Categories
Test Equipment, Systems & Solutions
-
Teseq LNA 6900 Low Noise Amplifier 9 kHz to 2 GHz
SKU: sku-81
Weight: 0.27 Lb's (127 grams)Connector: N-type 50 OhmsDimensions: 28 mm x 95 mm x 27 mmFrequency Range: 1 MHz to 3 GHz (nominal range); 200 kHz to 4 GHz (utilizable range)Gain: 12.5 dB (±0.3 dB flatness)Input: 0 dBm (107 dBμV)Maximum Continuous Power: Greater than 12.5 dBm @ 1 dB compressionVSWR: less than 1.5:1 -
PMM L3-500 500 Amp, 9 kHz - 30 MHz Line Impedance Stabilization Network (LISN)
SKU: 10062
Weight: 248 kg (546 pounds)Application/Test Type: LISN for AC Three phase plus neutral V-Network power circuitsCurrent Rating: 300 Amps continuous (500 Amps for 20 minutes)Dimensions: 555 x 930 x 830 mm (21 x 36.6 x 32.6 inches)Frequency Range: 9 kHz to 30 MHzInductors: 50 Ω // [5 Ω + 50 µH] with 250 µH Choke or BypassInput: 230 V - 50/60 Hz, 50 VA each lineMains & EUT Connections: M14 boltsRF Connector: BNC (f)RF Input Voltage: BNC (f)Standards Met: CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F -
$3,025.00 -
-
PMM L3-100 Three Phase 100 Amp LISN for CISPR 16-1-2
SKU: 10058
Weight: 70 kg (154 pounds)Current Rating: 100 Amps continuous (125 Amps overload for 5 minutes)Dimensions: 465 x 450 x 740 mm (18.3 x 17.7 x 29 inches) - mounted on pallet for mobilityFrequency Range: 9 kHz to 30 MHzInductors: 50 Ω // [5 Ω + 50 µH] with 250 µH chokeMains & EUT Connections: 125 A plug and socket outlet according to IEC309 standardRF Connector: BNC (f)Standards Met: CISPR 16-1-2, VDE 0876, FCC Part 15, MIL-STD 461FVoltage Rating: 230 VAC, 325 VDC (L-PE and N-PE); 400 VAC, 565 VDC (L-L and L-N)Inquire for Availability -
-
Com-Power CDN-M225E Coupling Decoupling Network for Unscreened Power Supply Lines
SKU: sku-54
Weight: 5 lbs. 2.3 kgApplication/Test Type: two conductor power cableCommon Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60ΩCurrent Rating: 25 Amps AC / 17 Amps DC (Max)Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)Dimensions: 6 x 6 x 13 inches 15.2 x 15.2 x 33 cmFrequency Range: 150 kHz to 230 MHzMains & EUT Connections: 4 mm shrouded banana socketsRF Connector: 50 Ω BNC (Female)RF Input Voltage: 40 V (Max)Standards Met: IEC / EN 61000-4-6Voltage Division Factor: 9.5 dB +4 / -1Voltage Rating: 250 V AC / 350 V DC (Line to Ground) -
-
PMM (Narda) LP-02 Log Periodic Antenna, 200 MHz - 3 GHz
SKU: 10047
Weight: 1.1 kgs (2.4 LB's)Antenna Factor (1 Meter): 13 to 36 dB/m typicalAntennas: Log Periodic AntennasApplication/Test Type: Radiated emissions and immunityConnector: N-femaleDimensions: 70 x 10 x 86 cmFrequency Range: 200 MHz to 3 GHzGain: 6 dBi typicalImpedance: 50 Ω nominalVSWR: Under 2:1 (1.2:1 typical) -
Teseq MFO 6502 Automatic Power Line Frequency Magnetic Field Generator
SKU: 10045
Test Standards: IEC/EN 61000-4-8Antennas: Teseq INA 701, 702 or 703Compatible Generators: Teseq NSG 3040 and NSG 3060 -
Teseq MFO 6501 Manual Power Line Frequency Magnetic Field Generator
SKU: 10043
Test Standards: IEC 61000-4-8Antennas: Teseq INA 701, 702 or 703Test Frequency: Selectable 50 Hz and 60 Hz ±3%Magnetic Field Levels: Antenna Dependent$195.00Inquire for Availability -
Teseq INA 703 Magnetic Field Coil for NSG 3040 & NSG 3060
SKU: 10042
Test Standards: IEC 61000-4-8# of turns: 1, 5, 37Dimensions: Coil Size: 1 x 1 m, Homogeneous field volume: 60 x 60 x 50 cmMounting Base: Rigid aluminum frame with castersRF Connector: 4 pole connector (INA 3250)$129.00Typically In Stock