Amps

SKU: 11287

Application/Test Type: Power line conducted emissions tests

Current Rating: 10 Amps

Dimensions: 8.7 x 15 x 6 inches / 22.2 x 38.1 x 15.2 cm

Frequency Range: 9 kHz to 30 MHz

Inductors: 50 µH/250µH

Mains & EUT Connections: NEMA typical. (SCHUKO and British available upon request)

RF Connector: 50Ω BNC Monitor

Standards Met: FCC Part 15, VDE 0871, VDE 0875

Voltage Rating: 250 VAC (Line to Ground)

Cost New:

Was:

Price Now:

$195.00 - $1,975.00

In Stock

ORDERING OPTIONS
Rent Agilent (HP) E7401A EMC Analyzer, 9 kHz to 1.5 GHz

SKU: 10260

Applications: Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMC

Pre-programmed Test Limits: FCC Part 15, CISPR 22, MIL-STD-461

Max Frequency: 26.5 GHz

Min Frequency: 9 kHz

Sweep/Test Speed: Moderate

Amplitude Accuracy: 0.37 dB

Resolution Bandwidth: 1 Hz to 5 MHz

Cost New:

Was:

Price Now:

$995.00
Teseq CDN HSS-2 Surge CDN for High Speed Communication Lines

SKU: 6195

Application/Test Type: ISDN, 10/100BaseT, 1000BaseT etc., switchable per jumper, PoE applicable; 2 kV* (1.2/50 μs pulse as per IEC/EN 61000-4-5); Max. surge test current: 50 A (8/20 μs pulse as per IEC/EN 61000-4-5)

Current Rating: 1 A (rated for Power over Ethernet)

Insertion Loss: 9 dB at 100 MHz

Mains & EUT Connections: RJ45 female; HV connector female (Fischer D103A023)

Standards Met: IEC 61000-4-5 Ed. 3

Voltage Rating: 100 VDC between pairs

RENTAL ONLY

VIEW PRODUCT
3ctest CDN 405M40-5 Surge Coupler for Unshielded Unsymmetric Lines

SKU: 30188

Test Standards: EN/IEC 61000-4-5

Applications: Data lines Unshielded, Unsymmetrical Surge Immunity

Data Rate: 100 Kbit/s

Surge Voltage Handling: 6kV

Inquire for Availability

VIEW PRODUCT Cart
Schwarzbeck NNBL 8226 MIL-STD-461 LISN

SKU: 6862

Frequency Range: 9 kHz - 100 MHz

Max. cont. current: 70 A

Max. current (limited time): 100 A

Max Voltage (DC): 500 V

Max. Voltage (AC 50/60 Hz): 250 V

Max. Voltage (AC 400 Hz): 140 V

Impedance: (50μH + 5 Ω) || 50 Ω (+/- 20 %)

DC-Resitance mains-EuT: ca. 10 mΩ

EUT Connectors: Wing terminals

Test Standards: MIL-STD-461

Cost New:

Was:

Price Now:

$2,775.00

Typically in Stock

ORDERING OPTIONS
Amplifier Research 100A400AM20 4 kHz - 400 MHz, 100 Watt RF Amplifier for BCI Testing

SKU: 12087

Weight: With Cabinet 18.5 kg (41 lbs) Without Cabinet 10.4 kg (23 lbs)

Dimensions: With cabinet: 50.3 x 15.5 x 55.1 cm (19.8 x 6.1 x 21.7 in) Without Cabinet: 48.3 x 13.2 x 55.1 cm (19 x 5.2 x 21.7 in)

Flatness: FLATNESS: ±1.0 dB typical, ±1.5 dB maximum

Frequency Range: 4kHz–400MHz

Gain: GAIN (at maximum setting): 50 dB minimum GAIN ADJUSTMENT (Continuous Range) : 20 dB minimum

Impedance: 50 ohms

Input: 100-240 VAC, 50/60Hz, 500 watts

Output: POWER OUTPUT @ 3dB COMPRESSION: Typical: 125 watts, Minimum: 100 watts POWER OUTPUT @ 1dB COMPRESSION: Typical: 85 watts, Minimum: 75 watts

RF Connector: Type N female

RF Input Voltage: 1.0 milliwatt maximum for rated output

VIEW PRODUCT Cart
IEC/EN 61000-4-X Test Rack for Conducted Immunity Certification

SKU: 11195

Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations

Standards Met: IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11, IEC/EN 61000-4-12

Applications: Electrical Transient and Noise, Surge Immunity, Power Failures

Test Setup: Conducted Immunity/Susceptibility Test Setup

Max EUT Power: 600 Voltas @ 100 Amps

Peak inrush current capability: 500 A (at 230 V)

EFT/Burst Pulse Output Capability: 4.8 kV

Combination/Wave Surge Output Capability: 4.4 kV (in 1 V steps)

Generic Standards: IEC 61000-6-1, IEC 61000-6-2

Inquire for Availability

VIEW PRODUCT Cart
3ctest TIS 700 Automotive Transient Simulator ISO 7637

SKU: 11772

2 reviews

Test voltage: 25 - 700 Volts

Max EUT DC Voltage (W/ Built In CDN): 60 Volts

Max EUT DC Current (W/ Built In CDN): 30 Amps

Standards Met: ISO 7637, SAE J1455, and OEM Specific Standards

Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical Disturbances

Cost New:

Was:

Price Now:

$1,975.00 - $22,500.00

In Stock

ORDERING OPTIONS
EMC Partner ESD3000 ESD Generator

SKU: 10723

Weight: 1.7 kg

Battery: at least 8 hour battery life

Voltage Range: .08 up to 30kV depending on module type

Pre-Programmed IEC Levels: Yes

Resolution: 100V steps

Standards Met: Depending on Module: IEC 61000-4-2, ISO 10605, RTCA DO-160, Mil-STD-464, Mil-STD-883, Mil-STD-750D

Cost New:

Was:

Price Now:

$795.00 - $2,195.00

Typically In Stock

ORDERING OPTIONS
Rohde & Schwarz ESRP7 EMI Test Receiver per CISPR 16-1-1

SKU: 22721

Frequency Range: 9 kHz to 7 GHz

SSB Phase Noise: –90 dBc (1 Hz) (typ.)

Frequency Response: 100 kHz ≤ f ≤ 7 GHz, < 3 dB

Dynamic Range: 110 dB

RF Output Connector: N Type Female, 50 Ω

VSWR: 1.3, nominal

Applications: Differences Between EMI Test Receivers and Spectrum Analyzers

EMC Standards: CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461 and FCC

CALL FOR LEAD TIME

VIEW PRODUCT Cart