Telecom Testing Categories
Telecom Testing Test Equipment, Systems & Solutions
-
PA40G10M Millimeter-Wave Low Noise Amplifier
SKU: 1888
Max Frequency: 40 GHzMin Frequency: 10 MHzOutput Power: +18 dBm (P1dB)Gain: 40 dB typicalMax RF Input Power: +6 dBm @ 1 dB compressionAC Input Power: 100/220 VAC regulated P/Soutput: 12 VDC 170 mARF Connector: 2.9mm(f)EMC Standards: CISPR 11, CISPR 32, FCC Part 15Applications: EMI Precompliance Testing Emissions Measurements, CE Marking$495.00 - $6,975.00IN STOCK -
EM Test NX5 Compact EMC Generator for EFT/Burst, Surge & Power Fail
SKU: 10547
Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & VariationsStandards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11Applications: Conducted Immunity Testing, CE Marking, Medical DevicesMax EUT Voltage (w/ Built in CDN): 300 VoltsMax EUT Current (w/ Built in CDN): 16 AmpsPeak inrush current capability: 500 Amps (up to 2.5 kA)EFT/Burst Pulse Output Capability: 5.5 kVCombination/Wave Surge Output Capability: 5 kVExternal Coupling: Data Lines (EFT & Surge), 3PH EUTDips, Interrupts & Variations: 16 Hz - 500 Hz and DC$2,195.00 - $4,250.00Typically In Stock -
3ctest EDS MAX20 ESD Simulator Gun
SKU: 141241
Test Standards: IEC/EN 61000-4-2, IEC/EN 61000-6-1, IEC/EN 61000-6-2, IEC/EN 61326, IEC 61340-3-1, ISO 14304, ITU-T K.20, Bellcore GR-1089-CoreTest Voltage: 0.5 k V - 20 k V (± 5%)Frequency: Single, 0.1 Hz, 0.2 Hz, 0.5 Hz, 1 Hz, 2 Hz, 5 Hz, 10 Hz, and 20 HzBattery Charge time: Approx. 5 hPre-programmed Test Routines: According to IEC 61000-4-2Applications: EMC Precompliance Testing, Electrostatic Discharge Immunity$475.00 - $8,975.00Typically In Stock -
EM Test TSS 500N6B Telecom Surge Simulator
SKU: 6885
Output Voltage: 100 - 5,000 VoltsOutput Current: 5 - 500 Amps per wireTest Standards: Bellcore/Telcordia GR-1089-CORE, ITU-T K.12, ITU-T K.28, ITU-T K.45Pulse Waveforms: 10/360µs, 10/1,000µs and 2/10µsTelecom Port Testing: 2-wire, 4-wire (up to 12 pair with CNB 500)$2,975.00 - $95,490.00In Stock -
QRHA40G 18 GHz to 40 GHz Quad Ridge Horn Antenna
SKU: 32052
Frequency Range: 18 - 40 GHzIsotropic Gain: 17 dBiPort Isolation: 30 dBMax RF Input Power: 40 WattsTypically In Stock -
HA40G 18 GHz - 40 GHz Horn Antenna, 20 Watt Handling
SKU: 11861
Frequency Range: 18 GHz - 40 GHzApplications: Antenna Pattern Measurements, EmissionsTest Standards: IEC 61000-4-3Gain: 12 to 17 dBiConnector: K(f) Type -
Narda EF 5092 50 GHz Electric field Probe for NBM Meter
SKU: 1738
Frequency Range: 300 MHz to 100 GHzProbe Type: Electric E-FieldMeasurement Range: 8 to 614 V/mDynamic Range: 37 dBDirectivity: Isotropic (Tri-axial)Applications: Radiated Emissions Testing, Radiated ImmunityTest Standards: IEC 61000-4-3In Stock -
Amplifier Research FL7040/Kit 40 GHz E-Field Probe Kit
SKU: 8937
Application/Test Type: Radiated Immunity, Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF roomsTest Standards: IEC 61000-4-3, MIL 461 RS103Field Strength Range: 2 - 1000 V/mFrequency Range: 2 MHz - 40 GHzIn Stock -
Teseq CDN S900S RS-232 Coupling Decoupling Network for IEC 61000-4-6
SKU: 10828
Weight: 1.5 kg (3.3 lbs)Application/Test Type: Coupling / decoupling network (CDN) for screened data/telcom lines or coaxial cablesCommon Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 ΩCurrent Rating: 250 mA (CDN ST08 1 Amp)Decoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)Frequency Range: 10 kHz to 80 MHz or 150 kHz to 230 MHzMains & EUT Connections: BNC 50 Ω, N 50 Ω, BNC 75 Ω, N 75 Ω, XLR 3 pins, DIN 5 pins, RJ45, D-Sub 9 pins, D-Sub 15 pins, D-Sub 25 pins, HDMI (refer to data sheet for exact model specifications)RF Connector: BNC 50 ΩRF Input Voltage: 20 Volts MaxStandards Met: IEC 61000-4-6, CISPR 22, IEC 60601-1-2Voltage Division Factor: 9.5 dB to 10 dB ±1 dB (refer to data sheet for some exceptions)Voltage Rating: AC max. voltage (line to ground): 100 V - 250V; DC max. voltage (line to ground): 150 V - 400 V; Test voltage: 200 V - 750 V DC, 2 sec (refer to data sheet for exact model specifications)$1,190.00 -
Rent EM Test TSS 500M2F Telecom Surge Simulator for FCC Part 68
SKU: sku-776
Weight: approx. 35kgApplication/Test Type: Test levels as per FCC part 68Coupling: Telecom ports: Tip to Ground, Ring to Ground, Tip and Ring to Ground Power ports 250V/16A: L toN, L to PE, N to PE , L+N to PEDimensions: 19“ / 6HU,Output Current: 64A – 1,000A (power line) 20 – 200A per wire (surge A)Outputs: 4 mm banana socketPolarity: pos / neg / alternateRise time: Less than 2 usTelecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendationsTest Voltage: 160V – 2,500V ± 10% (power line) 160V – 1,500V ± 10% (surge A)Trigger of bursts: Automatic pulse release -
EM Test CSS 500N10 Current Surge Generator, 8/20us Up To 10ka
SKU: 30061
Weight: approx. 66 lbs.Coupling: N/ADimensions: 19"/6HU,Polarity: positive / negative / alternatePulse current (short circuit): 0.4kA to 10kA +/-10%Pulse voltage (open circuit): 250V to 6,000V +/-10%, Step width 50VRepetition time: Max. 10 pulses per minute, depending on the charging voltageInquire for Availability -
EM Test TSS 500N10 Telecom Surge Generator ITU-T for Enhanced Level Testing up to 10 kV
SKU: sku-403
Weight: approx. 37.1 kg (81.8 lbs.)AC Power Adapter: Supply voltage 115/230 V +10/-15%Dimensions: 19"/9 HU, 420 mm x 448 mm x 500 mmEnergy Storage Capacitor: 1 uF (Pulse 1.2/50 us) 20 uF (Pulse 10/700 μs) 20 uF (Surge Pulse B)Front Time: 1 us ± 30% (Pulse 1.2/50 us) 10 us ± 30% (Pulse 10/700 μs) 9 us ± 30% (Surge Pulse B)Pulse Duration: 50 us ± 20% (Pulse 1.2/50 us) 700 us ± 20% (Pulse 10/700 us) 720 us ± 20% (Surge Pulse B)Standards Met: IEC 61000-4-5 ITU-T K.17 ITU-T K.20 ITU-T K.21 ITU-T K.28 ITU-T K.45 (and more)Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendationsTest Voltage: 500 V - 10,000 V ± 10%