2 to 3 Months
EMC Test Equipment Categories
EMC Test Equipment Test Equipment, Systems & Solutions
-
-
3ctest PFS A Series Automotive Power Failure Simulator
SKU: sku-1166
Test Standards: LV 124/LV 148, LV 123Applications: Mil-Std-461 CS115Typically In Stock -
Schwarzbeck NNBM 8124-200 Single Path Vehicle AMN (LISN)
SKU: NNBM 8124-200
Applications: Conducted Emissions, BCI Testing , Automotive EV EMCTest Standards: CISPR 25, MIL-STD-461, ISO 7637Max EUT DC Voltage: 1,000 VoltsMax EUT Current: 200 AmpsMax. Voltage (AC 400 Hz): 300 VImpedance: (5µH + 1 Ω) || 50 Ω (+/- 10 %)IN STOCK -
Com-Power ISN-T8 Impedance Stabilization Network and Calibration Kit
SKU: 30149
Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]Current Rating: 800 mA (per line), 1.6 Amps (per pair)Dimensions: see photo in imagesFrequency Range: 150 kHz to 30 MHzIsolation: 150 kHz to 1.5 MHz: 35 to 55 dB 1.5 MHz to 30 MHz: 55 dBMains & EUT Connections: D-sub 25 pin female connectorsRF Connector: 50Ω N-type (female)Standards Met: CISPR 16-1-2, CISPR 22Voltage Rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)Typically in Stock -
CALL FOR LEAD TIME -
3ctest CDN 405T8 Surge Coupler for High Speed Data Lines
SKU: 6911
Application/Test Type: Surge Immunity, Conducted SusceptibilityTest Standards: IEC 61000-4-5Data Transmission Rates: 1,000 MBit/sPoE: YesMax Surge Voltage: 5 kVTypically In Stock -
Inquire for Lead Time -
Com-Power LI-220C 9 kHz - 30 MHz LISN for CISPR 16-1-2/ANSI C63.4
SKU: 10878
Weight: 20.5 lbs / 9.3 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 20 Amperes AC, 14 Amperes DCDimensions: 16.75 x 15.5 x 7.5 inches / 42.5 x 39.3 x 19 cmFrequency Range: 9 KHz - 30 MHzInductors: 250 & 50 microhenry (air-core)Insertion Loss: 6 dB to 1 dBIsolation: 20 dB to 40 dBMains & EUT Connections: Superior Electric SUPERCON® shrouded socketsRF Connector: 50Ω N-type (female)Standards Met: CISPR 16-1-2 / ANSI C63.4Voltage Rating: 270 VAC (Line to Ground), 380 VDC$295.00 - $3,965.00Typically In Stock -
Solar 7054-2 EMI Voltage Spike Generator
SKU: 30184
Test Standards: DO-160 SECTION 17, MIL-STD-462Applications: EMI/EMC For Military Aircraft And AviationSpike Amplitude: 10 - 400 VoltsSpike Repetition Rate: 0.8 - 10 Pulses Per SecondSpike Rise Time: 10 microsecondsRENTAL ONLY -
Fischer Custom Communications F-2031-A-DCN-23mm Decoupling Ferrite Tube for IEC 61000-4-6
SKU: sku-727
Weight: 7.5kGApplication/Test Type: ferrite decoupling clampDimensions: Aperture: 23mm Length: 610mm Height: 134mmFrequency Range: 100kHz - 100MHzStandards Met: IEC/EN 61000-4-6 -
Teseq CIP 9136A Bulk Current Injection Test Clamp
SKU: 8766
Weight: 2 kg (4.4 pounds)Aperture: 43 mm (1.7 inches) inside; 113 mm (4.44 inches) outsideApplication/Test Type: Injecting current levels up to 1 kW per Qinetiq and meets HIRF testing Ideal for automotive BCI testingConnector: N-Type up to 1,000 WattsDimensions: 61 mm wide (2.4 inches)Frequency Range: Features & Specifications of Teseq CIP 9136A:Impedance: 100 Ω typical at resonanceStandards Met: ISO 11452-4, IEC 61000-4-6Additional Standards Met: RTCA DO-160 Section 20, MIL-STD-461$440.00 - $4,400.00Typically in Stock -
EM Test Automotive Test System for ISO 7637-2
SKU: 10596
ISO Automotive Standards: ISO 7637-2, ISO 16750-2, ISO 11452-8Freestyle Mode Micropulses: Programmable Rise time 1us - 10us in steps of 1us; Pulse duration 50us - 10,000us; Int. resistor 2ohm - 100ohm in steps of 5ohm; 200ohm, 400ohm and 450ohmInput: DUT supply +/- DC voltage from VDS 200N or any other DC supply; Pulse 5, 7 From one LD 200NMicropulse: Micropulse module for test pulses 1, 2A and 6Trigger: automatic, manual, external, battery switchUCS 200N Models: Built-in coupling/decoupling networks: UCS 200N50, 80V/50A, 100A@500ms; UCS 200N100, 80V/100A, 150A@500ms; UCS 200N150, 80V/150A UCS 200N200 80V/200AVerification: As per Annex C of ISO 7637-2:2011 into 50ohm and 1,000ohm loadApplications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical DisturbancesInquire for availability