CISPR Standards Categories
CISPR Standards Test Equipment, Systems & Solutions
-
Teseq ISN T8-Cat6 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs
SKU: 11163
Frequency Range: 150 kHz to 80 MHzImpedance: 150 Ω ±20 ΩRF Input Voltage: 15V -
EN/ETSI ISN 303417 ISN for WPT (Wireless Power Transmission) Systems
SKU: 34159
Test Standards: CISPR 24, CISPR 32, CISPR 16-1-2 Annex ECable Type: Cat 6 (Cat 3 and Cat 5 with add-on module)Data Speed: 10GBASE-TCompliant to: CISPR 22, Appendix D, Fig. D.3In Stock -
LISN-CISPR25-800 Artificial Mains Network (AMN) for Electric Vehicles
SKU: 22141
EUT Current Handling: 800 AmpsEUT Voltage Handling: 1,000 Volts DC (400V 50/60Hz, 300V 400 Hz)Applications: Conducted Emissions, BCI Testing , Automotive EV EMCTest Standards: CISPR 25, MIL-STD-461, ISO 21498-2, ISO 11452-4, DO-160, DEF-STAN-59, ECE R10Additional Test Standards: ISO 7637-2, ISO 7637-4,Inductance: 5 µH2-4 WEEKS -
-
Teseq ISN S752 Impedance Stabilization Network for Coaxial Lines
SKU: sku-174
Weight: approx. 1.5 kgDimensions: (W x H x D): 100 mm x 100 mm x 240 mmFrequency Range: 150 kHz to 230 MHzImpedance: 150 Ω ±20 ΩRF Input Voltage: 20 V -
Rent Com-Power ISN-T8 for One, Two, Four, Unshielded Balanced Pair, CAT-3, CAT-5
SKU: 30150
Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]Current Rating: 800 mA (per line), 1.6 Amps (per pair)Dimensions: see photo in imagesFrequency Range: 150 kHz to 30 MHzIsolation: 150 kHz to 1.5 MHz: 35 to 55 dB 1.5 MHz to 30 MHz: 55 dBMains & EUT Connections: D-sub 25 pin female connectorsRF Connector: 50Ω N-type (female)Standards Met: CISPR 16-1-2, CISPR 22Voltage Rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)$410.00 - $4,100.00Typically in Stock -
EM Test Automotive Transient Emission Set for ISO 7637-2
SKU: 30011
Applications: EV and AutomotiveTest Standards: ISO 7637-2Includes: AN 200N100 Artificial Network, BS 200N100.1 Electronic Switch, and BSM 200N40 Mechanical Switch (see specs in Overview)Inquire for Availability -
PMM (Narda) AS-02 Antenna Set, 30 MHz - 3 GHz, 75 Watts
SKU: 6598
Antenna Factor (1 Meter): -15 +2 dB typical (30 MHz - 200 MHz); 6 dB typical (200 MHz - 3 GHz)Antennas: Kits & SetsApplication/Test Type: Radiated EMCConnector: N-Type(female)Dimensions: 65 x 65 x 137 cm (BC-01); 70 x 10 x 86 cm(LP-02)Frequency Range: 30 MHz - 200 MHz/200 MHz - 3 GHzGain: 8 - 36 dB typicalImpedance: 50 Ω nominalMaximum Continuous Power: 100 Watts up to 1 GHz (50 watts up to 3 GHz)Inquire for Lead Time -
Rent Com-Power LI-3P-132 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network
SKU: 11124
Weight: 27.5 lbs.Application/Test Type: Power Line Conducted Emissions TestsCurrent Rating: 32 AmperesDimensions: 19.3” x 13.9” x 2.3"Frequency Range: 150 kHz to 30 MHzInductors: 50 µHInsertion loss: less than 0.7 dBIsolation: more than 40 dBMains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power JackRF Connector: RF Measurement Port 50Ω - N-Type (female)Standards Met: ANSI C63.4, CISPR 16-1-2Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705VInquire for Availability -
LISN-CISPR16 25 Amp Line Impedance Stabilization Network 50μH/250μH
SKU: 12014
Weight: 28 lbsApplications: EMC Conducted Emissions, Precompliance TestingFrequency Range: 9 kHz - 30 MHzOutput Current: 25 AmpTest Standards: CISPR 16 LISNRF Connector: RF Out BNC Female, Test Item SHUKO ConnectorIn Stock -
Com-Power EMC Testing Turntable TTW-104
SKU: 5102
Diameter: 4 feet (1.2 meters)Height: 9 inches (23 cm)Load Rating: 1000 lbs (455 kg)RPM: 2.1Remote Switch: Reversing drumWeight: 149 lbs (68 kg)Applications: Radiated Immunity$1,200.00 - $12,000.00In Stock -
Com-Power CLCE-438 RF Current Monitoring Probe
Top Frequency Range: 400 MHzBottom Frequency Range: 9 kHzApplications: RF Current Monitoring, EMC BCI Tests, Military EMC TestingRF Current Handling (CW/Pulse): 3/800 AmpsTest Standards: DO-160 Section 20, MIL-STD-461AC Current Handling (DC-400Hz): 30/50 AmpsDiameter: 1.5"In Stock