EMC Test Equipment

(Showing 12 of 1211)
Show 12 24 36 48 96

EMC Test Equipment Categories

Transient Generators
Transient Generators
EMI Receivers/EMC Analyzers
EMI Receivers/EMC Analyzers
RF Power Amplifiers
RF Power Amplifiers
Electric Field Strength Measurement
Electric Field Strength Measurement
RF Conducted Immunity Test Systems
RF Conducted Immunity Test Systems
EMC Antennas
EMC Antennas
Line Impedance Stabilization Networks (LISN's)
Line Impedance Stabilization Networks (LISN's)
EMC Probes
EMC Probes
EM Coupling Clamps
EM Coupling Clamps
Coupling Decoupling Networks (CDN's)
Coupling Decoupling Networks (CDN's)
RF Current Probes/Monitors
RF Current Probes/Monitors
EMC/EMI Signal Generators
EMC/EMI Signal Generators
Calibration Equipment
Calibration Equipment
Software for EMC Testing
Software for EMC Testing

EMC Test Equipment Test Equipment, Systems & Solutions

  • Teseq CSP 9160A EMC Emission/Immunity Sensing Probe

    Teseq CSP 9160A EMC Emission/Immunity Sensing Probe

    SKU: 22137

    Top Frequency Range: 200 MHz
    Bottom Frequency Range: 9 kHz
    RF Current Handling (CW/Pulse): 50 Amps
    Style: Clamp On
    Diameter: 1"
    Transfer Impedance: <1 Ohms
    Test Standards: CISPR 16-1-2; CISPR 22; CISPR 25, CISPR 32; Mil-STD 461; RTCA/DO-160; EN 61000-6-3; EN 61000-6-4
    $390.00
    Typically In Stock
    ORDERING OPTIONS
  • PMM (Narda) RA01 Active Rod Antenna, 9 kHz - 30 MHz

    PMM (Narda) RA01 Active Rod Antenna, 9 kHz - 30 MHz

    SKU: 10044

    Weight: 1.5 kg (3.3 lbs)
    Antenna Factor (1 Meter): + 10 dB (+6dB for 1m monopole effective length normalization
    Antennas: Monopole Antennas
    Aperture: -
    Application/Test Type: Active, general-purpose, receive-only antenna for FCC, MIL-STD and TEMPEST tests
    Connector: BNC
    Dimensions: Rod: 1 meter by 16 mm diameter; Ground plane: 600 mm x 600 mm; Electronics: 150 mm x 135 mm x 120 mm
    Frequency Range: 9 kHz to 30 MHz (RA01); 150 kHz to 30 MHz (RA01HV) frequency range
    Impedance: 50 Ohms
    Mounting Base: 1/4" c 20 screw
    VIEW PRODUCT Cart
  • Com-Power LI-400 10 kHz - 10 MHz LISN for Mil-STD 461

    Com-Power LI-400 10 kHz - 10 MHz LISN for Mil-STD 461

    SKU: sku-19

    Weight: 14 lbs. / 6.3 kg
    Application/Test Type: Power line conducted emissions tests
    Current Rating: 25 Amps (AC), 17 Amps (DC)
    Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cm
    Frequency Range: 10 kHz to 10 MHz
    Inductors: 50 µH (air-core)
    Insertion Loss: 0.3 dB (150 kHz to 30 MHz)
    Mains & EUT Connections: Superior Electric SUPERCON® shrouded sockets
    RF Connector: 50Ω N-type (female)
    Standards Met: RTCA DO-160 / MIL-STD 461
    Voltage Rating: 270 VAC (Line to Ground), 380 VDC
    VIEW PRODUCT
  • EM Test EFT 500N5 Electrical Fast Transient/EFT/Burst Simulator

    EM Test EFT 500N5 Electrical Fast Transient/EFT/Burst Simulator

    SKU: 10693

    Test Capabilities: EFT Immunity
    Standards Met: IEC/EN 61000-4-4
    Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT
    Max EUT AC Voltage (w/ Built in CDN): 250 Volts
    Max EUT AC Current (w/ Built in CDN): 32 Amps
    Max EUT DC Voltage (w/ Built in CDN): 270 Volts
    Max EUT DC Current (w/ Built in CDN): 32 Amps
    EFT/Burst Pulse Output Capability: 4.8 kV
    External Coupling: Data Lines & 3 Phase EUT
    INQUIRE
    VIEW PRODUCT Cart
  • 3ctest CWS 600CT Combination Wave & Telecom Surge Simulator, 1.2/50us 8/20us 10/700us 5/320us

    3ctest CWS 600CT Combination Wave & Telecom Surge Simulator, 1.2/50us 8/20us 10/700us 5/320us

    SKU: sku-333

    Polarity: Positive, Negative or Alternate
    Weight: Approx 15 kg (33 lbs)
    Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5
    Counter: 1-999
    Coupling: Optional for external SPN series CDN's
    Dimensions: 19 inch/6u
    Frequency Range: 50/60Hz±5%
    Front Time: Voltage: 10us±20%, time to half value: 700us±20%;
    Impedance: 2 phm, Optional 12 ohm and 500 ohm
    Mains & EUT Connections: 4mm banana plug
    Output Current: Front time: 5us±20%, time to half value: 320us±20%
    Polarity-2: Positive, Negative and Alternating
    Pulse current (short circuit): 0.15 kA–3.0kA ±10% （2ohm）
    Pulse Duration: 11s-99s （shortest depends on test voltage）
    Pulse repetition: 1-999
    Pulse voltage (open circuit): 0.3kV–6.0kV ±10%
    RF Connector: BNC, 5VTTL
    Standards Met: UL 1449, ANSI C62.41, IEC 61000-4-5, EN & IEC 60255-5, GB/T 17626.5
    Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations
    Test duration: 6s-99s
    Test Voltage: 0.2kV–6.0kV,±10%
    Transfer Impedance: 15ohm, 40ohm （automatic switch)
    Voltage Rating: AC 110V/220V , ±10%,
    VIEW PRODUCT Cart
  • Teseq NSG 3150 Combination Wave Surge Generator for IEC/EN 61000-4-5 up to 15 kV

    Teseq NSG 3150 Combination Wave Surge Generator for IEC/EN 61000-4-5 up to 15 kV

    SKU: 10795

    Weight: Approx. 40 kg (88 lbs)
    Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5
    Coupling: IEC/external
    Dimensions: 449 (17.7”) x 328 (12.9”; 7 HU) x 565 mm (22.2”)
    Display Interface: 7“ touch-screen
    Impedance: 2/12 Ω
    Phase synchronization: asynchronous, synchronous 0 to 359º (in 1º steps)
    Polarity: pos / neg / alternate
    Pulse current (short circuit): ±250 A to 7.5 kA
    Pulse repetition: 20* .... 600 s (in 1 sec steps) 1 .... 10 min.
    Pulse voltage (open circuit): ±500 V to 15 kV (in 1 V steps)
    Supply Voltage: 85 to 265 VAC, 50/60 Hz
    Test duration: 1 to 9999 pulses, continuous
    Equipment Group: Combination Wave Generators
    VIEW PRODUCT Cart