Categories
Test Equipment, Systems & Solutions
-
Rent Solar 9247-50-TS-50-N LISN for CISPR 16-1, FCC Part 15, ANSI C63.4
SKU: sku-302
Application/Test Type: Power line conducted emissions testsCurrent Rating: 50 AmpsFrequency Range: 10 kHz to 50 MHzInductors: 50 µH (0.10 µF Coupling Capacitor)Mains & EUT Connections: Terminal ScrewRF Connector: 50Ω N-type (female)Standards Met: FCC Part 15, CISPR 16-1, ANSI C63.4 (1992)Voltage Rating: 500 VAC (Line to Ground), 800 VDC -
Rent Noiseken CA-805B Coupling Adapter for Noise Injection
SKU: sku-296
Weight: Approx. 3 kgsDimensions: (W)350 x (H) 120x (D)130 mm$295.00 -
Used EM Test CA EFT Kit Calibration Set for EFT/Burst Generators (50 Ohm & 1 kOhm Load Resistors)
SKU: sku-295
-
Rent EM Test CWS 500D RF Simulator for MIL-STD-461 CS114 & More
SKU: sku-291
Test Standards: IEC/EN 61000-4-6, MIL-461 CS114, ISO 11452-4, DO-160 Section 20Applications: Bulk Current Injection Testing, RF Conducted ImmunityTypically In Stock -
-
Amplifier Research (AR) ATR80M6G Wide Band, High Gain Log Periodic Antenna
SKU: 2657
Max RF Input Power: 5,000 WattsAntenna Factor (1 Meter): 14 to 67 db/m (±1.5 dB)Application/Test Type: Radiated Immunity TestingDimensions: 132.1 x 20.32 x 97.8 cm (52 x 8.0 x 38.5 in)Frequency Range: 80 MHz - 6 GHzMax Radiated Field Strength: 1,000 V/mVSWR: 2.0:1 (Max: 3.0:1)$1,275.00Typically In Stock -
PMM EP-604 300 kHz – 26.5 GHz Broadband Active Electric Field Probe
SKU: 8554
Application/Test Type: Monitoring Electric Field StrengthsField Strength Range: 0.4 - 800 V/m (0.01 V/m)Frequency Range: 300 kHz to 26.5 GHzStandards Met: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20Interfaces: Fiber-OpticTypically In Stock -
Com-Power CLA-150 32mm Absorbing Clamp CISPR 14
SKU: 1551
Test: CISPR 14Application/Test Type: Conducted Emissions, Radiated EmissionsClamp factor (CF): -3 dB to +4 dBDimensions: 627 x 114 x 165 mm (24.7 x .4.5 x 6.5 inches)Frequency Range: 30 MHz to 1000 MHzIsolated lines under test: Power supply lines and other connecting linesMax. Cable Diameter: 32 mm (1.26 inches)Min. site attenuation: 14 dB to 21 dBRF Connector: BNC (f), 50 Ohms$595.00Inquire for Availability -
Com-Power CLA-050 10mm Absorbing Clamp
SKU: sku-265
Weight: 5 kg (11.5 lbs)Aperture: 12.7 mm (0.5 inches)Application/Test Type: Measurement of direct field strength from EUT supply cablesClamp factor (CF): -3 dB to +4 dBDimensions: 627 x 114 x 144 mm (24.7 x .4.5 x 5.7 inches)Frequency Range: 30 MHz to 1000 MHzIsolated lines under test: Power supply lines and other connecting linesMax. Cable Diameter: 10 mm (0.39 inches)Min. site attenuation: 14 dB to 21 dBRF Connector: BNC (f), 50 OhmsStandards Met: CISPR 14 -
PMM L3-64/690V 690 Volt LISN for IEC 60309, UL1682, UL1686
SKU: sku-264
Weight: 50 kg (110 pounds)Application/Test Type: Ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under Test) may inject into the power line or mains.Current Rating: 63 Amps Max (IEC60309); 60 Amps Max (UL1682, UL1686)Dimensions: 465 x 450 x 740 mm (18 x 17.7 x 29 inches)Frequency Range: 9 kHz to 30 MHzInductors: 50 Ω // [5 Ω + 50 µH] with 250 µH chokeMains & EUT Connections: 4P5W connectorRF Connector: BNC (f)Standards Met: IEC 60309; UL1682; UL1686; CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461FVoltage Rating: 400 VAC, 565 VDC (L-PE, N-PE) 690 VAC, 975 VDC (L-L, L-N) -
Keysight (Agilent) N9038A-526 MXE EMI Receiver, 3 Hz to 26.5 GHz
SKU: 10259
Frequency Range: 20 Hz - 26.5 GHzResolution: 2 HzBandwidth accuracy (–3.01 dB): 1 Hz to 1.3 MHz ± 2 % (nominal)Dynamic Range: > 70 dBAmplitude Accuracy: < ± 2.7 dBEMC Standards: CISPR 11, CISPR 22, ANSI C63.2Typically In Stock -
