Categories
-
Fischer Custom Communications F-2031-A-DCN-23mm Decoupling Ferrite Tube for IEC 61000-4-6
SKU: sku-727
Weight: 7.5kGApplication/Test Type: ferrite decoupling clampDimensions: Aperture: 23mm Length: 610mm Height: 134mmFrequency Range: 100kHz - 100MHzStandards Met: IEC/EN 61000-4-6 -
EFT/Burst & ESD Rental Package for IEC 61000-4-2 and IEC 61000-4-4
SKU: sku-669
Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4Burst frequency: 1 Hz to 2 MHzBurst time: 0.01 to 999 msCoupling: Built-in Single Phase 250 Volts AC / 110 Volts DC and 16 AmpsPolarity: positive, negative, alternating$1,595.00In Stock -
Rohde & Schwarz OSP130 RF Switch
SKU: 438
Rated Frequency: 50 Hz to 60 Hz (± 10 %)Rated Voltage: 100 V to 240 V AC (± 10 %)Dimensions: 465.3 mm × 108.7 mm × 494.8 mmConnectors: USB type A; LAN: Ethernet RJ-45 connector (f), 10/100 Mbit/s; CAN: 9-pin D-Sub connector (m), 512 kbit/s$1,950.00In Stock -
EM Test Automotive Test System for ISO 7637-2
SKU: 10596
ISO Automotive Standards: ISO 7637-2, ISO 16750-2, ISO 11452-8Freestyle Mode Micropulses: Programmable Rise time 1us - 10us in steps of 1us; Pulse duration 50us - 10,000us; Int. resistor 2ohm - 100ohm in steps of 5ohm; 200ohm, 400ohm and 450ohmInput: DUT supply +/- DC voltage from VDS 200N or any other DC supply; Pulse 5, 7 From one LD 200NMicropulse: Micropulse module for test pulses 1, 2A and 6Inquire for availability -
Keytek E503 Ring Wave Simulator for ANSI/IEEE C62.4 and UL 864
SKU: 10546
Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.Pulse repetition: 1 shot/9 secondsPulse voltage (open circuit): 200V - 6.6kV ± 10%Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864IN STOCK -
Schaffner CDN 8014 Burst/EFT Coupling Clamp for EN/IEC 61000-4-4
SKU: 10545
Compatible Generators: EFT GeneratorsElectrical Noise/Transient ImmunityStandards Met: IEC/EN 61000-4-4$2,990.00Inquire for Availability -
EM Test AutoWave for Generating and Recording Automotive Waveforms
SKU: 21477
Frequency Range: DC - 50 kHzSample Rate: 500 kS/s (1 ch)Output Channels: 2Output Voltage: 10 V, unipolar or bipolarVoltage: 10V, unipolar or bipolarNOT OFTEN -
Monthly Rental Teseq (Schaffner) CDN T002 Coupling Network for Unshielded Balanced Pairs
SKU: sku-318
Application/Test Type: EMC testing for unscreened data communication/telecom lines (Power over Ethernet, 1100BaseT4, 100Base VG-AnyLan, 1000BaseT, Token ring, ISDN, 10BaseT, 100BaseTX, ATM, FDDI, TP-PMDCurrent Rating: 1.5 Amps (3/5 Amp models available)Frequency Range: 150 kHz to 230 MHz (limited to 80 MHz on 3/5 Amp models)Mains & EUT Connections: Banana, XLR, RJ45, RJ11RF Connector: BNC, 50 Ω$99.00 -
Monthly Rental AH Systems SAS-510-2 Directional Log Periodic Antenna, 290 MHz - 2 GHz
SKU: 11317
Weight: 1.4 lb.'s (0.64 kg)Antenna Factor (1 Meter): 14 to 32 db/mAntennas: Log Periodic AntennasApplication/Test Type: FCC, MIL-STD, VDE and TEMPEST immunity and emissions compliance testingConnector: N-Type, female$295.00 - $750.00In Stock -
PMM 3010 EMC RF Signal Generator, 9 kHz to 1 GHz
SKU: 30169
Frequency Range: 9 kHz to 1 GHzFrequency Resolution: 1 kHzFrequency Accuracy: ± 10 ppm @ f > 10 MHzLevel Range: -107 to +10 dBmOutput Impedance: 50 ΩTypically in Stock -
Schwarzbeck NNBL 8226-2 Dual Path V-LISN NNBL
SKU: 30014
Frequency Range: (0.009) 0.15 - 30 (100) MHzTest Standards: MIL462D, MIL-STD-461E or MIL-461F, CISPR 16-1-2Applications: Conducted Emissions, BCI Testing , Automotive EV EMCMax. Continuous Current: 70 AMax. Current (limited time): 100 AInquire for Availability -
Com-Power FCLCE-1000 Current Probe Calibration Fixture
SKU: 11601
Output resistance: 50 OhmsRF Connector: N-Type