Categories

Test Equipment, Systems & Solutions

Amplifier Research ATS700M11G Log Periodic Antenna

SKU: 4353

Frequency Range: 700 MHz to 10.5 GHz

Impedance: 50 Ω nominal

VSWR (Typical): <1.5:1 to 7 GHz, ≤2.8:1 7 GHz to 10.5 GHz

Connector: N-Type (f)

Front to Back Ratio: -15 dB (minimum)

Applications: RF Radiated Susceptibility Testing

Test Standards: IEC 61000-4-3

Cost New:

Was:

Price Now:

$1,095.00

In Stock

Ordering Options
Steatite QWH-SL-2-18-S-HG-R Linearly Polarised High Gain Wideband Ridged Horn Antenna

SKU: 1058

Frequency: 2 to 18 GHz

Gain: 9.3 to 22.8 degrees

Antenna Factor: 24 to 35 dB/m

Connector Type: SMA type jack

Power Handling: 20 Watt c.w.

Typically In Stock

View Product Cart
Schwarzbeck FMZB 1513 Active Receive Loop Antenna

SKU: 30113

Applications: Antenna Pattern Measurement

Test Standards: CISPR, MIL, FCC Part 15, ISO, ETSI

Additional Test Standards: EN, ANSI

Frequency Range: 9 kHz - 30 MHz

Connector: 50 Ω N-Type (f)

Frequency Response: < +/- 1 dB

Loop Diameter: 0.5 m

Typically In Stock

View Product Cart
Teseq (Schaffner) NSG 2050 System PNW 2050 w/ CDN 131/133

SKU: 11050

Standards Met: IEC/EN 61000-4-5, IEC/ISO 60601-1-2

Applications: EMC Surge, CE Marking, Surge Immunity

Max EUT AC Voltage (W/ Built In CDN): 690 Volts

Max EUT AC Current (W/ Built In CDN): 32 Amps

Max EUT DC Voltage (W/ Built In CDN): 270 Volts

Max EUT DC Current (W/ Built In CDN): 16 Amps

Combination/Wave Surge Output Capability: 4.4 kV

External Coupling: Data Lines (Surge), 3PH EUT

Warranty: 100 Days

Condition (5-10 Scale): 8

Equipment Group: Combination Wave Generators

Test Setup: Surge Immunity Test, Setup, Equipment

Cost New:

Was:

Price Now:

$5,975.00

1 System Left
Amplifier Research 50W1000B 1 MHz - 1 GHz RF Power Amplifier

SKU: 10922

Frequency Range: 1 MHz - 1 GHz

Output Power: 50 W

Flatness: ±1.0 dB typical, ±1.5 dB maximum

Gain: 47 dB minimum (at max setting)

Imput Impedance: 50 ohms, VSWR 2.0:1 maximum

Output Impedance: 50 ohms nominal

Cost New:

Was:

Price Now:

$695.00

In Stock

Ordering Options
Fischer FCC F-120-6A BCI Injection Test Probe

SKU: 11811

Aperture: 40 mm

Connector type: Type-N

Test Standards: ISO 11452-4, IEC 61000-4-6 BCI, DO-160 Section 20, MIL-STD-461 CS114

Frequency Range: 10 kHz – 400 MHz

Input Power: 200 watts

Insertion loss: less than 7dB/700kHz - 200MHz

Rated Power: 100 CW

Applications: EMC BCI Tests, Military EMC Testing

Inquire for Availability

View Product Cart
Thermo Keytek E510A 10kV Surge Generator

SKU: 10799

Standards Met: ANSI/IEEE C62.41 Cat. B and IEC 61000 4-5

Phase synchronization: ±15° with optional coupler/decoupler

Pulse current (short circuit): 8/20µs, 0-5.05kA with 2 ohm effective source impedance, ±10%

Pulse repetition: 1 shot/18 seconds

Pulse voltage (open circuit): 1.2/50µs, 0-10.1kV ±10% in 1 volt steps

Repetition time: Adjustable from 300ms to 5s; 1ms resolution

Typically In Stock

View Product Cart
AH Systems TDS-535 Tuned Dipole Set, 25 MHz to 1 GHz, Receive and Transmit

SKU: 10742

Weight: 19 lbs.

Antennas: Dipole Antennas

Application/Test Type: precise EMI measurements

Connector: N-type (female)

Dimensions: Antenna Case: 28” x 23” x 7”

Frequency Range: 25 MHz - 1 GHz

Gain: Varies with Model

Impedance: 50 ohm

Inquire for Availability

View Product Cart
Amplifier Research 50T4G18, 50 Watts CW, 4.2–18GHz, (TWT) Microwave Amplifier

SKU: sku-717

Weight: 70 lbs, 32 kg

Dimensions: 19.8 x 6.5 x 27 in., 50.3 x 16.5 x 68.6 cm.

Flatness: ±10 dB maximum, 4.2 - 18 GHz

Frequency Range: 4.2–18GHz

Gain: GAIN (at maximum setting) ......47 dB minimum GAIN ADJUSTMENT (continuous range)......35 dB minimum

Impedance: 50 ohms

Input: 99-260 VAC

Output: POWER (fundamental), CW, @ OUTPUT CONNECTOR Nominal .60 watts Minimum..50 watts Linear @ 1dB Compression..10 watts minimum

RF Connector: Type N female

RF Input Voltage: 1.0 milliwatt maximum for rated output

View Product Cart
EM Test ACC Capacitive Coupling Clamp for ISO 7637 Automotive Testing

SKU: sku-635

Weight: 11.5 kg

Application/Test Type: Electrical Fast Transients for automotive applications

Cable Diameter: up to 40 mm (1.57 in)

Coupling Length: 1 m (39.4 in)

Dimensions: 1250 mm x 300 mm x 93 mm, L x W x H

RF Connector: High voltage connector,coaxial. GND connection 4 mm plug, banana

Standards Met: ISO 7637

Voltage Rating: up to 1.0 kV

Inquire for availability

View Product Cart
3ctest CCC100 EFT/Burst Coupling Clamp for IEC/EN 61000-4-4

SKU: 10621

Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)

Cable Diameter: up to 40 mm (1.57 in)

Coupling Length: 1 m (39.4 in)

Dimensions: 1040x140x110mm

EFT Coupling Clamps: as per IEC 61000-4-4

RF Connector: High voltage connector,coaxial. GND connection 4 mm plug, banana

Standards Met: IEC/EN 61000-4-4

Voltage Rating: up to 5.5kv

4 to 6 Weeks

View Product Cart
Haefely PSURGE 4010 Combination Wave Generator

SKU: 10574

Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

Coupling: Internal Single Phase/16 Amps at 264 VAC and 110 VDC -(expandable to 3-Phase with external module); 18uF and 9uF+10 Ω acc. to IEC 61000-4-5

Polarity: positive, negative, alternating

Pulse current (short circuit): 100 Amps to 2.1 kA

Pulse repetition: up to 12 per minute

Pulse voltage (open circuit): 200 Volts to 4.2 kV

Standards Met: IEC 61000-4-5, EN 61000-6-1, EN 61000-6-2

Industries: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

Applications: Immunity to Electrical Surges (Test Setup)

Typically In Stock

View Product Cart

Test Equipment, Systems & Solutions

Connect with The EMC Shop