EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  IFI S41-300 0.8 – 4.2 GHz Solid State Power Amplifier

  SKU: 1069

  Weight: 220 lbs.

  Dimensions: (2X) 19 x 25 x 10.5 (W x D x H)

  Frequency range: 0.8 – 4.2 GHz

  Gain: 55 dB min.

  Mains (kVA): 2.5

  P1dB Power: 250 Watts Min.

  Rated Power: 300 Watts Min.

  1 Unit - Modified

  VIEW PRODUCT Cart

• 

  EM Test TSS 500M10 Telecom Surge Generator

  SKU: 11936

  Cost New:

  Was:

  $48,000.00

  Price Now:

  $14,400.00

  In Stock

• 

  Rohde & Schwarz ESRP3 EMI Test Receiver per CISPR 16-1-1

  SKU: 11695

  Frequency Range: 9 kHz to 3.6 GHz

  SSB Phase Noise: –90 dBc (1 Hz) (typ.)

  Frequency Response: 9 kHz ≤ f < 100 kHz < 4 dB

  Dynamic Range: RBW = 1 kHz, f > 10 MHz 110 dB

  Harmonics, nonharmonic spurious: output level = –10 dBm –30 dBc

  RF Output Connector: N female, 50 Ω

  Applications: Differences Between EMI Test Receivers and Spectrum Analyzers

  Test Standards: CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461 and FCC

  Inquire

  VIEW PRODUCT Cart

• 

  Solar 2854-2 Spike Generator for MIL-STD-461F CS106

  SKU: 22505

  Test Standards: MIL-STD-461 CS106

  Spike Amplitude: 10 V to over 400 V peak

  Internal Impedance: 2.0 Ω

  Typically in Stock

  VIEW PRODUCT Cart

• 

  EMC Partner IMU4000 FSDV Compliance Tester for Surge, EFT, Dips & Variations

  SKU: 10466

  Applications and Test Setups: Surge Immunity (Combo/Ring/Telecom Waves), EFT/Burst, Dips Interrupts & Variations

  Standards Met: IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11

  Rental Only

  VIEW PRODUCT Cart

• 

  Narda PMM EP-603 300 kHz - 18 GHz Isotropic E-Field Probe

  SKU: PMM EP-603

  Application/Test Type: Monitoring Electric Field Strengths

  Field Strength Range: 0.17 - 170 V/m (0.01 V/m)

  Frequency Range: 300 kHz to 18 GHz

  Standards Met: IEC/EN 61000-4-3

  Interfaces: Fiber-Optic

  Battery Life: 60-80 hours

  VIEW PRODUCT Cart

• 

  PMM (Narda) AS-03 Broadband Antenna Set, 30 MHz - 6 GHz

  SKU: 10239

  Antenna Factor (1 Meter): -15 +2 dB typical (30 MHz - 200 MHz); 6 dB typical (200 MHz - 3 GHz); 3.5 - 6.5 dBi (800 MHz - 6 GHz)

  Antennas: Kits & Sets

  Application/Test Type: Radiated EMC

  Connector: N-Type(female)

  Dimensions: 65 x 65 x 137 cm (BC-01); 70 x 10 x 86 cm(LP-02); 325 x 8.1 x 18.7 cm(LP-03)

  Frequency Range: 30 MHz - 200 MHz/200 MHz - 3 GHz/800 MHz - 6 GHz

  Gain: 8 - 42 dB typical

  Impedance: 50 Ω nominal

  Maximum Continuous Power: 100 Watts up to 1 GHz (75 watts up to 6 GHz)

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Teseq CAS ISN Calibration Kit for ISN T

  SKU: sku-166

  Weight: approx. 95 g

  Frequency Range: 100 kHz to 100 MHz

  Impedance: 100 Ω

  RF Connector: BNC-type female

  INQUIRE

  VIEW PRODUCT Cart

• 

  Schwarzbeck HHS 5204-12 Circular Helmholtz Coils

  SKU: 30122

  Number of Turns Per Coil: 12

  Maximum Coil Current: 60 A (5 minutes)

  Nominal Coil Current: 30 A (continuous)

  Coil Spacings: 200 mm, 250 mm, 300 mm

  Applications: Radiated Immunity

  Test Standards: EN/IEC 61000-4-8

  Inquire for Lead Time

  VIEW PRODUCT Cart

• 

  LISN-CISPR25-70 Artificial Mains Network (AMN) for Electric Vehicles

  SKU: 8551

  Applications: Conducted Emissions, BCI Testing , Automotive EV EMC

  Frequency Range: 100 kHz – 150 MHz

  Max. con. current: 70 A

  Max. current (limited time): 100 A

  Max. voltage DC: 1000 V

  Impedance: (5 μH + 1 Ω) || 50 Ω ±10 %

  Connector EuT: Wing terminals, 7 mm

  RF output: BNC (optional N)

  Cost New:

  Was:

  Price Now:

  $195.00 - $2,350.00

  In Stock

  ORDERING OPTIONS

• 

  Schwarzbeck HHS 5206-8 Circular Helmholtz Coils

  SKU: 30123

  Number of Turns: 8

  Max. Coil Current: 55 A (5 minutes)

  Nominal Coil Current: 34 A (continuous)

  Coil Spacings: 300 mm

  Applications: Radiated Immunity

  Test Standards: EN/IEC 61000-4-8

  Inquire for Lead Time

  VIEW PRODUCT Cart

• 

  Amplifier Research AR 50A250, 50 Watt CW, 10 kHz - 250 MHz RF Power Amplifier

  SKU: sku-705

  Max Frequency: 250 MHz

  Min Frequency: 9 kHz

  Output Power: 50 Watts

  Applications: RF Conducted Immunity, Medical

  Standards: IEC 61000-4-6

  AC Input Power: 100-240V/1PH/250VA

  Gain: 47dB

  VIEW PRODUCT Cart