EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  Schwarzbeck VULB 9160 Bilogical Antenna

  SKU: 11284

  Frequency Range: 25 MHz - 1700 MHz

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Schwarzbeck 420 NJ Elements For SBA 9113 Balun

  SKU: 30164

  Applications: Radiated Immunity

  Frequency Range: 360 MHz - 2.7 GHz

  Max RF Input Power: 20 Watts

  Nominal Impedance: 50 Ω

  Connector: N-Type

  In Stock

  VIEW PRODUCT Cart

• 

  Schwarzbeck NNLK 8130 Line Impedance Stabilization Network

  SKU: 8733

  Applications: Conducted Emissions, BCI Testing , Automotive EV EMC

  Test Standards: ISO 60601-1-2

  Additional Test Standards: CISPR 16-1-2, FCC Part 15

  Frequency Range: 150 kHz to 30 MHz

  Impedance: 50 µH || 50 Ω

  Max. Voltage with Option 400/700 B: 400 VAC 50/60 Hz; 630 VDC

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Schwarzbeck NTFM 8131 2-Wire Impedance Stabilisation Network, 9 kHz - 30 MHz

  SKU: 11141

  Test Standards: CISPR 32, CISPR 15/EN 55015

  Max Voltage: 400 Volts AC

  Max Current: 3 Amps

  Impedance: 150 Ω ±20 Ω

  EUT/AE Connections: 4 mm jacks

  Frequency Range: (9 kHz) 150 kHz - 30 MHz

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  3ctest EDS 20H Hand-held 20kV Electrostatic Discharge ESD Simulator

  SKU: 3209

  Air Discharge Voltage Range: 1,000 Volts to 20,000 Volts ±5%

  Contact Discharge Voltage Range: 1,000 Volts to 20,000 Volts ±5%

  Display Monitor: LCD 128 x 64

  Holding Time: Greater than 5 seconds

  Polarity: positive, negative, alternating

  Standards Met: IEC/EN 61326, IEC/EN 61000-6-1, IEC/EN 61000-6-2

  Additional Standards Met: IEC 61000-4-2, IEC 61326

  Additional Standards Met: ISO 10605, ITU-TK.20, GB/T 17626.2

  IN STOCK

  VIEW PRODUCT Cart

• 

  Com-Power LI-325C Line Impedance Stabilization Network

  SKU: 10891

  Application/Test Type: Power line conducted emissions tests

  Current Rating: 25 Amps (AC), 17 Amps (DC)

  Dimensions: 13 x 7.5 x 8 inches / 33 x 19 x 20 cm

  Frequency Range: 10 kHz to 400 MHz

  Inductors: 5 µH (air-core)

  Insertion Loss: 0.3 dB (150 kHz to 30 MHz)

  Mains & EUT Connections: Superior Electric SUPERCON® shrouded sockets

  RF Connector: 50Ω N-type (female)

  Standards Met: RTCA DO-160, MIL-STD-461 LISNS

  Voltage Rating: 270 VAC (Line to Ground), 380 VDC

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  TDK EFG-03 High Power E-Field Generator 10 kHz - 100 MHz, up to 500 V/m

  SKU: 9091

  Weight: 68 kg (150 lbs.)

  Connector type: 7/16 female

  Test Standards: MIL-STD-461 RS103, DO-160

  Applications: Radiated Susceptibility

  Built in Load: Yes

  Max Radiated Field Strength: 500 V/m

  Typically In Stock

  VIEW PRODUCT Cart

• 

  EM Test LD 200N Load Dump Generator for ISO 16750-2

  SKU: 5955

  Output: +/- output Safety laboratory connectors Coupling To the battery +lineDecoupling Via diodeDUT supply Max. 80V/30A

  Freestyle Mode Micropulses: Rise time 1us 10us - 90us with 10us steps 100us - 900us with 100us steps 1ms - 10ms with 1ms steps Pulse duration 10ms - 1,200ms Int. resistor 0.5ohm - 38ohm, in steps of 0.1ohm

  Test Standards: ISO 7637-2 Pulse 5b for 12V and 24V, ISO/WD 16750 Pulse 5b, and much more

  Test Routines: Quick Start, User Defines Routines, Standards Test Routines Service

  Cost New:

  Was:

  Price Now:

  $1,690.00 - $2,290.00

  Typically In Stock

  ORDERING OPTIONS

• 

  Amplifier Research AR 15S1G6, 15 Watt, 0.7 GHz – 6 GHz, RF Power Amplifier

  SKU: sku-703

  Weight: 15.9 kg (35 lbs)

  Dimensions: 50.3 x 15.5 x 37.6 cm 19.8 x 6.1 x 14.8 in

  Flatness: ±1.5 dB typical; ±2.0 dB maximum

  Frequency Range: 0.7–6GHz instantaneously

  Gain: GAIN (at maximum setting): 43 dB minimum GAIN ADJUSTMENT (Continuous Range): 10 dB minimum (4096 steps remote)

  Impedance: 50 ohms

  Input: 90-132, 180-264 VAC; 50/60 Hz, single phase; 210 watts maximum

  Output: POWER OUTPUT @ 3dB COMPRESSION: Nominal, 20 watts; Minimum, 15 watts POWER OUTPUT @ 1dB COMPRESSION: Nominal, 15 watts; Minimum, 12 watts

  RF Connector: Type N female

  RF Input Voltage: 1.0 milliwatt maximum for rated output

  Inquire for availability

  VIEW PRODUCT Cart

• 

  Teseq CIP 9136A Bulk Current Injection Test Clamp

  SKU: 8766

  Aperture: 43 mm (1.7 inches) inside; 113 mm (4.44 inches) outside

  Connector: N-Type up to 1,000 Watts

  Dimensions: 61 mm wide (2.4 inches)

  Frequency Range: 4 kHz - 400 MHz

  Impedance: 100 Ω typical at resonance

  Standards Met: ISO 11452-4, IEC 61000-4-6

  Additional Standards Met: RTCA DO-160 Section 20, MIL-STD-461

  Cost New:

  Was:

  Price Now:

  $440.00

  Typically in Stock

  ORDERING OPTIONS

• 

  Com-Power PS-500 RF Near Field Probe Kit, 9 kHz - 5 GHz

  SKU: 5785

  Applications: EMC Precompliance Testing, Conducted Emissions, Radiated Emissions

  Test Standards: CISPR, MIL-STD-461, FCC

  H-Field Loop Frequency Range: 9 kHz - 5 GHz

  E-Field Broadband Frequency Range: 50 kHz - 5 GHz

  E-Field Fine Tip Frequency Range: 100 kHz - 5 GHz

  Contact Tip Frequency Range: 400 Hz - 5 GHz

  Connectors: BNC (f)

  Impedance: 50 Ω

  Cost New:

  Was:

  Price Now:

  $49.00 - $740.00

  In Stock

  ORDERING OPTIONS

• 

  3ctest PFS 6050A Automotive Power Failure Simulator

  SKU: 3C-PFS6050A

  Voltage Handling: 0 to 60 V

  Test Standards: LV 124, VW80000, GMW 3172, BMW GS 95003-2, Chrysler PF-9326, Cummins 14269(982022-026), DaimierChrysler DC-10842, Fiat 9.90110, Ford EMC-CS-2009.1, DaimlerChrysler PF-10541, Hyundai/Kia ES 96100-02, Hyundai ES 39110-00

  Peak current: 60A duration time 500 ms

  Applications: Automotive EMC Testing

  Cost New:

  Was:

  Price Now:

  $975.00 - $4,975.00

  In Stock

  ORDERING OPTIONS