Test Equipment, Systems & Solutions

• 

  Amplifier Research 50S1G6 Solid-State Amplifier

  SKU: 2203

  Weight: 62.5 lbs.

  Dimensions: 50.3 x 20.3 x 54.6 cm 19.8 x 8.0 x 21.5 in

  Flatness: Small Signal Flatness:±1.5 dB typical ±2.5 dB maximum

  Frequency Range: 0.7 – 6 GHz

  Impedance: 50 ohms

  Input: Input for Rated Output 1.0 milliwatt maximum

  Output: POWER OUTPUT @ 1dB COMPRESSION Nominal 50 watts Minimum 40 watts

  RF Connector: Type N female

  View Product Cart

• 

  Sorensen SGA600-50D Programmable DC Power Supply Rental

  SKU: 12167

  Max Voltage: 600 Volts

  Max Current: 50 Amps

  Total Power: 30 kW

  Input Power: 480V/3PH

  Cost New:

  Was:

  Price Now:

  $695.00

  Typically In Stock

  Ordering Options

• 

  ECO500M 500 MHz Oscilloscope, Pre-Programmed for Waveform Measurements

  SKU: 12157

  Bandwidth: 500 MHz

  Trigger type: Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video, Qualified, Nth edge, Setup/hold, Delay, Serial

  Peak detect: 200 ps

  Sequence: Up to 80,000 segments, interval between triggers = 1.3 μs min.

  Channels: 4

  Applications: How to Capture an Electrical Transient Using an Oscilloscope

  Cost New:

  Was:

  Price Now:

  $29.00

  In Stock

  Ordering Options

• 

  DC18G-400 Directional Coupler, 500 MHz 18 GHz, 30 dB

  SKU: 7014

  Max Frequency: 18 GHz

  Min Frequency: 500 MHz

  Coupling Value: 30 dB

  Max Power Handling: 400 Watts

  Connectors (Main Line): N-Type Connection (f)

  Connectors (Coupling Line): SMA(f)

  VSWR: 1.3:1

  Cost New:

  Was:

  Price Now:

  $1,795.00

  Typically In Stock

• 

  PA50G 10 MHz - 50 GHz, RF Preamplifier, 30 dB Gain

  SKU: 8248

  Application/Test Type: Overcome attenuation problems at higher frequencies.

  Connector: 2.4mm(f) to 2.4mm(f)

  Frequency Range: 10 MHz - 50 GHz

  Gain: 25 dB typical

  Cost New:

  Was:

  Price Now:

  $795.00

  In Stock

  Ordering Options

• 

  Fischer F-14A-1 EMC Current Probe, 10 Hz - 500 kHz

  SKU: 12071

  Top Frequency Range: 500 kHz

  Bottom Frequency Range: 10 Hz

  AC Current Handling (DC-400Hz): 400 Amps

  RF Current Handling (CW/Pulse): 25 Amps

  Style: Clamp On (Fixed Window)

  Diameter: 2.6"

  Cost New:

  Was:

  Price Now:

  $295.00

  Typically In Stock

  Ordering Options

• 

  RFCP150M RF Current Monitoring Probe

  SKU: 6503

  Top Frequency Range: 150 MHz

  Bottom Frequency Range: 20 Hz

  AC Current Handling (DC-400Hz): 600 Amps

  RF Current Handling (CW/Pulse): 21/200 Amps

  Style: Clamp On

  Diameter: 1.25"

  Transfer Impedance: 5 Ohm

  Test Standards: IEC 61000-4-6

  IN STOCK

  View Product Cart

• 

  MIL-STD-461 CS101 Test Equipment Setup Rental Package

  SKU: sku-2047

  Test Standards: MIL-STD-461 CS101

  Applications: Conducted immunity and susceptibility, EMC precertification testing

  Frequency Range: 30 Hz to 150 kHz (Extendable down to 2 Hz and up to 500 kHz)

  Test Setup: Quick Start Guide Provided

  Shipping: Same Day, Larger Systems go Freight

  Cost New:

  Was:

  Price Now:

  $975.00

  Usually ships in 24 hours.

  Ordering Options

• 

  Radiated Emissions Test Equipment System

  SKU: 12013

  Technical Support: FCC and iNarte Technicians

  Test Setup: Quick Start Guide Provided

  Shipping: Same Day, Larger Systems go Freight

  Applications: EMC Precompliance Testing, Radiated Emissions

  Frequency Ranges: 2 Hz - 44 GHz

  Test Limits: Pre-programmed Per Customer Requirements

  Rental Details: Learn about Rentals & Rebillings

  Generic Standards: IEC 61000-6-3, IEC 61000-6-4

  Cost New:

  Was:

  Price Now:

  $795.00

  Usually ships in 24 hours.

  Ordering Options

• 

  3ctest Turnkey Automotive EMI Test System

  SKU: 11932

  Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical Disturbances

  ISO Automotive Standards: ISO 7637-2, ISO 16750-2, ISO 11452-8

  Max EUT DC Voltage (w/ Built In CDN): 60 Volts

  Max EUT DC Current (w/ Built In CDN): 30 Amps

  Peak Inrush Current Capability: up to 200 Amps

  SAE Automotive Standards: SAE J1113, SAE J1455,

  Typically In Stock

  View Product Cart

• 

  SunAR JB1 Broadband Hybrid Antenna, 30 MHz - 2 GHz

  SKU: sku-1895

  Impedance: 50 Ohm

  Weight: approx. 4.2 kg

  Antenna Factor (1 Meter): 7 to 33 dB/m

  Antennas: Bilogical Antennas

  Application/Test Type: RF EMC immunity testing, Improved high frequency gain

  Connector: N type female

  Dimensions: (L x H x W in mm): approx. 1525 X 980 X 410

  Frequency Range: 30 MHz to 3 GHz

  Gain: 6 dB (200 MHz to 3 GHz) / 8 dB (700 MHz to 2.5 GHz)

  Impedance-2: 50 Ω

  Maximum Continuous Power: 300 Watts

  Standards Met: IEC/EN 61000-4-3, CISPR 13, CISPR 14-1, CISPR 16-1-4, CISPR 16-2-3, CISPR 22, CISPR 24, CISPR 32, EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, IEC 60533, IEC 60601-1-2, IEC 61326, ISO 11452-2,

  VSWR: 2:1 Average

  View Product Cart

• 

  ETS-Lindgren 3141 Biconilog Antenna, 26 - 2000 MHz

  SKU: sku-1893

  Impedance: 50 Ohm

  Weight: approx. 4.5 lbs (2 kg)

  Antenna Factor (1 Meter): -23 to 8 dBi

  Antennas: Bilogical Antennas

  Application/Test Type: RF EMC immunity testing, Improved high frequency gain

  Connector: N type female

  Dimensions: 52.7 in. (133.9 cm) x 66.2 in (168.1 cm) x 30 in (76.2 cm)

  Frequency Range: 25 MHz - 6000 MHz

  Gain: 8 dBi

  Impedance-2: 50 Ohms

  Maximum Continuous Power: 500 Watts

  Standards Met: IEC/EN 61000-4-3, CISPR 13, CISPR 14-1, CISPR 16-1-4, CISPR 16-2-3, CISPR 22, CISPR 24, CISPR 32, EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, IEC 60533, IEC 60601-1-2, IEC 61326, ISO 11452-2,

  View Product Cart