EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  Haefely DEC 6 Decoupling Network for Symmetrical Data and Control Lines

  SKU: 0481

  Weight: approx. 2 kg net

  Coupling: Decoupling elements Resistors 200 Ohm

  Dimensions: 30 x 20 x 16 cm (w x h x d)

  DUT current: Current on EUT lines max. 0.1A

  Pulse amplitude: max. 6.6kV

  Pulse Shape: 10/700us -5/320us 1.2/50us - 8/20us 100kHz ring wave

  Test Voltage: Voltage on EUT lines max. 72V DC or 50V AC,RMS (with gas arrestors as protection elements) max. 144V DC or 100V AC,RMS (with ABDs as protection elements)

  Cost New:

  Was:

  Price Now:

  $250.00 - $1,500.00

  In Stock

  ORDERING OPTIONS

• 

  Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

  SKU: 10161

  Weight: 550 grams (1800 grams with storage case)

  Application/Test Type: 1000BaseT and Power Over Ethernet (PoE) testing of 1 up to 4 pair(s) of unscreened balanced communication lines

  Common Mode Impedance: 150 Ω ±20 Ω

  Current Rating: 600 mA (line), 1200 mA (pair)

  Decoupling of Common Mode Disturbance: ≥35 dB to ≥55 dB/≥55 dB

  Dimensions: 10.5 cm x 6.5 cm x 11.0 cm (19.0 cm with adapter plugged in)

  Frequency Range: 150 kHz to 30 MHz

  Mains & EUT Connections: Adapter Set includes RJ11, RJ45, LCL and more.

  RF Connector: BNC 50 Ω

  RF Input Voltage: 15 V max

  Standards Met: CISPR 15; CISPR 16-1-2; CISPR 16-2-1;CISPR 22; CISPR 32; EN 61000-6-3; EN 61000-6-4

  Voltage Division Factor: 10 dB ±1 dB

  Voltage Rating: 63 Volts AC, 100 Volts DC (line to ground); Test Voltage: 200VDC, 2 seconds

  T

  VIEW PRODUCT Cart

• 

  PMM L3-64 3-Phase, 64 Amp LISN for FCC Part 15

  SKU: 10057

  Weight: 50 kg (110 pounds)

  Application/Test Type: Ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under Test) may inject into the power line or mains.

  Current Rating: 63 Amps Max

  Dimensions: 465 x 450 x 740 mm (18 x 17.7 x 29 inches)

  Frequency Range: 9 kHz to 30 MHz

  Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke

  Mains & EUT Connections: 63 A IEC connector

  RF Connector: BNC (f)

  Standards Met: CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F

  Voltage Rating: 230 Volts AC, 325 Volts DC (Line to Power Earth and Neutral to Power Earth); 400 Volts AC, 565 Volts DC (line to line and line to neutral)

  CISPR 16-1-2: Yes

  DO-160F: Yes

  CISPR 22: Yes

  FCC: Yes

  ANSI C63.4: Yes

  VIEW PRODUCT Cart

• 

  Schwarzbeck CS-50 Unsymmetrical Splitter

  SKU: sku-1229

  VIEW PRODUCT Cart

• 

  Schwarzbeck NNHV 8123-200 CISPR25 Artificial Mains Network (AMN)

  SKU: 21156

  Applications: Conducted Emissions, BCI Testing , Automotive EV EMC

  Test Standards: CISPR 25, MIL-STD-461, ISO 7637

  Max EUT DC Voltage: 1,000 Volts

  Max EUT Current: 200 Amps

  Max EUT AC Voltage (60Hz/400Hz): 400V/300V

  Inductance: 5 µH

  Typically In Stock

  VIEW PRODUCT Cart

• 

  IFI M50 10 kHz to 230 MHz, 50 Watt CW RF Amplifier

  SKU: sku-831

  Max Frequency: 220 MHz

  Min Frequency: 10 kHz

  Output Power: 50 Watts

  Applications: RF Conducted Immunity, Medical

  Standards: IEC 61000-4-6, MIL-STD 461 CS114

  AC Input Power: 100-240V/1PH/500VA

  Gain: 47dB

  VIEW PRODUCT Cart

• 

  3ctest SEPN Series CDN's for Surge & Burst, Single Phase 3-wire, Three Phase 5-wire

  SKU: sku-561

  Polarity: +/-

  Weight: approx. 50Kg

  Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

  Burst frequency: 0.1kHz–1000kHz

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Dimensions: 19 inch/6U

  Impedance: 2 ohm (output)

  Oscillation Frequency: Current waveform: Front time: 8us±20%, time to half value: 20us±20%

  Polarity-2: +/-/alternative

  Pulse amplitude: 0.25 kV -4.8kV, ± 10%

  Pulse current (short circuit): 0.1kA–3kA，±10%

  Voltage: 0.2kV–6kV，±10%

  VIEW PRODUCT Cart

• 

  Rent Rohde & Schwarz ESU40 EMI Test Receiver for CISPR and MIL-STD Testing

  SKU: 30082

  Frequency Range: 20 Hz to 40 GHz (DC coupled), 10 MHz to 40 GHz (AC coupled)

  Frequency Resolution: 0.01 Hz

  Frequency Counter Resolution: 0.1 Hz to 10 kHz

  Test Standards: CISPR 16-1-1, MIL-STD-461

  Applications: Conducted Emissions, Radiated Emissions

  Inquire for Lead Time

  VIEW PRODUCT Cart

• 

  Teseq ISN S501A Impedance Stabilization Network for Coaxial Lines

  SKU: sku-171

  Weight: approx. 1.5 kg

  Dimensions: (W x H x D): 100 mm x 100 mm x 240 mm

  Frequency Range: 150 kHz to 230 MHz

  Impedance: 150 Ω ±20 Ω

  RF Input Voltage: 20 V

  VIEW PRODUCT Cart

• 

  TWT18G-250 8 GHz - 18 GHz, 250 Watt RF CW Amplifier

  SKU: sku-2218

  Weight: 75 lbs

  Dimensions: 19W x 25D x 8.75H

  Frequency range: 8.0 – 18.0 GHz

  Gain: 54 dB

  Rated Power: 250 watts

  VIEW PRODUCT Cart

• 

  Schwarzbeck ISN S8 Impedance Stabilization Network

  SKU: 8857

  Connector to EUT: RJ45 connector | CAT 6 Cable

  Max Voltage Handling: 150 VDC | 100 VAC

  Max Current Handling: 1 Amp

  Standards Met: CISPR 22, CISPR 32, EN 55022

  Application: Shielded Data Lines Conducted Emissions Measurements

  Cost New:

  Was:

  Price Now:

  $1,800.00

  In Stock

• 

  PLA1M Passive Shielded Loop Antenna, 20 Hz - 1 MHz

  SKU: 12109

  Weight: 2.5 LBs

  Diameter: 22 3/8"

  Frequency Range: 20 Hz to 1 MHz

  RF Connector: BNC, Female

  Cost New:

  Was:

  Price Now:

  $1,895.00

  Inquire for Availability