EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  DRHA44G Dual Ridge Horn Antenna 6 GHz to 44 GHz

  SKU: 8355

  Frequency Range: 6 GHz to 44 GHz

  Gain: 14 dBi

  Polarization: Linear and Circular

  Return Loss: 14 dB

  Max Power Handling: 10 W (CW)

  Connector: Coaxial 2.4 mm female

  Weight: 1.5 oz

  Test Standards: ANSI C63.4

  Applications: Antenna Pattern Measurement, Radiated Emissions

  Cost New:

  Was:

  Price Now:

  $600.00 - $6,000.00

  In Stock

  ORDERING OPTIONS

• 

  SGHA2.6G Standard Gain Horn Antenna

  SKU: 8452

  Frequency Range: 1.7 GHz - 2.6 GHz

  Applications: Antenna Pattern Measurements

  Gain, Typ (dBi): 15

  VSWR, Typ: 1.25:1

  Connector: N Type Female

  Cost New:

  Was:

  Price Now:

  $320.00 - $3,200.00

  In Stock

  ORDERING OPTIONS

• 

  Teseq CDN ST08 Coupling Decoupling Network

  SKU: 8413

  Frequency Range: 10 kHz to 80 MHz

  Application: CDN for screened eight lines with RJ45 connector

  Current Rating: 1000 mA

  EUT Connector: BNC 50 Ω

  Common mode impedance (EUT Port) 10 kHz to 26 MHz: 150 Ω ±20 Ω

  Common mode impedance (EUT Port) 26 MHz to 80 MHz: 150 Ω +60 Ω /-45 Ω

  RF Voltage: <20 V

  Cost New:

  Was:

  Price Now:

  $1,600.00

  Typically in Stock

• 

  NoiseKen LSS-F03-C3A Lightning Surge Simulator

  SKU: 8477

  Condition: 10 - Basically brand new

  Combination/Wave Surge Output: 0.5 - 15 kV

  Line for EUT: 2 lines / 4 lines DC 50 V / 100 mA MAX

  Weight: 750 lbs

  Coupling: AC/DC lines CDN, and Telecom lines CDN

  Polarity: Positive/Negative

  Dimensions: (W)555 x (H)1800 x (D)790

  Standards Met: IEC 61000-4-5

  In Stock

  VIEW PRODUCT Cart

• 

  CST1 ESD Current Target Calibration Kit DC - 4 GHz, 30 kV

  SKU: 8539

  Frequency Response: DC – 4 GHz S21 < ± 0.5 dB up to 1 GHz, < ± 1.2 dB up to 4 GHz

  Input resistance: 1.00 Ohm - ± 1% 1.00 Ohm when match with 50 Ohm load

  Max. IEC Pulse Amplitude: Verified up to ± 30 kV

  Voltage Non-linearity: < 2% up to 20 kV, < 5% up to ± 30 kV

  Standards: IEC 61000-4-2, ISO 10605, and many more

  Applications: Electrostatic Discharge Immunity Test

  Cost New:

  Was:

  Price Now:

  $475.00 - $5,940.00

  In stock

  ORDERING OPTIONS

• 

  Keysight (Agilent) N9010B EXA Signal Analyzer 10 Hz – 26.5 GHz

  SKU: 8317

  Frequency Range: 10 Hz to 26.5 GHz

  Range: 0 Hz (zero span), 10 Hz to maximum frequency of instrument

  Resolution: 2 Hz

  Sweep Time Range: Span ≥ 10 Hz = 1 ms to 4000 s

  Resolution Bandwidth: 1 Hz to 3 MHz (10 % steps), 4, 5, 6, 8 MHz

  Options: 526, B25, B40, DP2, EP5, FS1, FS2, P26, PFR, 1FP

  Cost New:

  Was:

  Price Now:

  $1,945.00

  In Stock

  ORDERING OPTIONS

• 

  Amplifier Research 150W1000M5 80 MHz - 1 GHz

  SKU: 8181

  Frequency Range: 80 MHz - 1 GHz

  Output Power: 150 W

  Flatness: ±2.0 dB maximum; 1.5 dB typical; ±0.8 dB with internal leveling

  Gain: 52 dB minimum

  Input Impedance: 50 Ω VSWR 2.0:1 maximum

  Output Impedance: 50 Ω nominal

  RF Power Display: 0-200 Watts

  Applications: Radiated Immunity

  Cost New:

  Was:

  Price Now:

  $1,760.00 - $22,000.00

  Typically in Stock

  ORDERING OPTIONS

• 

  SS18G-10 Solid State High Power Amplifier 1 - 18 GHz

  SKU: 7312

  Frequency Range: 1 - 18 GHz

  Gain: 40 / 44 ±4

  Line Power: 400 VA

  Weight: 14 kg

  Input Power: 0 dBm (1 mW) max.

  RF Input: SMA-f

  RF Output: SMA-f

  Applications: Radiated Immunity Testing, Shielding Effectiveness Testing

  Equipment Group: Solid State Microwave Power Amplifiers

  Test Standards: IEEE 299, MIL-STD-461 RS103, DO-160 Section 20

  Cost New:

  Was:

  Price Now:

  $52,500.00

  IN STOCK

• 

  SS6G-100 Solid State High Power Amplifier

  SKU: 8221

  Frequency Range: 1 GHz - 6 GHz

  RF Input Power: 0 dBm (1 mW) max

  Gain: 53 dB typ (50 dB min)

  Applications: Radiated Immunity Testing

  Test Standards: IEC/EN 61000-4-3, MIL-STD-461 RS103, DO-160 Section 20, SAE J113/4

  AC Input Power: 200 - 240 VAC, 1050 Watts

  RF Connectors: N(f)

  Weight: 48 LBs

  2nd Harmonics: 15 dBc

  3rd Harmonics: 20 dBc

  In Stock

  VIEW PRODUCT Cart

• 

  PAM3M Antenna Stand

  SKU: sku-6978

  Antenna height adjustable manually: 1.0 - 3.0 m

  Load capability max: 15 kg

  Mast cross-section: 60 mm x 60 mm

  Material of antenna stand: Plastic and reinforced fiberglass

  Cost New:

  Was:

  Price Now:

  $8,995.00

  Typically In Stock

  ORDERING OPTIONS

• 

  RESA26G Spectrum Analyzer for EMI Measurements

  SKU: 14387

  Frequency Range: 9 kHz - 26.5 GHz

  Frequency Resolusion: 1 Hz

  Real Time Bandwidth: 25 MHz (40 MHz Optional)

  Range: 0 Hz (Zero Span), 100 Hz to Max Frequency

  EMI bandwidth (-6dB): 200 Hz, 9 kHz, 120 kHz, 1 MHz (in accordance to CISPR16-1-1)

  App Note: Differences Between EMI Test Receivers and Spectrum Analyzers

  Limit Standards: EN550xx, GB9254, FCC Part15, User defined

  Detectors: Peak, Voltage Average, Quasi-Peak (following CISPR 16-1-1)

  EMC Compliance Standards: CISPR 16-1-1

  Testing Type: EMC Precompliance Testing,

  In Stock

  VIEW PRODUCT Cart

• 

  Conducted Emissions Test Setup

  SKU: 7077

  Applications: Conducted emissions testing on power and data lines, CE Marking

  Test Standards: IEC 61000-4-7, IEC 61000-4-30, IEC-61000-4-19, CISPR 11, CISPR 25, CISPR 32, FCC Part 15, MIL-STD 461, ANSI C63.4, DO-160 and more

  Measurement Range: 1 kHz - 1 GHz (150 kHz - 30 MHz typical)

  Power Handling: up to 1,000 Volts and 1,000 Amps

  OEM Measurement Receivers Available: Rohde & Schwarz, Keysight, Siglent, Rigol, PMM, Amplifier Research, Frankonia

  OEM LISN's Available: Schwarzbeck, FCC, Com-Power, Solar Electronics, PMM, Tekbox, Agilent/HP

  Generic Standards: IEC 61000-6-3, IEC 61000-6-4

  Cost New:

  Was:

  Price Now:

  $590.00 - $14,950.00

  In Stock

  ORDERING OPTIONS