EMC/EMI Test & Measurement Equipment - The EMC Shop

EMC Test Equipment Categories

Transient Generators

EMI Receivers/EMC Analyzers

RF Power Amplifiers

Electric Field Strength Measurement

RF Conducted Immunity Test Systems

EMC Antennas

Line Impedance Stabilization Networks (LISN's)

EMC Probes

EM Coupling Clamps

Coupling Decoupling Networks (CDN's)

RF Current Probes/Monitors

EMC/EMI Signal Generators

Calibration Equipment

Software for EMC Testing

EMC Test Equipment Test Equipment, Systems & Solutions

Schwarzbeck FMZB 1519 B Active Receive Loop Antenna

SKU: 30112

Frequency Range: 9 kHz – 30 MHz

Antenna Factor for fict. E-field Strength: 20 dB/m

Antenna Factor for H-field Strength: -31.5 dB/Ωm

Loop Diameter: 0.5 m

Applications: Antenna Pattern Measurement

Inquire for Availability

VIEW PRODUCT Cart
Rigol EMI Precompliance Test Equipment Bundle

SKU: 11165

Applications: EMC Precompliance Testing, Conducted Emissions, Radiated Emissions

Limit Lines: CISPR 11, MIL-STD-461, FCC Part 15 and more

Bundle Includes: DSA710, EMI-DSA800, NFP-3, S1210 EMIs, interconnect cables

Frequency Range: 100 kHz to 1 GHz

Cost New:

Was:

Price Now:

$259.00 - $1,295.00

Typically In Stock

ORDERING OPTIONS
Radiated Emissions Testing Equipment for FCC, MIL and More

SKU: sku-1164

Generic Standards: IEC 61000-6-3, IEC 61000-6-4

VIEW PRODUCT Cart
Rohde & Schwarz Precompliance EMI Emissions Test Equipment Package

SKU: sku-1125

Applications: EMC Precompliance Testing, Conducted Emissions, Radiated Emissions

Limit Lines: CISPR 11, MIL-STD-461, FCC Part 15 and more

In stock

VIEW PRODUCT Cart
3ctest CWS X00G/SPN 38XXT Combination Wave Surge Simulator CWS

SKU: sku-1094

VIEW PRODUCT Cart
3ctest EFT 500G / EFTN 15100T High Voltage High-Power Intelligent EFT/Burst

SKU: sku-1092

VIEW PRODUCT Cart
EM Test CNV 504 Coupling/Decoupling Network

SKU: 30017

Test Standards: IEC 61000-4-5

Applications: Data lines Unshielded, Symmetrical Surge Immunity

Inquire for Availability

VIEW PRODUCT Cart
IFI EFG-3 E-Field Generating Antenna 1000 Watts

Test Standards: MIL-STD-461 RS103, DO-160

Built in Load: No

Frequency Range: 10 kHz - 220 MHz

Input Impedance: 50 ohms nominal

Applications: Radiated Susceptibility

Output Port Impedance: 50 ohms nominal

Power Handling Capability: 1000 Watts CW

CALL FOR LEAD TIME

VIEW PRODUCT Cart
Teseq CDN S751A 75 Ohm BNC RF Coupler for IEC 61000-4-6 Testing

SKU: sku-851

Weight: 1.5 kg (3.3 lbs)

Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω

Current Rating: 1000 mA maximum

Decoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)

Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)

Frequency Range: 150 kHz to 230 MHz

Mains & EUT Connections: BNC 75 Ω

RF Connector: BNC 75 Ω

RF Input Voltage: 20 Volts Max

Standards Met: IEC 61000-4-6

Voltage Division Factor: 10 dB ±1 dB to 80 MHz, 10 dB +3, -2 dB from 80 MHz to 230 MHz

Voltage Rating: AC max. voltage (line to ground): 250V; DC max. voltage (line to ground): 400 V; Test voltage: 200 V - 750 V DC, 2 sec (refer to data sheet for exact model specifications)

Cost New:

Was:

Price Now:

$1,245.00
Com-Power LI-3P-200 Series 3-Phase LISN's with 50/250 uH Inductor, FCC/EN/CISPR, up to 100 A, 150 kHz - 30 MHz

SKU: sku-603

Weight: 27.5 lbs.

Application/Test Type: Power Line Conducted Emissions Tests

Current Rating: up to 100 Amperes

Dimensions: 19.3” x 13.9” x 2.3"

Frequency Range: 9 kHz to 30 MHz

Inductors: 50 µH or 250 µH

Insertion loss: less than 0.7 dB

Isolation: more than 40 dB

Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

RF Connector: RF Measurement Port 50Ω - N-Type (female)

Standards Met: ANSI C63.4, CISPR 16-1-2

Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

VIEW PRODUCT Cart
Teseq NSG 3060-ITU Transient Generator for Surge, Telecom, EFT/Burst, IEC and ITU-T.K

SKU: 10406

Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations

Standards Met: IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11, IEC/EN 61000-4-29

Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

Max EUT AC Voltage (w/ Built in CDN): 264 Volts

Max EUT AC Current (w/ Built in CDN): 16 Amps

Max EUT DC Voltage (w/ Built in CDN): 220 Volts

Max EUT DC Current (w/ Built in CDN): 10 Amps

Peak inrush current capability: 500 A (at 230 V)

EFT/Burst Pulse Output Capability: ±200 V to 4.8 kV (in 1 V steps) - open circuit±100 V to 2.4 kV ±100 A to 2.2 kA

Combination/Wave Surge Output Capability: ±200 V to 4.4 kV (in 1 V steps)

Phase synchronization: asynchronous, synchronous 0 to 359º (in 1º steps)

Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations

Inquire for Availability

VIEW PRODUCT Cart
Rent Noiseken CA-805B Coupling Adapter for Noise Injection

SKU: 30079

Weight: Approx. 3 kgs

Dimensions: (W)350 x (H) 120x (D)130 mm

Input Voltage: 400 V Max.

Clamp Interim: 26 mm

Coupling Ratio: 1:1

Applications: Conducted Emissions, Radiated Emissions

Typically in Stock

VIEW PRODUCT Cart