INQUIRE
EMC Test Equipment Categories
EMC Test Equipment Test Equipment, Systems & Solutions
-
-
-
Com-Power LI-3P-263 9kHz – 30MHz Three Phase LISN for CISPR / ANSI
SKU: 11894
Weight: 27.5 lbs.Application/Test Type: Power Line Conducted Emissions TestsCurrent rating: 63 AmperesDimensions: 19.3” x 13.9” x 2.3″Frequency Range: 9 kHz – 30 MHzInductors: 50 µHInsertion loss: less than 0.7 dBIsolation: more than 40 dBMains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power JackRF Connector: RF Measurement Port 50Ω – N-Type (female)Standards Met: ANSI C63.4, CISPR 16-1-2Typically In Stock -
Fischer F-55 Current Emissions Probe, 10 kHz – 500 MHz, 350 Amps
SKU: 0812
Aperture: 32 mmConnector type: Type-NDimensions: Internal diameter: 32 mm External diameter: 71 mm Height: 19 mmFrequency Range: 10 kHz - 500 MHzApplications: RF Current Monitoring, EMC BCI Tests, Military EMC TestingTest Standards: DO-160 Section 20, MIL-STD-461Typically In Stock -
3ctest EFTN CDN for Burst, Three Phase 5-wire, AC 380V, 32A, Max 440V
SKU: sku-564
Weight: approx. 50KgBurst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4Burst frequency: 0.1kHz–1000kHzDimensions: 19 inch/6UExternal: External control: 25Pin D-BusPhase synchronization: 0° - 360°, 1° step or randomPolarity: +/-Pulse amplitude: 0.25 kV -4.8kV, ± 10%Inquire for Availability -
Agilent (HP) 84115EM EMC Precompliance Test System
SKU: 11418
Applications: EMC Precompliance Testing, Conducted Emissions, Radiated EmissionsTypically In Stock -
Fischer Custom Communications F-61 Current Monitor Probe, 1 MHz - 1 GHz
SKU: 4565
AC Current Handling (DC-400Hz): 200 AmpsRF Current Handling (CW/Pulse): 20/50 AmpsStyle: Clamp On (Fixed Window)Inner Diameter: 32 mmTransfer Impedance: 22 Ω ± 2 dB from 100 MHz to 900 MHzTest Standards: MIL-STD-461 CE101Frequency Range: 1 MHz to 1 GHz$325.00 - $475.00In Stock -
Haefely IP4A Coupling Clamp for EFT/Burst Immunity on Data Lines
SKU: 2551
Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)Max. Cable Diameter: 40 mm (at least 1m length)Standards Met: IEC 61000-4-4Test Voltage: up to 8 kV$195.00 - $1,975.00Typically In Stock -
Teseq ISN T8-Cat6 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs
SKU: 11163
Frequency Range: 150 kHz to 80 MHzImpedance: 150 Ω ±20 ΩRF Input Voltage: 15V -
Teseq UPA 6192 Bilog Antenna for Precompliance RF Immunity & Emissions Testing
SKU: 10120
Impedance: 50 ΩWeight: approx. 2 kg3dB Beamwidth (E-Field): 100° at 30 MHz; 70° 200 MHz to 2000 MHz3dB Beamwidth (H-Field): 150° 200 MHz to 2000 MHzAntenna Factor (1 Meter): 30 MHz: 20 dB/m; 60 MHz: 8 dB/m; 300 MHz: 14 dB/m; 500 MHz: 18 dB/m; 1000 MHz: 24 dB/m; 2000 MHz: 30 dB/mAntennas: Bilogical AntennasApplication/Test Type: Precompliance RF Immunity & Emissions TestingConnector: N type femaleDimensions: (L x W x H in m): approx. 0.92 X 1.26 x 0.6Frequency Range: 30 MHz to 2000 MHzGain: 6 dB (above 150 MHz)Impedance-2: 50 ΩMaximum Continuous Power: 200 WattsStandards Met: CISPR 14-1, CISPR 16-1-4, CISPR 16-2-3, CISPR 22, CISPR 32,IEC 61000-6-3, IEC 61000-6-4VSWR: 1.5:1Inquire for Availability -
Amplifier Research 10W1000BM3 RF Amplifier 500 kHz to 1 GHz
SKU: 8796
Frequency Range: 500 kHz to 1 GHzOutput Power: 10 watts min., 18 watts nominalInput for Rated Output: 1.0 milliwatt max.Gain: 40 dB minimumApplications: Radiated ImmunityTest Standards: IEC 61000-4-3In Stock -
EN/ETSI ISN 303417 ISN for WPT (Wireless Power Transmission) Systems
SKU: 34159
Test Standards: CISPR 24, CISPR 32, CISPR 16-1-2 Annex ECable Type: Cat 6 (Cat 3 and Cat 5 with add-on module)Data Speed: 10GBASE-TCompliant to: CISPR 22, Appendix D, Fig. D.3In Stock