EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  Agilent E7402A EMI Analyzer w/ Built In Limits for FCC, IEC, EN's Emissions Standards

  SKU: 10288

  Frequency range (dc coupled): 100 Hz - 3.0 GHz

  Applications: EMC Precompliance Testing, Conducted Emissions, Radiated Emissions

  In Stock

  VIEW PRODUCT Cart

• 

  Teseq ISN T2A Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

  SKU: sku-158

  Frequency Range: 150 kHz to 80 MHz

  RF Input Voltage: 15 V

  Cost New:

  Was:

  $2,130.00

  Price Now:

  $1,597.50

• 

  Teseq ProfLine 2145-208 Harmonics & Flicker Measuring System

  SKU: 11156

  Phase synchronization: 3

  Voltage Rating: 45 kv

  Dual Range VAC: 150 V and 300 V

  Dual Range VDC: 200 V and 400 V

  Weight: 522 kg

  Frequency Range: 16 Hz – 819 Hz

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Teseq CBL 6144 Ultra-broadband BiLog Antenna for Compact Chambers

  SKU: 10118

  Impedance: 50 Ohms

  Weight: approx. 6.5 kg

  Antenna Factor (1 Meter): 4 to 3 dB/m

  Antennas: Bilogical Antennas

  Application/Test Type: Ultra-broadband immunity antenna For compact chambers Reduced chamber coupling

  Connector: N type female

  Dimensions: (L x H x W in mm): approx. 1585 X 1570 X 670

  Frequency Range: 26 MHz to 3 GHz (useable to 20 MHz)

  Gain: 6 dB (200 MHz to 3 GHz) / 8 dB (700 MHz to 2.5 GHz)

  Impedance-2: 50 Ω

  Maximum Continuous Power: 600 Watts

  Standards Met: IEC/EN 61000-4-3,CISPR 13,CISPR 14-1,CISPR 16-1-4,CISPR 16-2-3,CISPR 22,CISPR 24,CISPR 32,EN 61000-6-1,EN 61000-6-2,EN 61000-6-3,EN 61000-6-4,IEC 60533,IEC 60601-1-2,IEC 61326,ISO 11452-2

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Teseq NSG 4070B Conducted & Radiated Immunity Test System

  SKU: 11159

  1 review

  Test Capabilities: RF Conducted Immunity

  Standards Met: IEC/EN 61000-4-6

  Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  CDN Test Levels (w/ built-in amplifier): None

  BCI Test Levels (w/ built-in amplifier): None

  Frequency Range (w/ built-in amplifier): 4 kHz - 1 GHz

  Videos: Calibration Example, Remote Operation Setup

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Com-Power LI-3P-132 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network

  SKU: sku-598

  Weight: 30 lbs.

  Application/Test Type: Power Line Conducted Emissions Tests

  Current Rating: 32 Amperes

  Frequency Range: 150 kHz to 30 MHz

  Inductors: 50 µH

  Insertion loss: less than 0.7 dB

  Isolation: more than 40 dB

  Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

  RF Connector: RF Measurement Port 50Ω - N-Type (female)

  Standards Met: ANSI C63.4, CISPR 16-1-2

  Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

  Cost New:

  Was:

  Price Now:

  $6,495.00

  ORDERING OPTIONS

• 

  Teseq ISN T4A Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

  SKU: sku-159

  Frequency Range: 150 kHz to 80 MHz

  RF Input Voltage: 15 V

  VIEW PRODUCT Cart

• 

  3ctest TSS-2430 Vehicle Mounted Multimedia Voltage Disturbance Simulation Generator

  SKU: sku-1688

  Test Standards: VW 80972

  Applications: Automotive EMC Testing

  Inquire

  VIEW PRODUCT Cart

• 

  Teseq UPA 6109 Log Periodic Antenna, 200 MHz to 1 GHz

  SKU: 11136

  Weight: approx. 1.5 kg

  Dimensions: (L x W in mm): approx. 100 X 750

  Frequency Range: 200 MHz to 1 GHz

  Impedance: 50 Ω

  RF Connector: N type female

  VSWR: less than 2:1

  Inquire

  VIEW PRODUCT Cart

• 

  AIF-100A Audio Isolation Transformer 30 Hz- 250 kHz

  SKU: sku-1947

  Discontinued

  VIEW PRODUCT Cart

• 

  Haefely DEC 6 Decoupling Network for Symmetrical Data and Control Lines

  SKU: 0481

  Weight: approx. 2 kg net

  Coupling: Decoupling elements Resistors 200 Ohm

  Dimensions: 30 x 20 x 16 cm (w x h x d)

  DUT current: Current on EUT lines max. 0.1A

  Pulse amplitude: max. 6.6kV

  Pulse Shape: 10/700us -5/320us 1.2/50us - 8/20us 100kHz ring wave

  Test Voltage: Voltage on EUT lines max. 72V DC or 50V AC,RMS (with gas arrestors as protection elements) max. 144V DC or 100V AC,RMS (with ABDs as protection elements)

  Cost New:

  Was:

  Price Now:

  $250.00 - $1,500.00

  In Stock

  ORDERING OPTIONS

• 

  Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

  SKU: 10161

  Weight: 550 grams (1800 grams with storage case)

  Application/Test Type: 1000BaseT and Power Over Ethernet (PoE) testing of 1 up to 4 pair(s) of unscreened balanced communication lines

  Common Mode Impedance: 150 Ω ±20 Ω

  Current Rating: 600 mA (line), 1200 mA (pair)

  Decoupling of Common Mode Disturbance: ≥35 dB to ≥55 dB/≥55 dB

  Dimensions: 10.5 cm x 6.5 cm x 11.0 cm (19.0 cm with adapter plugged in)

  Frequency Range: 150 kHz to 30 MHz

  Mains & EUT Connections: Adapter Set includes RJ11, RJ45, LCL and more.

  RF Connector: BNC 50 Ω

  RF Input Voltage: 15 V max

  Standards Met: CISPR 15; CISPR 16-1-2; CISPR 16-2-1;CISPR 22; CISPR 32; EN 61000-6-3; EN 61000-6-4

  Voltage Division Factor: 10 dB ±1 dB

  Voltage Rating: 63 Volts AC, 100 Volts DC (line to ground); Test Voltage: 200VDC, 2 seconds

  T

  VIEW PRODUCT Cart