EMC/EMI Test & Measurement Equipment - The EMC Shop

EMC Test Equipment Categories

Transient Generators

EMI Receivers/EMC Analyzers

RF Power Amplifiers

Electric Field Strength Measurement

RF Conducted Immunity Test Systems

EMC Antennas

Line Impedance Stabilization Networks (LISN's)

EMC Probes

EM Coupling Clamps

Coupling Decoupling Networks (CDN's)

RF Current Probes/Monitors

EMC/EMI Signal Generators

Calibration Equipment

Software for EMC Testing

EMC Test Equipment Test Equipment, Systems & Solutions

Com-Power LI-3P-132 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network

SKU: sku-598

Weight: 30 lbs.

Application/Test Type: Power Line Conducted Emissions Tests

Current Rating: 32 Amperes

Frequency Range: 150 kHz to 30 MHz

Inductors: 50 µH

Insertion loss: less than 0.7 dB

Isolation: more than 40 dB

Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

RF Connector: RF Measurement Port 50Ω - N-Type (female)

Standards Met: ANSI C63.4, CISPR 16-1-2

Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

Cost New:

Was:

Price Now:

$6,495.00

ORDERING OPTIONS
Teseq ISN T4A Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

SKU: sku-159

Frequency Range: 150 kHz to 80 MHz

RF Input Voltage: 15 V

VIEW PRODUCT Cart
3ctest TSS-2430 Vehicle Mounted Multimedia Voltage Disturbance Simulation Generator

SKU: sku-1688

Test Standards: VW 80972

Applications: Automotive EMC Testing

Inquire

VIEW PRODUCT Cart
Teseq UPA 6109 Log Periodic Antenna, 200 MHz to 1 GHz

SKU: 11136

Weight: approx. 1.5 kg

Dimensions: (L x W in mm): approx. 100 X 750

Frequency Range: 200 MHz to 1 GHz

Impedance: 50 Ω

RF Connector: N type female

VSWR: less than 2:1

Inquire

VIEW PRODUCT Cart
AIF-100A Audio Isolation Transformer 30 Hz- 250 kHz

SKU: sku-1947

Discontinued

VIEW PRODUCT Cart
Haefely DEC 6 Decoupling Network for Symmetrical Data and Control Lines

SKU: 0481

Weight: approx. 2 kg net

Coupling: Decoupling elements Resistors 200 Ohm

Dimensions: 30 x 20 x 16 cm (w x h x d)

DUT current: Current on EUT lines max. 0.1A

Pulse amplitude: max. 6.6kV

Pulse Shape: 10/700us -5/320us 1.2/50us - 8/20us 100kHz ring wave

Test Voltage: Voltage on EUT lines max. 72V DC or 50V AC,RMS (with gas arrestors as protection elements) max. 144V DC or 100V AC,RMS (with ABDs as protection elements)

Cost New:

Was:

Price Now:

$250.00 - $1,500.00

In Stock

ORDERING OPTIONS
Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

SKU: 10161

Weight: 550 grams (1800 grams with storage case)

Application/Test Type: 1000BaseT and Power Over Ethernet (PoE) testing of 1 up to 4 pair(s) of unscreened balanced communication lines

Common Mode Impedance: 150 Ω ±20 Ω

Current Rating: 600 mA (line), 1200 mA (pair)

Decoupling of Common Mode Disturbance: ≥35 dB to ≥55 dB/≥55 dB

Dimensions: 10.5 cm x 6.5 cm x 11.0 cm (19.0 cm with adapter plugged in)

Frequency Range: 150 kHz to 30 MHz

Mains & EUT Connections: Adapter Set includes RJ11, RJ45, LCL and more.

RF Connector: BNC 50 Ω

RF Input Voltage: 15 V max

Standards Met: CISPR 15; CISPR 16-1-2; CISPR 16-2-1;CISPR 22; CISPR 32; EN 61000-6-3; EN 61000-6-4

Voltage Division Factor: 10 dB ±1 dB

Voltage Rating: 63 Volts AC, 100 Volts DC (line to ground); Test Voltage: 200VDC, 2 seconds

T

VIEW PRODUCT Cart
PMM L3-64 3-Phase, 64 Amp LISN for FCC Part 15

SKU: 10057

Weight: 50 kg (110 pounds)

Application/Test Type: Ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under Test) may inject into the power line or mains.

Current Rating: 63 Amps Max

Dimensions: 465 x 450 x 740 mm (18 x 17.7 x 29 inches)

Frequency Range: 9 kHz to 30 MHz

Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke

Mains & EUT Connections: 63 A IEC connector

RF Connector: BNC (f)

Standards Met: CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F

Voltage Rating: 230 Volts AC, 325 Volts DC (Line to Power Earth and Neutral to Power Earth); 400 Volts AC, 565 Volts DC (line to line and line to neutral)

CISPR 16-1-2: Yes

DO-160F: Yes

CISPR 22: Yes

FCC: Yes

ANSI C63.4: Yes

VIEW PRODUCT Cart
Schwarzbeck CS-50 Unsymmetrical Splitter

SKU: sku-1229

VIEW PRODUCT Cart
Schwarzbeck NNHV 8123-200 CISPR25 Artificial Mains Network (AMN)

SKU: 21156

Applications: Conducted Emissions, BCI Testing , Automotive EV EMC

Test Standards: CISPR 25, MIL-STD-461, ISO 7637

Max EUT DC Voltage: 1,000 Volts

Max EUT Current: 200 Amps

Max EUT AC Voltage (60Hz/400Hz): 400V/300V

Inductance: 5 µH

Typically In Stock

VIEW PRODUCT Cart
IFI M50 10 kHz to 230 MHz, 50 Watt CW RF Amplifier

SKU: sku-831

Max Frequency: 220 MHz

Min Frequency: 10 kHz

Output Power: 50 Watts

Applications: RF Conducted Immunity, Medical

Standards: IEC 61000-4-6, MIL-STD 461 CS114

AC Input Power: 100-240V/1PH/500VA

Gain: 47dB

VIEW PRODUCT Cart
3ctest SEPN Series CDN's for Surge & Burst, Single Phase 3-wire, Three Phase 5-wire

SKU: sku-561

Polarity: +/-

Weight: approx. 50Kg

Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

Burst frequency: 0.1kHz–1000kHz

Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

Dimensions: 19 inch/6U

Impedance: 2 ohm (output)

Oscillation Frequency: Current waveform: Front time: 8us±20%, time to half value: 20us±20%

Polarity-2: +/-/alternative

Pulse amplitude: 0.25 kV -4.8kV, ± 10%

Pulse current (short circuit): 0.1kA–3kA，±10%

Voltage: 0.2kV–6kV，±10%

VIEW PRODUCT Cart