EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  Fischer Custom Communications F-2031-A-DCN-23mm Decoupling Ferrite Tube for IEC 61000-4-6

  SKU: sku-727

  Weight: 7.5kG

  Application/Test Type: ferrite decoupling clamp

  Dimensions: Aperture: 23mm Length: 610mm Height: 134mm

  Frequency Range: 100kHz - 100MHz

  Standards Met: IEC/EN 61000-4-6

  VIEW PRODUCT Cart

• 

  EM Test Automotive Test System for ISO 7637-2

  SKU: 10596

  ISO Automotive Standards: ISO 7637-2, ISO 16750-2, ISO 11452-8

  SAE Automotive Standards: SAE J1113, SAE J1455

  Freestyle Mode Micropulses: Programmable Rise time 1us - 10us in steps of 1us; Pulse duration 50us - 10,000us; Int. resistor 2ohm - 100ohm in steps of 5ohm; 200ohm, 400ohm and 450ohm

  Input: DUT supply +/- DC voltage from VDS 200N or any other DC supply; Pulse 5, 7 From one LD 200N

  Micropulse: Micropulse module for test pulses 1, 2A and 6

  Trigger: automatic, manual, external, battery switch

  UCS 200N Models: Built-in coupling/decoupling networks: UCS 200N50, 80V/50A, 100A@500ms; UCS 200N100, 80V/100A, 150A@500ms; UCS 200N150, 80V/150A UCS 200N200 80V/200A

  Verification: As per Annex C of ISO 7637-2:2011 into 50ohm and 1,000ohm load

  Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical Disturbances

  Inquire for availability

  VIEW PRODUCT Cart

• 

  Keytek E503 Ring Wave Simulator for ANSI/IEEE C62.4 and UL 864

  SKU: 10546

  Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.

  Pulse repetition: 1 shot/9 seconds

  Pulse voltage (open circuit): 200V - 6.6kV ± 10%

  Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

  Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864

  Equipment Group: Ring Wave Generators/Simulators

  IN STOCK

  VIEW PRODUCT Cart

• 

  Schaffner CDN 8014 Burst/EFT Coupling Clamp for EN/IEC 61000-4-4

  SKU: 10545

  Compatible Generators: EFT GeneratorsElectrical Noise/Transient Immunity

  Standards Met: IEC/EN 61000-4-4

  Cost New:

  Was:

  Price Now:

  $2,990.00

  Inquire for Availability

• 

  Noiseken ESS-S3011A & GT-30RA Electrostatic Discharge Simulator System for up to 30kV Testing

  SKU: 8250

  Weight: Approx. 7.0kg (gun holder excluded) Approx. 7.5kg (gun holder included)

  Air Discharge Voltage Range: 0.20kV to 30.0kV±5%（30.5kVmax）10.0kV : 0.01kV step 30.0kV : 0.1kV step

  Standards Met: IEC 61000-4-2, ISO 10605

  Battery: AC100V to AC240V 50Hz／60Hz ±10% 75VA

  Contact Discharge Voltage Range: 0.20kV to 30.0kV±5% （30.5kVmax） 10.0kV : 0.01kV step 30.0kV : 0.1kV step

  Polarity: positive/negative

  Pre-Programmed IEC Levels: Yes

  Resolution: 10 Volt steps up to 10 kV; 100 Volt steps to 30 kV

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Em Test CWS 500N1.4 RF Conducted Immunity Test System for IEC 61000-4-6

  SKU: 11251

  Test Capabilities: RF Conducted Immunity

  Standards Met: IEC/EN 61000-4-6

  Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  CDN Test Levels (w/ built-in amplifier): 40Vrms

  BCI Test Levels (w/ built-in amplifier): 8Vrms

  Frequency Range (w/ built-in amplifier): 150 kHz - 230 MHz

  Typically In Stock

  VIEW PRODUCT Cart

• 

  PMM 3010 EMC RF Signal Generator, 9 kHz to 1 GHz

  SKU: 30169

  Frequency Range: 9 kHz to 1 GHz

  Frequency Resolution: 1 kHz

  Frequency Accuracy: ± 10 ppm @ f > 10 MHz

  Level Range: -107 to +10 dBm

  Output Impedance: 50 Ω

  Connector: N-Type (f)

  Applications: Radiated Immunity

  Test Standards: IEC 61000-4-3

  Typically in Stock

  VIEW PRODUCT Cart

• 

  Com-Power FCLCE-1000 Current Probe Calibration Fixture

  SKU: 11601

  Output resistance: 50 Ohms

  RF Connector: N-Type

  VIEW PRODUCT Cart

• 

  EMIC-20 EM Injection Clamp for IEC/EN 61000-4-6 Immunity Test

  SKU: 7851

  Standards: EN/IEC 61000-4-6

  Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling

  Clamp factor (CF): -.5 dB at 100 kHz to -4 dB at 1 GHz (Min -7 dB at 700 MHz

  Connector: N-type female

  Dimensions: 632 mm x 120 mm x 80 mm

  Frequency Range: 10 kHz to 1000 MHz

  Max. Cable Diameter: 20 mm

  Maximum Continuous Power: 0.15 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 5 min; 230 to 1000 MHz: 50 W for 3 min

  Test Setup and Overview: RF Conducted Immunity Testing

  Cost New:

  Was:

  Price Now:

  $595.00 - $8,500.00

  Typically In Stock

  ORDERING OPTIONS

• 

  Teseq NSG 3040 Transient Immunity Test System

  SKU: 4141

  Test Capabilities: Combination Wave Surge Immunity, EFT/Burst, Dips Interrupts & Variations

  Standards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11, IEC 61000-4-29

  Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

  Max EUT Voltage (w/ Built in CDN): 264 Volts

  Max EUT Current (w/ Built in CDN): 16 Amps

  EFT/Burst Pulse Output Capability: 4.8 kV

  Combination/Wave Surge Output Capability: 4.4 kV

  Generic Standards: IEC 61000-6-1, IEC 61000-6-2

  Cost New:

  Was:

  Price Now:

  $1,495.00 - $17,750.00

  In Stock

  ORDERING OPTIONS

• 

  Amplifier Research AT4520 High Power Horn Antenna

  SKU: 9140

  Frequency Range: 2.5 GHz to 7.5 GHz

  Input Power: 1400 Watts

  Gain (over isotropic): 9.5 dBi minimum, increases to 18 dBi at 7.5 GHz

  VSWR: 1.5:1 (max.), 1.3:1 (average)

  Beamwidth (average) at 3 dB down from peak: E & H Plane 30°

  Connector: 7/16 DIN

  Applications: Radiated Immunity

  Cost New:

  Was:

  Price Now:

  $400.00

  In Stock

  ORDERING OPTIONS

• 

  Schwarzbeck HHS 5213-100 Helmholtz Coils

  SKU: 30144

  Number of Turns (per coil): 100

  Max. Coil Current: 15 A, 5 minutes

  Nominal Coil Current: 9 A, continuous

  Nominal Magnetic Field Strength: 900.9 A/m, continuous

  Applications: Radiated Immunity

  Test Standards: EN/IEC 61000-4-8

  Inquire for Lead Time

  VIEW PRODUCT Cart