ISO 11452 Test Equipment - The EMC Shop

ISO 11452

(Showing 12 of 73)

ISO 11452 is the standard and procedure for testing automotive and EV cars, components and sub-assemblies. Sections provide test process for certain electrical and wireless phenomena while provideed guidance on determning product test levels and pass/fail criteria.

The EMC Shop stocks test equipment, as well as shielded enclosures for precompliant testing. Rentals of certain ISO 11452 sections can be shipped the same day, to allow customers to being measuring and troubleshooting immediately.

ISO 11452 consists of the following parts, under the general title Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy:

— Part 1: General principles and terminology
— Part 2: Absorber-lined shielded enclosure
— Part 3: Transverse electromagnetic mode (TEM) cell
— Part 4: Harness excitation methods
— Part 5: Stripline
— Part 7: Direct radio frequency (RF) power injection
— Part 8: Immunity to magnetic fields
— Part 9: Portable transmitters
— Part 10: Immunity to conducted disturbances in the extended audio frequency range
— Part 11: Reverberation chamber

ISO 11452 Categories

ISO 11452-2 Shielded Room & Test Apparatus

ISO 11452-4

ISO 11452-8 Magnetic Immunity

ISO 11452-10 Immunity to Audio Frequencies

ISO 11452 Test Equipment, Systems & Solutions

ERG6G 9 kHz - 6 GHz EMC RF Signal Generator

SKU: sku-2186

Frequency Range: 9 kHz to 6 GHz

Options: AM, FM, Pulse

Typically In Stock

VIEW PRODUCT
LISN-CISPR25-800 Artificial Mains Network (AMN) for Electric Vehicles

SKU: 22141

EUT Current Handling: 800 Amps

EUT Voltage Handling: 1,000 Volts DC (400V 50/60Hz, 300V 400 Hz)

Applications: Conducted Emissions, BCI Testing , Automotive EV EMC

Test Standards: CISPR 25, MIL-STD-461, ISO 21498-2, ISO 11452-4, DO-160, DEF-STAN-59, ECE R10

Additional Test Standards: ISO 7637-2, ISO 7637-4,

Inductance: 5 µH

2-4 WEEKS

VIEW PRODUCT Cart
3ctest APS 40C10 DC Transient Pulse Simulator for Automotive ISO 7637-2 Pulse 2B/4

SKU: sku-867

Weight: 35 Lbs

Dimensions: 19" 4U Chassis

Output: Single polarity output: 0~40V

Rise time: 10us(resistive load)

Source Impedance: 10mΩ

VIEW PRODUCT
CISPR 25 ALSE Test Chamber Build & Install

SKU: 11326

Frequency Range: DC - 40 GHz

Isolation: 100-110 dB typical (75 dB min in the Magnetic Field)

1-6 Months

VIEW PRODUCT Cart
Fischer F-52 Current Monitor Probe

SKU: sku-1665

Connector: Type-N

Dimensions: Height: 38 mm

External Diameter: 98 mm

Frequency Range: 10 kHz – 500 MHz

Internal Diameter: 40 mm

Rated Power: 50 amperes

VIEW PRODUCT Cart
HVSB-200A High Voltage Shielded Box for LISNs/AMNs

SKU: 8220

Applications: Automotive EMC testing

Test Standards: ISO 7637-4, CISPR 25

Shielding Effectiveness: typ. > 100 dB

Connectors: RF-N

Material: Aluminum

Cable cross section: 6-16 mm²

Diameter HV-cable (measured at shield): 5-9 mm

Wrench size HV-cable feedthrough: 17 mm

IN STOCK

VIEW PRODUCT Cart
RF/EMC Anechoic Test Chamber Build and Install

SKU: sku-1326

Test Standards: CISPR 25, MIL-STD-461, IEC 61000-4-3, CISPR 16 and more

Chamber Sizes: 1 meter and 3 meters (10 meters coming soon)

Frequency Range: 30 MHz - 100 GHz

Chamber Types: Anechoic, Semi-Anechoic, Reverberation, Tent/Portable

Faster Than Most!

VIEW PRODUCT Cart
Em Test CWS 500N3 Test Generator for Mil-STD-461, ISO 11452 and More

SKU: sku-253

Weight: Approx. 36kg

Amplifiers: low-frequency signal source with amplifier

Dimensions: 19"/6HU (555mm x 448mm x 286mm)

Frequency range: 10Hz - 250kHz

General Data: Technical Details

Harmonic Distortion (THD): less than -20dBc at 100W power 0.5ohm

Operating Temperature: 10°C - 40°C

Signal current: Max. 15A rms

Signal level: 0.001V - max. 7Vrms (14Vrms)

Signal power: 100W (nominal)

Supply Voltage: 115V or 230V +10/-15%, 50/60Hz

VIEW PRODUCT Cart
Rent Teseq CIP 9136A Current Injection Probe for Automotive BCI Testing

SKU: sku-129

Weight: 2 kg (4.4 pounds)

Aperture: 43 mm (1.7 inches) inside; 113 mm (4.44 inches) outside

Application/Test Type: Injecting current levels up to 1 kW per Qinetiq and meets HIRF testing Ideal for automotive BCI testing

Connector: N-Type up to 1,000 Watts

Dimensions: 61 mm wide (2.4 inches)

Frequency Range: Features & Specifications of Teseq CIP 9136A:

Impedance: 100 ohms typical at resonance

Standards Met: ISO 11452-4, RTCA/DO-160 section 20, MIL-STD-461; IEC/EN 61000-4-6

VIEW PRODUCT
AR CI00 Series RF Conducted Immunity Systems

SKU: 10420

Test Capabilities: RF Conducted Immunity

Standards Met: IEC/EN 61000-4-6, CS114, ISO 11452-4, DO-160 CS"

Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

CDN Test Levels (w/ built-in amplifier): 60Vrms

BCI Test Levels (w/ built-in amplifier): 400mA/114 dBµA

Frequency Range (w/ built-in amplifier): 9 kHz - 1 GHz

VIEW PRODUCT Cart
Pearson 8700i Bulk Current Injection Probe for MIL-STD-461 CS114, CS115, CS116

SKU: 10532

Test Standards: MIL-461 CS114, MIL-461 CS115

Additional Test Standard: MIL-461 CS116

Hole Diameter: 2 inches

Max. Input Power: 100 W (for 1 hour)

Frequency Range: 10 kHz to 400 MHz

Inquire for Availability

VIEW PRODUCT
Teseq HV-AN 150 Artificial Network (AN) for Automotive, Airborne and MIL

SKU: 10834

Applications: Conducted Emissions, BCI Testing, Automotive EV EMC

Test Standards: CISPR 25, MIL-STD-461, ISO 7637

Max EUT DC Voltage: 1,000 Volts

Max EUT Current: 150 Amps

Max EUT AC Voltage (60Hz/400Hz): 500V/350V

Inductance: 5 µH

Inquire for Lead Time

VIEW PRODUCT Cart