EMC Test Equipment

EMC Test Equipment Test Equipment, Systems & Solutions

• 

  Rent Agilent (HP) E7401A EMC Analyzer, 9 kHz to 1.5 GHz

  SKU: 10260

  Applications: Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMC

  Pre-programmed Test Limits: FCC Part 15, CISPR 22, MIL-STD-461

  Max Frequency: 26.5 GHz

  Min Frequency: 9 kHz

  Sweep/Test Speed: Moderate

  Amplitude Accuracy: 0.37 dB

  Resolution Bandwidth: 1 Hz to 5 MHz

  Cost New:

  Was:

  Price Now:

  $995.00

• 

  Teseq CDN HSS-2 Surge CDN for High Speed Communication Lines

  SKU: 6195

  Application/Test Type: ISDN, 10/100BaseT, 1000BaseT etc., switchable per jumper, PoE applicable; 2 kV* (1.2/50 μs pulse as per IEC/EN 61000-4-5); Max. surge test current: 50 A (8/20 μs pulse as per IEC/EN 61000-4-5)

  Current Rating: 1 A (rated for Power over Ethernet)

  Insertion Loss: 9 dB at 100 MHz

  Mains & EUT Connections: RJ45 female; HV connector female (Fischer D103A023)

  Standards Met: IEC 61000-4-5 Ed. 3

  Voltage Rating: 100 VDC between pairs

  RENTAL ONLY

  VIEW PRODUCT

• 

  Teseq CDN 117 2-Wire Data Line Coupling Network

  SKU: 6542

  Weight: 2.1 kg (4.6 lbs)

  Application/Test Type: 1.2 / 50 μs pulse up to 6.6 kV

  Coupling: INA 170: spark gap device, 90 V trip voltage; INA 174A: capacitor 0.5 μF

  Current Rating: 1.5 Amps

  Decoupling chokes 1 kHz: 20 mH nominal

  Dimensions: 300 mm x 55 mm x 80 mm

  Ohmic resistance per path: Less than 2.5 Ω

  RF Connector: 4 mm safety banana; Fischer 103

  Series resistor: 2 x 40 Ω, 6 W

  Transmission 3 dB BW: 800 Hz

  Voltage Rating: 250 Volts AC/DC

  Cost New:

  Was:

  Price Now:

  $3,080.00

  In Stock

  ORDERING OPTIONS

• 

  SS100M Solid State RF Power Amplifier Series

  SKU: 9169

  Operating Frequency Range: 100 kHz to 100 MHz

  Power Output: up to 1,500 Watts

  Max RF Input Power: 0 dBm (1 mW) max

  Overdrive Protection: up to +10 dBm for no damage

  Impedance: 50 Ohms

  Applications: Radiated Immunity

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  3ctest CDN 405M40-5 Surge Coupler for Unshielded Unsymmetric Lines

  SKU: 30188

  Test Standards: EN/IEC 61000-4-5

  Applications: Data lines Unshielded, Unsymmetrical Surge Immunity

  Data Rate: 100 Kbit/s

  Surge Voltage Handling: 6kV

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  AR FA7218 Electric Field Measuring Kit

  SKU: 8209

  Frequency Range: 2 MHz – 18 GHz

  Field Strength Measurement Range: 14–1400V/m

  Linearity: ±0.5dB

  Amplitude Accuracy: ±1.0dB typ.

  Test Standards: MIL-STD-461 RS103, DO-160 Section 20

  Applications: Radiated Immunity

  Typically In Stock

  VIEW PRODUCT Cart

• 

  Langer EMV MFA 01 Micro Probe Set 1 MHz to 6 GHz

  SKU: 30012

  Frequency Range: 1 MHz to 6 GHz

  Resolution: 200 µm

  Applications: Conducted Emissions, Radiated Emissions

  Test Standards: CISPR, MIL-STD-461, FCC

  Cost New:

  Was:

  Price Now:

  $195.00 - $2,819.00

  Inquire for Availability

  ORDERING OPTIONS

• 

  Solar 8116-50-TS-100-N MIL-STD-461 EMC LISN

  SKU: SO-8116-TS

  Test Standards: MIL-STD-461

  Applications: Military EMC Testing, Conducted Emissions Testing

  Max Current: 100 Amps

  Frequency Range: 10 kHz – 30 MHz

  Coupling Capacitor: 0.25 µF

  RF Connector: N-Type(f)

  Inductance: 50 µH

  Cost New:

  Was:

  Price Now:

  $195.00 - $2,975.00

  Typically In Stock

  ORDERING OPTIONS

• 

  Schwarzbeck NNBL 8226 MIL-STD-461 LISN

  SKU: 6862

  Frequency Range: 9 kHz - 100 MHz

  Max. cont. current: 70 A

  Max. current (limited time): 100 A

  Max Voltage (DC): 500 V

  Max. Voltage (AC 50/60 Hz): 250 V

  Max. Voltage (AC 400 Hz): 140 V

  Impedance: (50μH + 5 Ω) || 50 Ω (+/- 20 %)

  DC-Resitance mains-EuT: ca. 10 mΩ

  EUT Connectors: Wing terminals

  Test Standards: MIL-STD-461

  Cost New:

  Was:

  Price Now:

  $2,775.00

  Typically in Stock

  ORDERING OPTIONS

• 

  Amplifier Research 15S1G3 RF Power Amplifier

  SKU: 6327

  RF Power Amplifier: 800 MHz to 3 GHz

  Rated Power Output: 15 Watts Minimum

  Input for Rated Output: 1.0 Milliwatt Maximum

  GAIN (at maximum setting): 42 dB minimum

  Input Impedance: 50 ohms

  Output Impedance: 50 ohms, nominal

  1 LEFT

  VIEW PRODUCT Cart

• 

  Amplifier Research 100A400AM20 4 kHz - 400 MHz, 100 Watt RF Amplifier for BCI Testing

  SKU: 12087

  Weight: With Cabinet 18.5 kg (41 lbs) Without Cabinet 10.4 kg (23 lbs)

  Dimensions: With cabinet: 50.3 x 15.5 x 55.1 cm (19.8 x 6.1 x 21.7 in) Without Cabinet: 48.3 x 13.2 x 55.1 cm (19 x 5.2 x 21.7 in)

  Flatness: FLATNESS: ±1.0 dB typical, ±1.5 dB maximum

  Frequency Range: 4kHz–400MHz

  Gain: GAIN (at maximum setting): 50 dB minimum GAIN ADJUSTMENT (Continuous Range) : 20 dB minimum

  Impedance: 50 ohms

  Input: 100-240 VAC, 50/60Hz, 500 watts

  Output: POWER OUTPUT @ 3dB COMPRESSION: Typical: 125 watts, Minimum: 100 watts POWER OUTPUT @ 1dB COMPRESSION: Typical: 85 watts, Minimum: 75 watts

  RF Connector: Type N female

  RF Input Voltage: 1.0 milliwatt maximum for rated output

  VIEW PRODUCT Cart

• 

  IEC/EN 61000-4-X Test Rack for Conducted Immunity Certification

  SKU: 11195

  Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations

  Standards Met: IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11, IEC/EN 61000-4-12

  Applications: Electrical Transient and Noise, Surge Immunity, Power Failures

  Test Setup: Conducted Immunity/Susceptibility Test Setup

  Max EUT Power: 600 Voltas @ 100 Amps

  Peak inrush current capability: 500 A (at 230 V)

  EFT/Burst Pulse Output Capability: 4.8 kV

  Combination/Wave Surge Output Capability: 4.4 kV (in 1 V steps)

  Generic Standards: IEC 61000-6-1, IEC 61000-6-2

  Inquire for Availability

  VIEW PRODUCT Cart