Test Equipment, Systems & Solutions

• 

  Teseq CDN M432 32 Amp Coupling/Dcoupling Network

  SKU: sku-226

  Weight: 6.5 kg (14.3 LB.'s)

  Application/Test Type: 4 mains AC power lines emissions testing up to 32 Amps (2L+N+PE), (3L+PE), optional (3L+N)

  Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω

  Current Rating: 32 Amps Maximum

  Decoupling of Common Mode Disturbance: Greater than 30 dB

  Dimensions: 6.3 x 6.3 x 20 inches (16.0 cm x 16.0 cm x 50.0 cm)

  Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)

  Insertion Loss: Greater than 0.1 dB

  Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)

  RF Connector: BNC, 50 Ω

  RF Input Voltage: Less than 30 V

  Standards Met: IEC 61000-4-6

  Voltage Division Factor: 10 dB +3 dB / -1 dB

  Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec

  View Product View Product

• 

  Teseq CDN M416 4-Line Coupling/Decoupling Network

  SKU: sku-225

  Weight: 700 grams (1.5 LB.'s)

  Application/Test Type: 3 power lines, (L+N+PE), (2L+PE), (Optional L+L+L)

  Common Mode Impedance: 150 Ω +10/-20 Ω

  Current Rating: 10 Amps Maximum

  Decoupling of Common Mode Disturbance: Greater than 30 dB

  Dimensions: 4.1 x 3 x 5 inches (10.5 x 7.5 x 12.5 cm)

  Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)

  Insertion Loss: Greater than 0.1 dB

  Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)

  RF Connector: BNC, 50 Ω

  RF Input Voltage: Less than 30 V

  Standards Met: IEC 61000-4-6, CISPR 16-1-2, CISPR 16-2-1 and CISPR 15

  Voltage Division Factor: 20 dB ±1.5 dB

  Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec

  View Product View Product

• 

  Teseq CDN M316 Coupling/Decoupling Network (CDN) CDN M3 Type

  SKU: sku-224

  Weight: 700 grams (1.5 LB.'s)

  Application/Test Type: 3 power lines, (L+N+PE), (2L+PE), (Optional L+L+L)

  Common Mode Impedance: 150 Ω +10/-20 Ω

  Current Rating: 10 Amps Maximum

  Decoupling of Common Mode Disturbance: Greater than 30 dB

  Dimensions: 4.1 x 3 x 5 inches (10.5 x 7.5 x 12.5 cm)

  Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)

  Insertion Loss: Greater than 0.1 dB

  Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)

  RF Connector: BNC, 50 Ω

  RF Input Voltage: Less than 30 V

  Standards Met: IEC 61000-4-6, CISPR 16-1-2, CISPR 16-2-1 and CISPR 15

  Voltage Division Factor: 20 dB ±1.5 dB

  Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec

  View Product Cart

• 

  Teseq CDN M210B Coupling Network with CEE 7/17 EUT Port & IEC 60320 C14 AE Port

  SKU: sku-223

  Weight: 3.3 Lbs (1.5 kg)

  Application/Test Type: switchable 2 or 3 power lines, (L+N or L+N+PE)

  Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω

  Current Rating: 10 Amps

  Decoupling of Common Mode Disturbance: 150 kHz: Greater than 30 dB 1.5 MHz: Greater than 60 dB 30 MHz: Greater than 40 dB 230 MHz: Greater than 20 dB

  Dimensions: 3.9" x 3.9" x 9.5" (100 mm x 100 mm x 240 mm)

  Frequency Range: 150 kHz to 230 MHz

  Insertion Loss: Less than 0.1 dB

  Mains & EUT Connections: AE Euro: IEC 60320 C14 EUT-socket 2lines: CEE 7/17;

  RF Connector: BNC 50 Ω

  RF Input Voltage: 30 Volts Max

  Standards Met: IEC/EN 61000-4-6

  Voltage Division Factor: 150 kHz to 80 MHz: 9.5 dB ±1 dB 80 MHz to 230 MHz: 9.5 dB +3 dB / -2 dB

  Voltage Rating: AC max. voltage (line to ground): 250 V DC max. voltage (line to ground): 400 V; 3 kV DC, 2 sec

  Cost New:

  Was:

  Price Now:

  $1,020.00

  Ordering Options

• 

  Teseq CDN M1-10 Coupling Network 10 KHz to 80 MHz for PE Lines

  SKU: sku-222

  Weight: 3.3 Lbs (1.5 kg)

  Application/Test Type: switchable 2 or 3 power lines, (L+N or L+N+PE)

  Common Mode Impedance: 10 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 80 MHz: 150 Ω +60 Ω / -45 Ω

  Current Rating: Current max. (no saturation): 300 mA; Current max. (1 s for PE line test): 25 A

  Dimensions: 3.9" x 3.9" x 9.5" (100 mm x 100 mm x 240 mm)

  Frequency Range: 150 kHz to 230 MHz

  Insertion Loss: Less than 0.1 dB

  RF Connector: BNC 50 Ω

  RF Input Voltage: Less than 20 Volts

  Standards Met: IEC/EN 61000-4-6

  Voltage Division Factor: 10 dB ±1 dB

  Voltage Rating: 3 kV DC, 2 sec

  Cost New:

  Was:

  Price Now:

  $790.00

• 

  Teseq CDN 3083-Surge 620 Volt, 100-200 Amp Manual Coupler

  SKU: sku-220

  Weight: 80 kg (176 LB's)

  Application/Test Type: Manual Surge Testing for EUT up to 100Amps, 620 VAC; Three phase (5 wire); Two phase (4 wire); Single phase (3 wire)

  Current Rating: 100 Amp or 200 Amp continous depending on model

  Dimensions: 850 x 520 x 345 mm

  Mains & EUT Connections: Fischer 105 series; Screw terminals, rated for 230 A

  RF Input Voltage: Max. 8 kV / 4 kA

  Standards Met: IEC / EN 61000-4-5:2005, ANSI C62.45 standard, in IEC / EN 61000-4-12:2006 and ANSI C62.41

  Voltage Rating: 620 VAC RMS L-to-L (max. 440 V for NSG 3040 and Modula); 620 VAC RMS L-to-PE (max. 440 V for NSG 3040 and Modula); 620 VDC

  View Product Cart

• 

  Com-Power PAM-118A High Gain EMC Broadband Preamplifier

  SKU: 10217

  Weight: 2.5 lbs (1.1 3Kg)

  Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals. It also provides input isolation to your spectrum analyzer or receiver.

  Connector: 50Ω Precision N-type (female)

  Dimensions: 7.7 x 6.5 x 3.2 inches (184 x 156 x 77 mm)

  Frequency Range: 500 MHz - 18 GHz

  Gain: 40 dB typical (± 2.5 dB flatness)

  Input: 15 VDC, 500 mA

  Maximum Continuous Power: +102dBm @ 1 dB compression

  RF Input Voltage: 0 Vdc (max)

  VSWR: 2.2:1 maximum

  Inquire for Availability

  View Product Cart

• 

  Com-Power PAM-6000 High Gain EMC Preamplifier, 1 - 6 GHz

  SKU: sku-216

  Weight: 3.3 lbs. (1.5 kg)

  Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements

  Connector: 50Ω N-Type (f)

  Dimensions: 7.5 x 5 x 3 inches

  Frequency Range: 1 GHz - 6 GHz

  Gain: 30 dB typical (± 1.5 dB flatness)

  Input: 10 VDC, 2 dBm

  Maximum Continuous Power: +13 dBm @ 1 dB compression

  VSWR: 2.1:1 Input/1.8:1 Output

  View Product Cart

• 

  Com-Power PAM-840A Ultra Wideband Preamplifier, 18 GHz- 40 GHz, 37 dB Gain

  SKU: 10214

  Weight: 2.5 lbs (1.1 3Kg)

  Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals. It also provides input isolation to your spectrum analyzer or receiver.

  Connector: 50Ω 2.9mm female

  Dimensions: 7.6 x 5.95 x 2.17 inches (192 x 151 x 55 mm)

  Frequency Range: 18 GHz - 40 GHz

  Gain: 42 dB typical (± 2 dB flatness)

  Input: +15Vdc, 500 mA

  Maximum Continuous Power: +10 dBm @ 1 dB compression

  VSWR: 2.25:1 maximum

  Inquire for Availability

  View Product Cart

• 

  AH Systems PAM-1840VH High Gain Broadband Preamplifier, 18 - 40 GHz

  SKU: sku-213

  Weight: 1.1 lbs. / 0.5 kg

  Application/Test Type: Overcome attenuation problems at higher frequencies. Match to double ridge guide horn antenna.

  Connector: 2.9mm(f) to 2.9mm(f)

  Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

  Frequency Range: 18 GHz - 40 GHz

  Gain: 37 dB typical (33 dB minimum)

  Input: 100/220 VAC regulated P/S output: 12 VDC 275 mA

  Maximum Continuous Power: +8 dBm @ 1 dB compression

  VSWR: less than 2.9:1 typical

  View Product Cart

• 

  AH Systems PAM-1840 High Frequency Broadband Preamplifier, 18 - 40 GHz

  SKU: sku-212

  Weight: 1.1 lbs. / 0.5 kg

  Application/Test Type: Overcome attenuation problems at higher frequencies.

  Connector: 2.9mm(f) to 2.9mm(f)

  Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

  Frequency Range: 18 GHz - 40 GHz

  Gain: 20 dB typical (15 dB minimum)

  Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

  Maximum Continuous Power: +6 dBm @ 1 dB compression

  VSWR: less than 1.7:1 typical

  View Product Cart

• 

  AH Systems PAM-1826 High Frequency Preamplifier, 18 - 26.5 GHz

  SKU: sku-211

  Weight: 1.1 lbs. / 0.5 kg

  Application/Test Type: EMI Precompliance Testing Emissions Measurements, CE Marking

  Connector: SMA(f) to SMA(f)

  Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

  Frequency Range: 18 GHz - 26.5 GHz

  Gain: 32 dB typical

  Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

  Maximum Continuous Power: +6 dBm @ 1 dB compression

  VSWR: 1.7:1 typical

  EMC Standards: CISPR 11, CISPR 32, FCC Part 15

  View Product Cart