Overview
The Rohde & Schwarz ESI26 EMI test receiver is commonly used by The EMC Shop customers for accurate and reliable electromagnetic interference (EMI) measurements across a wide frequency range. It enables engineers to perform both pre-compliance and full compliance testing with confidence, helping identify emissions issues early in the development process.
In EMC testing environments, customers use the ESI26 in spectrum analyzer mode or EMI receiver mode to evaluate conducted and radiated emissions. Its high sensitivity and low phase noise performance allow for precise detection of interference signals, making it suitable for detailed diagnostics and troubleshooting.
Engineers rely on the ESI26 for validating products against EMC standards, reducing redesign cycles, and ensuring regulatory compliance. Its flexible bandwidth settings and FFT capabilities provide efficient measurement workflows, saving time while maintaining accuracy.
At The EMC Shop, the ESI26 is typically used in lab and compliance test setups where dependable results and repeatability are critical. Customers benefit from its proven performance, versatility, and ability to support a wide range of EMC testing applications.
Accessory Kit
- 2.92mm R&S Adapter
- Calibration Certificate
- Power Cable
- USB Manual
| Specifications | |
|---|---|
| Frequency Range | 20 Hz to 26.5 GHz |
| Frequency Resolution | 0.01 Hz |
| Resolution Bandwidth (RBW) | 1 Hz to 10 MHz (1/2/3/5 steps) 3 dB Bandwidths Available |
| Video Bandwidth (VBW) | 1 Hz to 10 MHz |
| Display Range | 10 to 200 dB (10 dB steps) |
| Maximum Input Level | 137 dBµV (≈ 1 W) |
| Measurement Accuracy | High Accuracy EMI Measurements with CISPR Compliance |
| Detectors | Peak Quasi-Peak Average RMS |
| Sweep Time | 0 Hz Span: 1 µs to 16000 s >10 Hz Span: ≥20 updates/s (single trace) |
| Display | 400 × 400 Pixels Split Display Supported |
| Storage | 3.5" FDD 1.44 MB Floppy Drive Internal Hard Disk |
| Interfaces | IEC/IEEE Bus (GPIB) Internal Computer Control |
| Operating Temperature | +10 °C to +40 °C |
| Storage Temperature | -40 °C to +70 °C |
| Power Supply | 100/120/230/240 V ±10% |
| Dimensions (W × H × D) | 435 × 236 × 570 mm |
| Weight | Approx. 25.1 to 27 kg |
| Standards Compliance | CISPR 16-1 VDE 0876 ANSI, FCC, EN Standards |
