IEC 61000 Test Equipment - The EMC Shop

International (IEC/EN)

(Showing 12 of 248)

Rent IEC 61000 Test Equipment The EMC Shop stocks IEC 61000 test equipment for compliance on commercial electronics. Rent, buy or lease test equipment for CE, UL or other compliant mark on your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.

Application Support, Pricing, Lead Time & More: Contact Form

International (IEC/EN) Categories

International (IEC/EN) Test Equipment, Systems & Solutions

Schaffner CDN 8014 Burst/EFT Coupling Clamp for EN/IEC 61000-4-4

SKU: 10545

Compatible Generators: EFT Generators Electrical Noise/Transient Immunity

Standards Met: IEC/EN 61000-4-4

Cost New:

Was:

Price Now:

$2,990.00

Inquire for Availability
Materials for EFT/Burst Laboratory Test Setup

SKU: 11245

Floor Ground Plate Dimensions: 9" by 6" (Custom sizes available)

Standards Met: IEC 60601-1-2, IEC 61000-4-2

Applications: Test Setup for Burst/EFT, EMC Precompliance Immunity Testing

Table Dimensions: .8 meters (H)

Table Top Ground Plane: 1.6m x .8m

Additional App Notes: EFT Waveform Verification, Troubleshooting EFT Failures

IN STOCK

VIEW PRODUCT Cart
Noiseken ESS-S3011A & GT-30RA Electrostatic Discharge Simulator System for up to 30kV Testing

SKU: 8250

Weight: Approx. 7.0kg (gun holder excluded) Approx. 7.5kg (gun holder included)

Air Discharge Voltage Range: 0.20kV to 30.0kV±5%（30.5kVmax）10.0kV : 0.01kV step 30.0kV : 0.1kV step

Standards Met: IEC 61000-4-2, ISO 10605

Battery: AC100V to AC240V 50Hz／60Hz ±10% 75VA

Contact Discharge Voltage Range: 0.20kV to 30.0kV±5% （30.5kVmax） 10.0kV : 0.01kV step 30.0kV : 0.1kV step

Polarity: positive/negative

Pre-Programmed IEC Levels: Yes

Resolution: 10 Volt steps up to 10 kV; 100 Volt steps to 30 kV

Typically In Stock

VIEW PRODUCT Cart
Em Test CWS 500N1.4 RF Conducted Immunity Test System for IEC 61000-4-6

SKU: 11251

Test Capabilities: RF Conducted Immunity

Standards Met: IEC/EN 61000-4-6

Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

CDN Test Levels (w/ built-in amplifier): 40Vrms

BCI Test Levels (w/ built-in amplifier): 8Vrms

Frequency Range (w/ built-in amplifier): 150 kHz - 230 MHz

Typically In Stock

VIEW PRODUCT Cart
EMIC-20 EM Injection Clamp for IEC/EN 61000-4-6 Immunity Test

SKU: 7851

Standards: EN/IEC 61000-4-6

Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling

Clamp factor (CF): -.5 dB at 100 kHz to -4 dB at 1 GHz (Min -7 dB at 700 MHz

Connector: N-type female

Dimensions: 632 mm x 120 mm x 80 mm

Frequency Range: 10 kHz to 1000 MHz

Max. Cable Diameter: 20 mm

Maximum Continuous Power: 0.15 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 5 min; 230 to 1000 MHz: 50 W for 3 min

Test Setup and Overview: RF Conducted Immunity Testing

Cost New:

Was:

Price Now:

$595.00 - $8,500.00

Typically In Stock

ORDERING OPTIONS
Teseq NSG 3040 Transient Immunity Test System

SKU: 4141

Test Capabilities: Combination Wave Surge Immunity, EFT/Burst, Dips Interrupts & Variations

Standards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11, IEC 61000-4-29

Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

Max EUT Voltage (w/ Built in CDN): 264 Volts

Max EUT Current (w/ Built in CDN): 16 Amps

EFT/Burst Pulse Output Capability: 4.8 kV

Combination/Wave Surge Output Capability: 4.4 kV

Generic Standards: IEC 61000-6-1, IEC 61000-6-2

Cost New:

Was:

Price Now:

$1,495.00 - $17,750.00

In Stock

ORDERING OPTIONS
3 Phase Combination Wave Generator System

SKU: 30127

Standards Met: IEC 60601-1-2, IEC/EN 61000-4-5

Applications: EMC Surge, CE Marking

DUT Power Handling: 3 PH 16 Amps

In Stock

VIEW PRODUCT Cart
GTEM 550V Vertical GTEM

SKU: 30081

Max. EUT Size: 35(L) x 40(W) x 27(H) cm / 13 x 15 x 10 in

Standards for Emissions Testing: CISPR 14-1, IEC 61000-6-3, and IEC 61000-6-4

Standards Met: IEC 61000-4-20

Applications: Radiated Immunity, Radiated Emissions

Inquire for Lead Time

VIEW PRODUCT Cart
ETS Lindgren 5407 GTEM Test Cell

SKU: sku-1075

Inquire for Availability

VIEW PRODUCT Cart
Schloder CN 1240-125 125A Coupling Network

SKU: 30174

Frequency Range: DC, 15 Hz - 150 kHz

Input Voltage: 0 V up to ± 300 V

Rated Voltage (AE - EUT): 250 V AC/DC

Rated current (AE - EUT): 125 A

Connector: BNC

Connection (AE - EUT): 6 mm MC-jack

Applications: Conducted Immunity

Test Standards: EN/IEC 61000-4-16

Inquire for Availability

VIEW PRODUCT Cart
Schaffner NSG 2025-4 EFT / Burst Generator Built in Three Phase Coupler

SKU: 11294

Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

Burst frequency: 0.1 kHz - 1,000 kHz

Burst time: Rise Time: 5ns ±20% (50 W, 10 - 90%) Pulse Width: 50ns ±30% (50 W and 1 W), 100ns ±50% open circuit

Coupling: Line to reference ground (IEC 1000-4-4), selected lines together to reference ground, all lines to reference ground (common mode)

Mains & EUT Connections: HV Coax (Direct); L, N and PE via Coupler

Phase synchronization: Asynchronous/synchronous 0 - 360° ±2°

Polarity: Positive/Negative

Pulse amplitude: 200 Volts - 4.5 kV (20 Volt Steps)

Repetition time: 100ms to 10s

Test duration: 1 to 150 pulses (15ms burst duration as per IEC 61000-4-4 up to 10 kHz)

Cost New:

Was:

Price Now:

$975.00 - $6,750.00

In Stock

ORDERING OPTIONS
Teseq INA 701 Magnetic Field Coil for IEC 61000-4-8 and IEC 61000-4-9

SKU: 30172

Max. Contin. Frequency Current Supply: 10 A

Max. Short Term Frequency Current Supply: 30 A (3 s)

Max. Contin. Frequency Field Strength Supply: 330 A/m

Max. Short Term Frequency Field Strength Supply: 11100 A/m

Applications: Radiated Immunity

Test Standards: EN/IEC 61000-4-8, EN/IEC 61000-4-9

Inquire for Availability

VIEW PRODUCT Cart