EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  Com-Power ISN-T8 Impedance Stabilization Network 150 kHz to 30 MHz

  SKU: 30151

  Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]

  Current Rating: 800 mA (per line), 1.6 Amps (per pair)

  Dimensions: see photo in images

  Frequency Range: 150 kHz to 30 MHz

  Isolation: 150 kHz to 1.5 MHz: 35 to 55 dB 1.5 MHz to 30 MHz: 55 dB

  Mains & EUT Connections: D-sub 25 pin female connectors

  RF Connector: 50Ω N-type (female)

  Standards Met: CISPR 16-1-2, CISPR 22

  Voltage Rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)

  Cost New:

  Was:

  Price Now:

  $410.00 - $4,100.00

  Typically in Stock

  ORDERING OPTIONS

• 

  EM Test UCS500N7 Multifunctional Transient Immunity Simulator

  SKU: sku-241

  Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations

  EMC Standards: IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11

  Test Setup Guides: Electrical Transient and Noise, Surge Immunity, Power Failures

  EFT/Burst Pulse Output Capability: ±200 V to 4.8 kV (in 1 V steps) - open circuit±100 V to 2.4 kV ±100 A to 2.2 kA

  Combination/Wave Surge Output Capability: 250 V - 6,000 V ± 10%

  External Coupling: Data Lines (EFT & Surge), 3PH EUT

  Phase synchronization: 0° - 360°, resolution 1° (16 - 500Hz)

  Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

  Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Tomco RF Amplifier BT01000-AlphaS .1 MHz - 30MHz

  SKU: sku-2308

  Max Frequency: 30 MHz

  Min Frequency: 100 kHz

  Output Power: 800 Watts Pulse

  Applications: Particle, Plasma, Magnetic, Radar, NMR, MRI, EPR, ESR,ENDOR and NQR

  AC Input Power: 110-240V/1PH/1kVA

  Gain: 60dB

  VIEW PRODUCT Cart

• 

  SteppIR SYS3-EMC E-Field Generator 20 MHz - 300 MHz, 200 V/m

  SKU: sku-2122

  Connector: N-Type, female

  Frequency Range: 20 MHz to 330 MHz

  Impedance: 50 ohm

  Max Radiated Field Strength: 200 V/m

  Standards Met: MIL 461

  VIEW PRODUCT Cart

• 

  Teseq CDN 3425 Burst/EFT Coupling Clamp

  SKU: sku-1065

  Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)

  Compatible Impulse Generators: Any EFT/Burst Generators (custom HV cable may be required)

  Standards Met: IEC / EN 61000-4-4

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Amplifier Research (AR) FL7006 Electric Field Probe Kit, 100 kHz - 6 GHz

  SKU: 57543

  Application/Test Type: Monitoring Electric Field Strengths

  Field Strength Range: 0.5 to 800 V/m (0.01 V/m)

  Frequency Range: 100 kHz to 6 GHz

  Standards Met: IEC/EN 61000-4-3

  Interfaces: USB, IEEE-488 (GPIB), RS-232 (serial), Fiber-Optic Serial

  Battery Life: 60-80 hours

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Fischer Custom Communications FCC F-120-1 Bulk Current Injection Probe

  SKU: 11268

  Aperture: 40 mm (1.57 inches)

  Insertion Loss: Less than 16dB / 5MHz - 80MHz

  Maximum Continuous Power: 100 Watts (for 30 minutes)

  RF Connector: N-type (f)

  Fre: 10 kHz - 175 MHz

  Standards Met: IEC 61000-4-6

  Applications: Bulk Current Injection BCI Testing, RF Conducted Immunity Testing

  Cost New:

  Was:

  Price Now:

  $295.00 - $3,950.00

  In Stock

  ORDERING OPTIONS

• 

  Fischer FCC-TLISN-T4-02 CISPR 22 Impedance Stabilization Network (ISN)

  SKU: 484

  Application/Test Type: Measuring conducted emissions on two balanced pair telecom ITE’s.

  Common Mode Impedance: 150 ± 20Ω

  Current Rating: 250 mA Maximum

  Decoupling of Common Mode Disturbance: 35 dB min. to 150 kHz; 55 dB min up to 30 MHz

  Frequency Range: 150 kHz to 30 MHz

  Mains & EUT Connections: D-sub 25 female

  RF Connector: 50Ω BNC female

  Voltage Division Factor: 9.5 dB ±1 dB

  Voltage Rating: 63 VAC RMS, 100 VDC

  Test Standards: CISPR 22 (ISNs)

  Cost New:

  Was:

  Price Now:

  $395.00 - $2,750.00

  In Stock

  ORDERING OPTIONS

• 

  Teseq CDN 3083-Burst 1000 Volt, 100-200 Amp Coupler for EFT/Burst

  SKU: sku-221

  Weight: 11 kg (24 lbs)

  Application/Test Type: EFT/Burst immunity testing of equipment requiring large currents, specially designed for heavy industry, smart grid and electro vehicle applications.

  Current Rating: 100 Amp or 200 Amp continous depending on model

  Compatible Impulse Generators: Any EFT/Burst Generators (custom HV cable may be required)

  Mains & EUT Connections: SHV; Screw terminals, rated for 200 A

  Standards Met: IEC / EN 61000-4-4 up to 8.8 kV

  Voltage Rating: 690 V AC RMS; 1000 VDC

  Cost New:

  Was:

  Price Now:

  $395.00 - $495.00

  In Stock

  ORDERING OPTIONS

• 

  Empower BBS3K5OKO RF Power Amplifier

  SKU: 6212

  Frequency Range: 500 MHz - 2700 MHz

  Output Power: 100 W

  Cost New:

  Was:

  Price Now:

  $10,095.00

  Typically In Stock

  ORDERING OPTIONS

• 

  Rent Com-Power AH-118 Horn Antenna 700 MHz - 18 GHz

  SKU: sku-690

  Weight: 3 lbs. [1.4 kg]

  Antenna Factor (1 Meter): 26.4 to 47.4 (average: 38.9) [dB(m-1)]

  Antennas: Double Ridge Guide Horn Antenna

  Connector: Precision N-type (female)

  Dimensions: 5.6” x 9.5” x 8.1”[14.2 x 24.1 x 20.6 cm]

  Frequency Range: 1 GHz to 18 GHz (useable from 700 MHz)

  Gain: 3.6 to 12.6 (average: 9.1) dBi

  Impedance: 50 Ohms

  Maximum Continuous Power: 300 Watts

  VSWR: 1.58 to 3.32 (average: 2.25) :1

  Cost New:

  Was:

  Price Now:

  $319.00

  Inquire for Availability

  ORDERING OPTIONS

• 

  Teseq NSG 1007 Programmable AC and DC Power Sources for IEC 61000-3-2 and -3-3

  SKU: 11494

  Test Standards: IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11

  Application/Test Type: Medical Device EMC Testings

  Inquire for Availability

  VIEW PRODUCT Cart