RF Field Strength Meters - Rentals, Refurbished

RF Field Strength Meters Test Equipment, Systems & Solutions

Wavecontrol SMP3 RF Field Meter

SKU: 8899

Frequency Range: DC to 60 GHz

Battery Life: >24 Hours

Readout Values: Total field (instantaneous, max., min. and average) Field components (X, Y, Z)

Measurement Range: 0.2 - 1000 V/m

High Pass Filters: 1 Hz, 10 Hz, 25 Hz and 100 Hz

Probe Selection: E & H Field (DC - 60 GHz)

More Features: Long and Short Term Recoding Options, Peak and RMS, Many more.

Typically In Stock

View Product
Narda NBM-550 Broadband Field Meter, 100 kHz - 60 GHz

SKU: 11612

Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.

Battery: NiMH rechargeable batteries 4 x AA size (Mignon), 2500 mAh

Dimensions: 19.5 mm in height

Frequency Range: 100 kHz - 60 GHz

Operation Time: 20 hours (backlight off, no GPS) 12 hours (permanent backlight, no GPS) 10 hours (GPS receiver connected, no backlight)

Recharging Time: 2 hours

Videos: Software Setup

Typically In Stock

View Product
Narda NBM-520 Broadband Field Meter, 100 kHz - 90 GHz

SKU: 6278

Measurement Units: V/m, A/m, mW/cm² or W/m², % for shaped probes

Battery Life: 20 hours

Recharging Time: 2 hours

Calibration Status: NIST (5/22/2023)

PC Interface: Fiber Optic via USB (6 ft cable)

Software: NBM-TS, Tile, EMCWare, EMC32

Videos: Software Setup

Compatible Probes: See

In Stock

View Product
Narda FieldMan 0 Hz to 90 GHz All-in-One Electromagnetic Field Meter

SKU: 12955

Frequency Range: 0 Hz/1 Hz/100 kHz to 90 GHz

Logging Info: Temperature, Humidity, Air Preassure, Geolocation, Distance to Ground

Electric Field Units: V/m, mW/cm2 , W/m2 , % of standard (depending on the connected probe)

Magnetic Field Units: A/m, Tesla, Gauss, mW/cm2 , W/m2 , % of standard (depending on the connected probe)

Compliance Standards: 2013/35/EU, IEC/EN 62311, ICNIRP 1998, ICNIRP 2010, IEC/EN 62233, GB-8702-2014, EMFV 2016

Industry Standards: IEC / EN 62232, IEC 62577, EN 50519 g. IEC / EN 62233, IEC / EN 62822, EN 50500, IEC 62764, IEC/EN 62110, IEC/EN 60601

Applications: Radiated Emissions, EMC Radiated Immunity in a Test Chamber

Battery Life: 16 Hours (2-4 Hour Recharge)

Operating Modes: Field Strenght, Aptial Agerage, Timer logging, Spectrum/FFT Analysis, Shaped Time Domain assessment, Scope

Cost New:

Was:

Price Now:

$495.00 - $1,850.00

Typically In Stock

Ordering Options
Wavecontrol SMP2 Broadband Field Strength Meter

SKU: 7056

Weight: 10.6 oz.

Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.

Battery: NiMH rechargeable batteries 4 x AA size (Mignon), 2500 mAh

Dimensions: 1.5 x 2.0 x 8 inches

Frequency Range: 100 kHz - 60 GHz

Operation Time: 20 hours (backlight off, no GPS) 12 hours (permanent backlight, no GPS) 10 hours (GPS receiver connected, no backlight)

Recharging Time: 2 hours

Standards Met: IEC 61000-4-3

IN STOCK

View Product
Narda NIM-511 Electric and Magnetic Field Meter

SKU: 856

Frequency Range: 100 kHz to 100 MHz

Electric Field Measurement Range: 0.1 to 100 mW/cm2 (20 to 614 V/m)

Magnetic Field Measurement Range: 0.2 to 200 mW/cm2 (0.073 to 2.3 A/m)

Inquire for Availability

View Product
Anritsu MS2090A Real-time Handheld Spectrum Analyzer

SKU: 8840

Frequency Range: 9 kHz - 43.5 GHz

Analysis Bandwidth: 110 MHz

Resolution bandwidth (RBW): 1 Hz to 10 MHz

Real-Time Spectrum Analysis bandwidth:: 22, 55, 110 MHz (option dependent)

Amplitude Accuracy: ± 0.5 dB, typical

Standard Cable Length: 1 Meter

Applications: RF Interference Analysis and EMF Sniffing and Much More

Cost New:

Was:

Price Now:

$1,895.00 - $2,795.00

Typically In Stock

Ordering Options
Narda EFD-5091 50 GHz E-Field Probe

SKU: 84851

Measurement Range: 8 to 614 V/m (True RMS)

Frequency Range: 300 MHz to 50 GHz

Sampling Rate: 5 Hz / 270 ms

Isotropic Deviation: ±1 dB (0.6 GHz to 8 GHz), ±1.4 dB (8 GHz to 45.5 GHz)

In Stock

View Product
Narda EFD-9091 E-Field Probe 100 MHz to 90 GHz

SKU: 8485

Measurement Range: 0.5 to 400 V/m (CW), Typ. 0.5 to 61.4 V/m (True RMS)

Dynamic Range: 58 dB (nominal)

Flatness: ±3 dB (300 MHz to 40 GHz), +3/-6 dB (100 MHz to 60 GHz)

Isotropic Deviation: ±1.25 dB (100 MHz to 10 GHz), ±2 dB (>10 GHz to 26.5 GHz)

Applications: Radio link, telecommunications, satellite, and radar

In Stock

View Product
Wavecontrol WPF8 100 kHz - 8 GHz Electric Field Probe

SKU: 6883

Frequency range: 100 kHz - 8 GHz

Sensor type: Isotropic RMS diode technology

Type of frequency response: Flat

Sensitivity: 0.2 V/m

Calibration: ISO 17025 accredited (ILAC)

Calibration period: 24 months (recommended)

Temperature range: - 20 ºC to 50 ºC

Temperature response: + 0.1/ - 1 dB (related to 20 ºC)

Attenuation at 50/60 Hz: > 80 dB

In Stock

View Product
Wavecontrol WPF3-HP 100 kHz - 3 GHz E-Field Probe

SKU: 12068

Field Strength Range: 0.2 - 1,000 V/m

Application/Test Type: Monitoring electric field strengths

Videos: Menu Run-Through

Frequency Range: 100 kHz - 3 GHz

Typically In Stock

View Product
Narda Broadband E-Field Meter Kit, 100 kHz - 50 GHz

SKU: sku-885

Weight: 10.6 oz.

Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.

Battery: NiMH rechargeable batteries 4 x AA size (Mignon), 2500 mAh

Dimensions: 1.5 x 2.0 x 8 inches

Frequency Range: 100 kHz - 60 GHz

Operation Time: 20 hours (backlight off, no GPS) 12 hours (permanent backlight, no GPS) 10 hours (GPS receiver connected, no backlight)

Recharging Time: 2 hours

Standards Met: IEC 61000-4-3

Cost New:

Was:

Price Now:

$595.00 - $2,495.00

Typically In Stock

Ordering Options